Re: [OSL | CCIE_Voice] Meet Me question - CME GW
all, added to this question it needs tones for callers who join and who leave the conference.. i configure voice class custom-cptones, assigned frequency and cadency but still cannot hear any join or leave tones.. i also assigned this cptones to dspfarm profile as well... any idea what else it needs to make this work.. thank you krishna. From: Bruno Nonogaki brun...@gmail.com To: Kevin Spicer ke...@kevinspicer.co.uk Cc: Online Study ccie_voice@onlinestudylist.com; Krishna vinayak_...@yahoo.com Sent: Wednesday, October 17, 2012 4:05 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW Kevin, This approach sounds good. I will try tomorrow and let you know! Thanks, Bruno On Wed, Oct 17, 2012 at 5:32 PM, Kevin Spicer ke...@kevinspicer.co.uk wrote: Another slightly different idea... Instead of a dummy ephone-dn how about using a voip dial-peer... Voice Serv voip Allow h to h Dial-p v 4321 voip Destination-p 4321 Incoming called-number 4321 Session target ipv4:x.x.x.x Code g711u On 17 Oct 2012 20:33, Bruno Nonogaki brun...@gmail.com wrote: Krishna, By doing this, ephones that doesn't have after-hours exempt cannot join the conference. And neither the PSTN Phone. I am trying to work with cor lists, but no success: dial-peer cor custom name meetme dial-peer cor list to-meetme member meetme dial-peer cor list block-meetme ephone-dn 10 octo number 4321 corlist outgoing to-meetme conference meetme ephone-dn 1 octo ! -- no access to meet-me number corlist incoming block-meetme ephone-dn 2 octo ! -- access to meet-me, no corlist applied number Ephone-dn 1 can initiate meetme and PSTN phones can join it. Ephone-dn 2 cannot initiate meetme, but it is unable to join. I tried to setup another ephone-dn with a forward all to meet-me number, but it doesn't work. Very tricky question... if you find the answer, please post it! Regards, Bruno On Wed, Oct 17, 2012 at 4:22 PM, Krishna vinayak_...@yahoo.com wrote: Randell, under telephony-service define after-hours-block pattern , after-hours day mon 0:00 24:00, repeat it for days tue,wed,thurs,friday,sat,sunday. under ephone-dn where the phones can access meetme number apply after-hours-exempt... and i m sure you will be good. thank youkrishna. From: Rrcrumm rrcr...@yahoo.com To: William Bell b...@ucguerrilla.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Wednesday, October 17, 2012 2:03 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
Krishna, I configured tones and it worked. Please post your config Have a great day! Thanks, Randall From: Krishna vinayak_...@yahoo.com To: Bruno Nonogaki brun...@gmail.com; Kevin Spicer ke...@kevinspicer.co.uk Cc: Online Study ccie_voice@onlinestudylist.com Sent: Thursday, October 18, 2012 12:07 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW all, added to this question it needs tones for callers who join and who leave the conference.. i configure voice class custom-cptones, assigned frequency and cadency but still cannot hear any join or leave tones.. i also assigned this cptones to dspfarm profile as well... any idea what else it needs to make this work.. thank you krishna. From: Bruno Nonogaki brun...@gmail.com To: Kevin Spicer ke...@kevinspicer.co.uk Cc: Online Study ccie_voice@onlinestudylist.com; Krishna vinayak_...@yahoo.com Sent: Wednesday, October 17, 2012 4:05 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW Kevin, This approach sounds good. I will try tomorrow and let you know! Thanks, Bruno On Wed, Oct 17, 2012 at 5:32 PM, Kevin Spicer ke...@kevinspicer.co.uk wrote: Another slightly different idea... Instead of a dummy ephone-dn how about using a voip dial-peer... Voice Serv voip Allow h to h Dial-p v 4321 voip Destination-p 4321 Incoming called-number 4321 Session target ipv4:x.x.x.x Code g711u On 17 Oct 2012 20:33, Bruno Nonogaki brun...@gmail.com wrote: Krishna, By doing this, ephones that doesn't have after-hours exempt cannot join the conference. And neither the PSTN Phone. I am trying to work with cor lists, but no success: dial-peer cor custom name meetme dial-peer cor list to-meetme member meetme dial-peer cor list block-meetme ephone-dn 10 octo number 4321 corlist outgoing to-meetme conference meetme ephone-dn 1 octo ! -- no access to meet-me number corlist incoming block-meetme ephone-dn 2 octo ! -- access to meet-me, no corlist applied number Ephone-dn 1 can initiate meetme and PSTN phones can join it. Ephone-dn 2 cannot initiate meetme, but it is unable to join. I tried to setup another ephone-dn with a forward all to meet-me number, but it doesn't work. Very tricky question... if you find the answer, please post it! Regards, Bruno On Wed, Oct 17, 2012 at 4:22 PM, Krishna vinayak_...@yahoo.com wrote: Randell, under telephony-service define after-hours-block pattern , after-hours day mon 0:00 24:00, repeat it for days tue,wed,thurs,friday,sat,sunday. under ephone-dn where the phones can access meetme number apply after-hours-exempt... and i m sure you will be good. thank youkrishna. From: Rrcrumm rrcr...@yahoo.com To: William Bell b...@ucguerrilla.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Wednesday, October 17, 2012 2:03 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP
