Re: [OSL | CCIE_Voice] Overlapping dial plan

On May 10, 2013 1:02 AM, Dharambir kumar varma dharambi...@gmail.com wrote: Hi sir I am using ur site osl from last 6 month. I have one scenario please help A cucm 7.0 cluster having two location with mgcp gateway having 5xxx overlapping plan. Other side I have one CME at Little rock .how

Re: [OSL | CCIE_Voice] Overlapping dial plan

Will it work as u say On May 10, 2013 2:42 PM, Bill whl...@gmail.com wrote: Why not just create dial peers in CME to match your existing translations and send them over to CUCM? Sent from my iPad On May 10, 2013, at 2:46 AM, Dharambir kumar varma dharambi...@gmail.com wrote: On May 10, 2013 1:02

[OSL | CCIE_Voice] Interdigit timer

Hello sir Is there any option to reduce T302 timer in sip voice gateway as we use in h323. Because we r using variable length dial-plan . Dharambir ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are

[OSL | CCIE_Voice] CUCM upgrade

Hello sir, I want to upgrade CUCM 7.0.1.. to CUCM 8.0.. What is required...for this upgradation. is our existing licences supported ? please help -- * Thanks Regards,* *Dharambir Kumar* ___ For more information regarding industry leading CCIE Lab

[OSL | CCIE_Voice] Cisco SRST Phone

Hi we are using centralized cluster at HQ.when wan link goes down, the remote site router comes in srst mode then in that case ip phone registered to SRST.will these phones will use the license of CUCM DLU in case of wan failure -- * Regards,* *Dharambir Kumar* Mob:09902322041

[OSL | CCIE_Voice] Mgcp

Hi Someone added ip domain name in mgcp gateway.i was not aware with it.but I tried all troubleshooing, But not found.finally I checked configuration and disable domain name. Is there any way to find immediate solutionin mgcp ___ For more

[OSL | CCIE_Voice] Cucm licensing

If cucm license units are fully used, Can we add new phones.if yes will it be registered. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out

[OSL | CCIE_Voice] Presence licensing

Hi how cucm license is related to presence license. A little confused ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out

[OSL | CCIE_Voice] Cisco IP Phone over the internet

Hi i have a cisco 7941 phone which is connected to broadband internet. but is not registering to cucm.we are using Cisco ASA and CUCM at HQ where CUCM IP address has been natted to public ip... when we press Status on Phone,it displays CTL file not installed. -- Please help how to make it

[OSL | CCIE_Voice] Cisco ip phone over internet

Hi Please help how to register ip phone over internet.. What parameters are required on cucm and phone. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job?

[OSL | CCIE_Voice] Registering phone

Hi we r using cucm at hq.we have to register one 7941 phone connected with broadband internet.please help the procedure to register. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or

[OSL | CCIE_Voice] Isdn channel order

Hi top to botton isdn channel =? 1 to 31 or 31 to 1 which one is by default. confused -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and

[OSL | CCIE_Voice] Phone displaying unregistered

Hi we have some phones registered on CUCM 7.0 when we check them on RTMT,some of the phones it display unregistered even those are ringing. why ? i am shocked...i am checking in (Callmanager-Device search-Phone) on RTMT tool. -- Regards, Dharambir Kumar

[OSL | CCIE_Voice] Cucm log

Hi Can we delete the audit logs on cucm which is seen on Rtmt tool. Is it possible ... ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out

[OSL | CCIE_Voice] Cucm log

Hi Can we delete audit logs on cucm Which can be seen on Rtmt tool. Is it possible ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out

[OSL | CCIE_Voice] Firmware

Sir I have a avaya ip phone .want to upgrade to sip.currently showing h323 .how to do please help ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check

[OSL | CCIE_Voice] Avaya firmware upgrade

hi how to upgrade avaya ip phone firmware upgrade to Sip firmware please help i am trying to upgrade by TFTP server on PC but phone displays server unreacable but from pc tftp server we are able to ping. please help help. -- Regards, Dharambir Kumar

[OSL | CCIE_Voice] Route-pattern

Hi i am using a route pattern 0.00! ; It was checked provide outside dial tone.. this was working fine... but I unchecked provide outside dial tone still it is working...not affected.is it possible or am i wrong somewhere ? ___ For more information

