Kapil,
Post your config of BR1.
On Wed, Feb 25, 2009 at 7:40 AM, Kumar, Narinder narinder.ku...@uxcg.com.au
wrote:
Why do you give the same add to pub and Sub ? Trying giving pub and sub
different multicast base address
*From:* Kapil Atrish [mailto:kapilatr...@hotmail.com]
*Sent:*
Cliff,
When you dial the international number with #, it will conclude that's the
route pattern to take and Call Manager will not send the #.
Question 2, you can used either as long as TEHO works.
On Tue, Feb 24, 2009 at 12:28 PM, Cliff McGlamry cl...@mcglamry.net wrote:
Two questions about
Make sure during the initial install that you allocate 74GB of hd and @
least 2GB of ram.
On Sat, Mar 21, 2009 at 2:35 PM, ccielab...@gmail.com wrote:
Any tricks to getting CUCM 7 working on ESXi ? My install keeps failing .
I haven't invested too much time yet, as I'm trying hard to pass with
After install, you can give it limited memory and it will work. Initial is
when it needs the resources. Does UCCx 7 runs on Windows or is it Linux.
If it's Linux just choose redhat 4/5.
On Sun, Mar 22, 2009 at 4:16 PM, Jeff Garvas j...@cia.net wrote:
I have a P4 3Ghz with 4gb running ESXi.
Take a look at the link. It might have already expired but just keep an eye
out on that forums.
http://www.fatwallet.com/forums/hot-deals/907712?highlight_key=ykeyword1=dell+quad
On Sun, Mar 22, 2009 at 5:12 PM, Mike O mik...@msn.com wrote:
Cliff,
I'm running ESXi on a Dell 530 w/Q6600,
Reset your RIS collector, also verify on CCM admin page of PUB and SUB that
it shows registered. Sometimes The Pub doesn't reflect even though the SUB
shows registered.
On Thu, Mar 26, 2009 at 2:36 PM, Devin Chamberlain
dchamberl...@unislumin.com wrote:
I have seen this before with PRI's ...
If the exam states to use the SUB as primary and PUB as secondary for
everything, unless noted to not too, then it's a given that you should know
only gw-priority will work.
On Sat, Mar 28, 2009 at 11:55 AM, Cliff McGlamry cl...@mcglamry.net wrote:
I agree with Jin,
With a single zone and
Are you calling from CCM to CME and forward to CUE? Voice service voip ties
in 2 VOIP call legs.
On Sat, Mar 28, 2009 at 1:23 PM, Chris Parker cpar...@cparker.us wrote:
OK now my question is ... what does the no voice service voip do? I can
still call from my phone to CUE etc. Does it break
How would I achieve this?
User at Site C should press 24XXX, then it will forward to user's voice
mailbox greeting.
E.g. when user dial 24001, then it will be forwarding directly to 4001 VM
and leave a message. This call routing should work over the WAN also.
My solution:
ephone-dn 20
number
with the
destination patten of: 2[23]...
Chris
Duy Nguyen wrote:
How would I achieve this?
User at Site C should press 24XXX, then it will forward to user's voice
mailbox greeting.
E.g. when user dial 24001, then it will be forwarding directly to 4001 VM
and leave a message. This call
Yes.
On Sun, Mar 29, 2009 at 2:37 PM, adefila seun adefilabi...@yahoo.co.ukwrote:
Hello,
You are saying that it could be showing registered on the SUB and not
reflect on the PUB?
Regards
--- On *Sat, 28/3/09, Duy Nguyen ccieid...@gmail.com* wrote:
From: Duy Nguyen ccieid...@gmail.com
CDP isn't a duplex issue. If the port is connecting to a PC, sometimes it's
best to hardcode it to 100Mb Full.
On Tue, Mar 31, 2009 at 2:43 AM, adefila seun adefilabi...@yahoo.co.ukwrote:
Hello All,
On the fastethernet port connecting to the core switch, i have the duplex
setting as auto
Jin,
Remove the FXS, configure Transcoding for 2 sessions, see if it works then
shutdown and plug the fxs back in. Always insert the VIC's from right to
left.
On Sun, Mar 29, 2009 at 10:32 PM, CCIE OSL ccie...@gmail.com wrote:
I have purchased a 1760 router with PVDM-12 and CME.and FXS
Just
On the HQ side.
On Tue, Mar 31, 2009 at 9:57 AM, ccie Me ccievoic...@yahoo.com wrote:
Hi
i have a basic question :) if i need to call from cm site to crs pilot
number via gatekeeper, do i need to add a transcoder, in case i need this,
where should i apply this transcoder?
Thx
Why don't you try it yourself if you already have the hardware. Do a search
and you should get a lot of hits that AMD isn't supported.
On Wed, Apr 1, 2009 at 11:44 AM, kapil atrish nice_cha...@yahoo.com wrote:
Hi list,
I want to know if CCM 7 is supported on VMWare workstation 5.0? The
Erwan,
Looks like I emailed Anil only instead of the whole group yesterday.
fromDuy Nguyen ccieid...@gmail.com
toanil batra anil...@yahoo.com
dateMon, Mar 30, 2009 at 8:05 PM
subjectRe: [OSL | CCIE_Voice] dspfarm profile conference ?
mailed-bygmail.com
hide details Mar 30 (1 day ago) Reply
Try
Cliff,
James is correct. You can block with translation patterns.