[OSL | CCIE_Voice] Meet Me question - CME GW
Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
Randell, under telephony-service define after-hours-block pattern , after-hours day mon 0:00 24:00, repeat it for days tue,wed,thurs,friday,sat,sunday. under ephone-dn where the phones can access meetme number apply after-hours-exempt... and i m sure you will be good. thank you krishna. From: Rrcrumm rrcr...@yahoo.com To: William Bell b...@ucguerrilla.com Cc: Online Study ccie_voice@onlinestudylist.com Sent: Wednesday, October 17, 2012 2:03 PM Subject: Re: [OSL | CCIE_Voice] Meet Me question - CME GW Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
Randall, I don't know if this will work, but its the only thing I can think of... Use cor to ensure that only the initiating phone can call the conference dn. Of course this means that other phones cannot join the conference, so... add another ephone-dn with the same number as the conference dn, but a higher preference. This dummy dn has a forward all to the conference dn, and an outgoing cor that would allow that call. Like I say, just a guess! On 17 Oct 2012 20:03, Rrcrumm rrcr...@yahoo.com wrote: Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
Another slightly different idea... Instead of a dummy ephone-dn how about using a voip dial-peer... Voice Serv voip Allow h to h Dial-p v 4321 voip Destination-p 4321 Incoming called-number 4321 Session target ipv4:x.x.x.x Code g711u On 17 Oct 2012 20:33, Bruno Nonogaki brun...@gmail.com wrote: Krishna, By doing this, ephones that doesn't have after-hours exempt cannot join the conference. And neither the PSTN Phone. I am trying to work with cor lists, but no success: dial-peer cor custom name meetme dial-peer cor list to-meetme member meetme dial-peer cor list block-meetme ephone-dn 10 octo number 4321 corlist outgoing to-meetme conference meetme ephone-dn 1 octo ! -- no access to meet-me number corlist incoming block-meetme ephone-dn 2 octo ! -- access to meet-me, no corlist applied number Ephone-dn 1 can initiate meetme and PSTN phones can join it. Ephone-dn 2 cannot initiate meetme, but it is unable to join. I tried to setup another ephone-dn with a forward all to meet-me number, but it doesn't work. Very tricky question... if you find the answer, please post it! Regards, Bruno On Wed, Oct 17, 2012 at 4:22 PM, Krishna vinayak_...@yahoo.com wrote: Randell, under telephony-service define after-hours-block pattern , after-hours day mon 0:00 24:00, repeat it for days tue,wed,thurs,friday,sat,sunday. under ephone-dn where the phones can access meetme number apply after-hours-exempt... and i m sure you will be good. thank you krishna. -- *From:* Rrcrumm rrcr...@yahoo.com *To:* William Bell b...@ucguerrilla.com *Cc:* Online Study ccie_voice@onlinestudylist.com *Sent:* Wednesday, October 17, 2012 2:03 PM *Subject:* Re: [OSL | CCIE_Voice] Meet Me question - CME GW Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number for the meet me. - Make sure when user join and leave the conference beeps are heard - Only SC Ph1 should have only access to initiate the Meetme numbers, even though Softkeys should be available for all the users. - Only SCph1 should be able to see the conference participants. My config: ephone-dn 5 octo-line number 4321 no-reg primary conference meetme ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected Hold Endcall Trnsfer Confrn Park ! ephone 1 ephone-template 1 ! ephone 2 ephone-template 1 ! voice class custom-cptone leave dualtone conference frequency 300 cadence 300 250 ! voice class custom-cptone Join dualtone conference frequency 700 cadence 300 50 sccp local GigabitEthernet0/1.102 sccp ccm 142.1.66.254 identifier 1 version 7.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/1.102 associate ccm 1 priority 1 associate profile 2 register sc-cfb ! dspfarm profile 2 conference codec g711ulaw codec g711alaw codec g729ar8 codec g729abr8 codec g729r8 codec g729br8 maximum sessions 3 conference-join custom-cptone Join conference-leave custom-cptone leave associate application SCCP ! telephony-service sdspfarm units 2 sdspfarm tag 2 sc-cfb conference hardware max-conferences 12 gain -6 Have a great day! Thanks, Randall ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://www.platinumplacement.com/ ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