[OSL | CCIE_Voice] IP Phone

Hi can i connect IP phone PC port to Switch.. -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out

[OSL | CCIE_Voice] SNMP callmanager

Hi Can anyone guide me how to configure SNMP in Call manager so that we can monitor on SNMP tool.. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check

[OSL | CCIE_Voice] Ccie voice lab version

Hi Would u telll which ccie voice lab version is latest. ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com

[OSL | CCIE_Voice] sip trunk

Hi please tell what parametres are required to integtate CUCM and siemens sip trunk.. we have already configured sip trunk on both sides but one way calling is there from CUCM we are not able to call seimens extension how can we trace trunk logs on rtmt please help if u can -- Regards,

[OSL | CCIE_Voice] SIP Trunk

Hi this is Dharambir here i created a sip trunk on CUCM 7.0 with other cluster.. i am tryinng to make call over sip trunk.. how can i trace that can show where the call is hitting.. i already used dail number analyser but not satisfying.. please -- Regards, Dharambir Kumar

[OSL | CCIE_Voice] voice lab

Hi All, I am preparing for CCIE Voice lab exam.. I require any cert topologies along with the answers (cciecert papers). Please, let me know if there is any availability for this or group buy offer available. Waiting for warm response. -- Regards, Dharambir Kumar

[OSL | CCIE_Voice] Mgcp

Hi I have two router one is reliance link and second is tata. Reliance is primary and tata is backup Reliance routr is mgcp gateway.now we want to make tata routr also as mgcp gateway..can we do itif we do then call should be forwarded to reliace router since it is primary. Is any solution...

[OSL | CCIE_Voice] Voice mail issue in Overlapping dial plan

Hi All, We have same extension range of 65XX both in Location A as well as in Location B. For dialing Location B extension we use prefix 81 . For dialling Location A extension we use prefix 80 . Location A to Location B-- 8065XX Location B to Location A- 8165XX Now the problem is if we want to

[OSL | CCIE_Voice] Cisco unity/CUCM

HI when a PSTN user dial a cisco phone user extension 212620-4001,it plays like Press 1 for Billing department---(5001) Press 2 for others ---(4001 itself) how could we implement for the user 4001. -- Regards, Dharambir Kumar ___ For more

[OSL | CCIE_Voice] CUPC

Hi Team. i have one phone CUPC over internet...and one cisco 7941 phone internal.. both registered to call manager. when i call from cupc to 7941 or viceversa,,ring out happens and when call is connected, only dead air/ No audio.. where can i check...

[OSL | CCIE_Voice] unity express

Hi Team, Can we integrate unity express-Cme to Ldap.. -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out

[OSL | CCIE_Voice] overlapping dialplan using voice messaging through cisco unity.

Hi Team, i have two location uk and india. both are using overlapping dial plan 5xxx.they are working fine by using translation pattern on CUCM. Right now india cisco phone user 5xxx are using voice messging thorough unity. but uk 5xxx extensions users are not using.But now we need to give the

[OSL | CCIE_Voice] Ip expert video

Hi Can anyone tell me where can i find the VIK MALHI Ip Expert VOice Troubleshooting Video.. -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and

[OSL | CCIE_Voice] Guide Me

Hi All, I have one branch site At UK and on HQ site at Mumbai. when i call from India to UK , two way audio is perfect. but whe the call comes from UK to India, Audio is intermittent,Uk user can not hear but india user is hearing. There is One firewall at UK and one firewall at India through

[OSL | CCIE_Voice] Callier-Id Unkown in MGCP

Hi all incoming calls coming from PSTN is displaying Unkown on Cisco ip Phone. Gateway is Mgcp.we are able to talk but callied id is Unknown.Please guide me -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab

[OSL | CCIE_Voice] Caller id Unknown in MGCP Incoming PSTN calling

Hi dear, Can You please check the debugs Ip phone is displaying unknown number Please chek terminal monitor welsp482-hydecheshi-2197721# welsp482-hydecheshi-2197721#debug isdn q931 debug isdn q931 is ON. welsp482-hydecheshi-2197721# welsp482-hydecheshi-2197721#

[OSL | CCIE_Voice] Faxes are not working

Hi My faxes are not working... where should i checkMy router is MGCP gateway... Below are config on Mgcp router.. voice-port 0/1/0 description Cheadle FAX station-id name Cheadle FAX station-id number 5867 caller-id enable ! voice-port 0/1/1 station-id name Cheadle FAX station-id

