Make sure the PRI is up on your router as well:
Show isdn status
L2 should say 'multiple frame established' and if it doesn't you have an
issue. It would likely say 'tei assigned' when there's a problem.
On an mgcp gw the L3 status should say 'cucm manager'.
Troubleshooting guide here:
http://www.cisco.com/c/en/us/support/docs/wan/t1-e1-t3-e3/8131-T1-pri.html
If the PRI is up and you still have issues then its likely call routing
in cucm. Check the css on the pri for inbound and your route
patterns/partitions and the line or device cuss on phones for outbound.
-Justin
(Sent from my phone, please excuse and/or laugh at any typos.)
On Apr 22, 2014 9:12 AM, vikas wankhede vikaswankh...@gmail.com wrote:
Try below debug, it may help,
debug voice ccapi inout
debug isdn q931 detail
debug isdn q921 detail
Thanks.
On Mon, Apr 21, 2014 at 6:48 PM, Dharambir kumar varma
dharambi...@gmail.com wrote:
Hi All
Last week,
I was unable to make ougoing pstn call,even no incoming call.
but service provider telling that pstn line was ok.how can I check on
cucm,
gateway Mgcp/2811
what message it displays in cucm logs.
--
Regards,
Dharambir Kumar
___
Free CCIE RS, Collaboration, Data Center, Wireless Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
___
Free CCIE RS, Collaboration, Data Center, Wireless Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
___
Free CCIE RS, Collaboration, Data Center, Wireless Security Videos ::
iPexpert on YouTube: www.youtube.com/ipexpertinc