Re: [OSL | CCIE_Voice] Meet Me question - CME GW
Kevin, Good call on the voip dial-peer, I was just trying that when I read your mail :-) Randall, I've hacked this together and tested this briefly, so feel free to pick holes in it - this seems to answer the requirement OK, but of course, I may not have thought of all the angles! For brevity, CFB, telephony-service etc. are all configured, they're just not shown here: dial-peer cor custom name LOCK name KEY ! dial-peer cor list NO-MEETME member KEY ! dial-peer cor list MEETME member LOCK ! dial-peer voice 4321 voip preference 9 destination-pattern 4321 session target ipv4:10.10.10.3 ! local loopback interface incoming called-number 4321 dtmf-relay h245-signal h245-alphanumeric codec g711ulaw no vad ! ephone-dn 1 dual-line number 4001 no-reg both description +442075554001 name SC Phone1 ! ephone-dn 2 dual-line number 4002 no-reg both description +442075554002 name SC Phone2 corlist incoming NO-MEETME corlist outgoing NO-MEETME ! ephone-dn 5 octo-line number 4321 no-reg primary conference meetme corlist incoming MEETME corlist outgoing MEETME ! ephone 1 conference admin ! for restricting access to Conference participant list device-security-mode none mac-address .. ephone-template 1 username scph1 button 1:1 ! ! ! ephone 2 device-security-mode none mac-address .. ephone-template 1 username scph2 button 1:2 ! ephone-template 1 conference drop-mode local softkeys idle Redial Newcall Cfwdall Pickup Dnd softkeys seized Pickup Cfwdall Endcall Redial Meetme softkeys connected ConfList Hold Endcall Trnsfer Confrn Park ! It's a pity the features blocked Confrn option in the ephone template doesn't do anything for Meetme conferences, it would seem to be the thing to use otherwise. regards Peter On 10/17/2012 9:32 PM, Kevin Spicer wrote: Another slightly different idea... Instead of a dummy ephone-dn how about using a voip dial-peer... Voice Serv voip Allow h to h Dial-p v 4321 voip Destination-p 4321 Incoming called-number 4321 Session target ipv4:x.x.x.x Code g711u On 17 Oct 2012 20:33, Bruno Nonogaki brun...@gmail.com mailto:brun...@gmail.com wrote: Krishna, By doing this, ephones that doesn't have after-hours exempt cannot join the conference. And neither the PSTN Phone. I am trying to work with cor lists, but no success: dial-peer cor custom name meetme dial-peer cor list to-meetme member meetme dial-peer cor list block-meetme ephone-dn 10 octo number 4321 corlist outgoing to-meetme conference meetme ephone-dn 1 octo ! -- no access to meet-me number corlist incoming block-meetme ephone-dn 2 octo ! -- access to meet-me, no corlist applied number Ephone-dn 1 can initiate meetme and PSTN phones can join it. Ephone-dn 2 cannot initiate meetme, but it is unable to join. I tried to setup another ephone-dn with a forward all to meet-me number, but it doesn't work. Very tricky question... if you find the answer, please post it! Regards, Bruno On Wed, Oct 17, 2012 at 4:22 PM, Krishna vinayak_...@yahoo.com mailto:vinayak_...@yahoo.com wrote: Randell, under telephony-service define after-hours-block pattern , after-hours day mon 0:00 24:00, repeat it for days tue,wed,thurs,friday,sat,sunday. under ephone-dn where the phones can access meetme number apply after-hours-exempt... and i m sure you will be good. thank you krishna. *From:* Rrcrumm rrcr...@yahoo.com mailto:rrcr...@yahoo.com *To:* William Bell b...@ucguerrilla.com mailto:b...@ucguerrilla.com *Cc:* Online Study ccie_voice@onlinestudylist.com mailto:ccie_voice@onlinestudylist.com *Sent:* Wednesday, October 17, 2012 2:03 PM *Subject:* Re: [OSL | CCIE_Voice] Meet Me question - CME GW Hi One requirement is all phones need to have a meet me button Thx Rc On Oct 17, 2012, at 11:34 AM, William Bell b...@ucguerrilla.com mailto:b...@ucguerrilla.com wrote: This may be an oversimplified approach, but couldn't you remove the MeetMe softkey from the ephone via an ephone-template? -- William Bell blog: http://ucguerrilla.com twitter: @ucguerrilla On Oct 17, 2012, at 1:54 PM, Randall Crumm wrote: Hello, I am working on a CME Meet-me question(See below) My question is how do I restrict SCPH2 from iniatiating the MEET ME conference? Question: SITE CPh1 can initiate the meet me conference The other users can call the meet me number and get connected to the conference. PSTN can also access the conference bridge. - 4321 is the number