Re: [OSL | CCIE_Voice] Faxes are not working

phone or other analog device) and it rings? What codecs and are you using modem passthru/relay? Lan only or lan and wan between 2 fax or fax and pstn?) On Aug 20, 2013 6:18 AM, Dharambir kumar varma dharambi...@gmail.com wrote: Hi My faxes are not working... where should i checkMy

[OSL | CCIE_Voice] Softkey template parameter

Hi All can u please guide.. difference between Transfer/ Direct transfer/connected transfer. in cisco IP Phone Softkey template -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit

[OSL | CCIE_Voice] Voice mail to user

Hi ALL, can we provide voice mail facility to a user having multiple cisco phone extensions when some body dial 3002, if no answer it should go to A user voice mail ..dial 3005 if no answer it should also go to A user voice mail. means go to same user voice mail.

Re: [OSL | CCIE_Voice] Voice mail to user

:53, Dharambir kumar varma dharambi...@gmail.comwrote: Hi ALL, can we provide voice mail facility to a user having multiple cisco phone extensions when some body dial 3002, if no answer it should go to A user voice mail ..dial 3005 if no answer it should also go

[OSL | CCIE_Voice] Unity express email-notification of voice message

Hi i am unable to fix how a user should recieve email notification for voice message. Unity express 7.X integrated with CME please suggest... response will be highly appreciated! -- Regards, Dharambir Kumar ___ For more information regarding

[OSL | CCIE_Voice] CUCM

Hi All, Please suggest. !.After uploading phone licence,do we need reatart the CM services or Server. -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a

[OSL | CCIE_Voice] CCIE collaboration

Hi All I have to purchase CCIE collaboration workbook in group. is there any one who is going to purchase..?? -- Regards, Dharambir Kumar ___ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are

[OSL | CCIE_Voice] Call forwarding

I have my extension, 8843,registered to callmanager express, forwarded to 1515.As of today when someone calls my extension and it switches over to 1717, they get a fast busy. changed the forwarding to manual and tried 1515 and the tollfree number but not working.. we one dial peer as dial-peer

[OSL | CCIE_Voice] ISDN mgcp call

Hi When i dial from pstn to my Cisco ip phone DID number 86405,(00971-481-86405), called number displays as 8186405.in debug isdn q931 We have already selected 5 significant digit.but phone is not ringing.even i am hearing ring back tone. and when we make outgoing pstn call from same ip phone

[OSL | CCIE_Voice] caller id not displaying correctly on receiver side

Hi All when I make pstn call, my phone extension caller id is not displayed in receiver phone. it is displayed something reception number like that. below are the debugs which I am sending to pstn. will number type or plan type setting required to achieve.. Apr 11 11:43:48: ISDN Se0/1/0:15

[OSL | CCIE_Voice] Toll free number translated to my desk cisco phone

Hi all I have purchased one DID number 8000 toll free . I want when pstn user dial this number it must be forwarded to my one of desk extension(which is DID capable) can we do some translation in cucm Thanks in advance for reply -- Regards, Dharambir Kumar

[OSL | CCIE_Voice] PSTN incoming /outgoing not working

Hi All Last week, I was unable to make ougoing pstn call,even no incoming call. but service provider telling that pstn line was ok.how can I check on cucm, gateway Mgcp/2811 what message it displays in cucm logs. -- Regards, Dharambir Kumar ___

[OSL | CCIE_Voice] BAT

Hi All how can we give access to a user in cucm Bulk Administration Phone Generate Phone Reports . Thanks in advance -- Regards, Dharambir Kumar ___ Free CCIE RS, Collaboration, Data Center, Wireless Security Videos :: iPexpert on YouTube:

[OSL | CCIE_Voice] Bulk admin tool

Hi 'how can we give access to a cucm user or applicatiction user to generate phone reports using BAT. I don't want to allow this user to update or write access to cucm,but only BAT for generating reports.rest of things he is allowed to read only -Thanks in advance Regards, Dharambir Kumar

[OSL | CCIE_Voice] Phone Directory issue

Hi I am having two clusters US and Europe. Both are using ICT (non-gatekeeper controlled trunk),But europe cluster users are complaining that unable to see US users in phone directory but they are able to see local users. where is the issue.All cluster are LDAP sync. Please assist!! Thanks in

[OSL | CCIE_Voice] Cisco Phone 8831

Hi All, Would you please let me know that 8831(conference phone) cisco phone is supported on cucm version: 7.1.3.32900-4. Because when i am trying to add new phone 8831 is not in the list. Appreciate your comments. -- Thanks Regards, Dharambir Kumar

[OSL | CCIE_Voice] UCCX

Hi Can someone give me the info. that UCCX has one paper or two paper. what is the exam number.I searched on cisco site showing 642-165 and 500-051 are there. -- Regards, Dharambir Kumar ___ Free CCIE RS, Collaboration, Data Center, Wireless

[OSL | CCIE_Voice] contact center upgrade

Hi Can we upgrade ccx 7.x to 10.x directly. Thanks in advance -- Regards, Dharambir Kumar ___ Free CCIE RS, Collaboration, Data Center, Wireless Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc

[OSL | CCIE_Voice] iphone supported on 7.x CUCM

Hi All, Does CUCM 7.x supports to configure iphone. when we do add new, there is no *iphone* in select phone type button. Thanks in advance. -- Regards, Dharambir Kumar ___ Free CCIE RS, Collaboration, Data Center, Wireless Security Videos ::

[OSL | CCIE_Voice] UCCX agens not ringing

Hi All, I have two agents both skill 5 assigned. both are ready state. when i call trigger number it plays the welcome message and after that remains on Queue.it does not ring any one. Cisco phone are logged in(Cisco extension 33xxx /IPCC extension 38xxx) CAD is login and in ready state Thanks

Re: [OSL | CCIE_Voice] migration of VM pilot to different Number

that defines the 4-digit extension to which the call is transferred. On Fri, Jun 20, 2014 at 4:53 PM, Dharambir kumar varma dharambi...@gmail.com wrote: Hi All, Please help in this. I am using cucm 7.x and uccx 7.x we are using window based voice messaging integrated with cucm.The pilot number

[OSL | CCIE_Voice] migration of VM pilot to different Number

Hi All, Please help in this. I am using cucm 7.x and uccx 7.x we are using window based voice messaging integrated with cucm.The pilot number we are using 7000, when someone call to call center, the call goes to agent depending on availabilty, if not recieved then go to agent voice mail(VM Now

[OSL | CCIE_Voice] Hunt Group Voice Mailbox set up.

Hi All, We have 2 extension with DID, 10001 - 40832423301- CiscoPhone- with VM enabled 10002- - 40843677702 -Cisco Phone- with VM enabled. One Hunt pilot- 2 - 40822212355;we created hunt list and line group and associate above two phones. when customer dials huntpilot DID (4082221255)

[OSL | CCIE_Voice] Caller name Display on PSTN

Hi All, Would you suggest in below scenario. We are using Cucm 7.1 with Mgcp gateway at one location.each user is having DID number. When they call outside normally it displays thier DID to called party device, but we require to display Company Name with 18 or at least company name

[OSL | CCIE_Voice] Extenal call not happening.

Hi All, Good morning!! my MGCP gateway is registered. Sh ccm manager is registered. Isdn status is multiframe established. Incoming calls are hitting gateway and ringing the Phone but we are unable to make ouside call. when we make call outside it does not hit MGCP gateway (debug isdn q931).

[OSL | CCIE_Voice] virtual memory utilization by Tomcat service

Hi All, I are getting virtual memmory utilization error on Publisher CUCM 7.X. Can anyone suggest to fix this. -- Regards, Dharambir Kumar ___ Free CCIE RS, Collaboration, Data Center, Wireless Security Videos :: iPexpert on YouTube:

[OSL | CCIE_Voice] Caller id name

Hi All Good day!!! I am using cucm 7.1.3, we are using mgcp gateway with T1 line. is it possible that one DID number 510-240-2333 user for a campaign, which direct to extenion 10001. suppose one pstn user is calling to this number 510-240-2333, it rings my ext 10001. it displays user caller id

[OSL | CCIE_Voice] PRI Down Logs

Hi Friends, Can you help me on this. I am using MGCP voice gateway with PRI line. For a time PRI link was down. The service provider is telling that no PRI down. but I need to check and confirm on CUCM and Gateway part where I can find logs(RTMT trace), I mean what message I will see on trace