On Wed, Apr 1, 2009 at 7:09 PM, Cliff McGlamry cl...@mcglamry.net wrote:
James,
Yes. WIth a translation pattern there is no option to block this call.
Route patterns allow you to block, and you can also provide a block
How do you fix this annoying issue when after I reverted the snapshot the
vmware images of Pub and Sub, something keeps typing k. I have already
rebooted but to no effect. I'm using VMware Server 2.0. I also notice this
on Proctorlabs as well. My Unity image is fine after snapshot revert.
an image bug.
Thks
--- On *Fri, 3/4/09, James Key j...@jackhenry.com* wrote:
From: James Key j...@jackhenry.com
Subject: Re: [OSL | CCIE_Voice] Annoying VMWARE Server kkkKkkk
To: Duy Nguyen ccieid...@gmail.com, OSL Group
CCIE_Voice@onlinestudylist.com
Date: Friday, 3 April, 2009, 6:24 PM
Why would the Sub be primary for IPCC?
On Sun, Apr 5, 2009 at 12:39 PM, Tech Guy tech...@oletu.com wrote:
Do one use the same logic in IPCC, Unity, H323 Dial-peers; MGCP,
Gatekeeper, etc? i.e. The Sub shld be the primary and Pub the secondary?
Tech Guy
- Original Message -
Make sure you have DID configured on the inbound dial-peer pots.
On Sun, Apr 5, 2009 at 9:51 PM, Erwan Erwan e_er...@yahoo.com wrote:
hi,
calling from PSTN to BR-2 , can not go thru, and debug isdn q931 saying
network-out of order , dial-peer is *correct *
**
anybody have idea, what
So 21313001 is sending to CCM, how is that trunk configured for significant
digits?
On Sun, Apr 5, 2009 at 10:10 PM, Erwan Erwan e_er...@yahoo.com wrote:
hi Cliff and Day,
right, ext 3001 in CCM, the debug that I sent before, showing call hit
the BR-2 and correct dial-peer in BR-2
Cliff is saying maybe the phone is in a partition where the trunk has a CSS
where it wouldn't ever reach the phone. The best is to leave everything
without partitions and then start hardening from that point.
On Sun, Apr 5, 2009 at 10:37 PM, Erwan Erwan e_er...@yahoo.com wrote:
hi cliff
CCM
Are you trying to make a subscriber from the publisher vm?
On Sun, Apr 5, 2009 at 11:36 PM, CCIE OSL ccie...@gmail.com wrote:
I run into little minor problem today.
I am using VM for my home lab, I just copied one VM to another PC and now I
am trying assign it as second CCM.
I change IP and
I don't think that will work.
On Mon, Apr 6, 2009 at 12:03 AM, CCIE OSL ccie...@gmail.com wrote:
Yep!
Not too fun,,
Duy Nguyen wrote:
Are you trying to make a subscriber from the publisher vm?
On Sun, Apr 5, 2009 at 11:36 PM, CCIE OSL ccie...@gmail.com wrote:
I run into little
Determine what you need for call processing of 11000 phones.
On Tue, Apr 7, 2009 at 1:23 PM, Darren T. Manners dmann...@me.vccs.eduwrote:
I have question to pose. We have 23 colleges. Each college tends to run its
own call manager. Our systems office was asking me what drawbacks are there
Web into phone doesn't show mcast traffic.
On Wed, Apr 22, 2009 at 7:01 PM, saralilin2...@yahoo.co.jp wrote:
i think you can just web into the phone ip, see if there is mcat traffic?
*zamuel del Toro sdelto...@hotmail.com* wrote:
Some bady know if exist a phone remote control to test moh
Your call is failing because HQ phone to GW is G711 which requires 80Kbps
yet your location on the phone is only 48kbps.
On Fri, May 1, 2009 at 11:02 AM, jeremy co jeremy.coo...@gmail.com wrote:
Hi,
Is set up a simple scenario for call from HQ to 911 on pstn.
HQ region : G711 within
HQ
If I only have 1 leg, will I still be able to Tango? Oh you meant 2 as a
couple. :)
On Mon, May 4, 2009 at 10:28 AM, Vik Malhi vma...@ipexpert.com wrote:
For every call that is made in CCM, a location deduction is made for both
the source and destination location.
AS far as I have
time:-)
Larry Hadrava
CCIE #12203 CCNP CCNA
Sr. Support Engineer – IPexpert, Inc.
URL: http://www.IPexpert.com http://www.ipexpert.com/
On Mon, May 4, 2009 at 4:14 PM, Duy Nguyen ccieid...@gmail.com wrote:
If I only have 1 leg, will I still be able to Tango? Oh you meant 2 as a
couple
Is using external mask checked under calling information?
On Mon, May 4, 2009 at 7:04 PM, jeremy co jeremy.coo...@gmail.com wrote:
Hi,
I want to restrict caller iD for particular pattern.
Default on RL-RG
Restrict on RP (both Calling Line ID Presentation and Calling Name
Presentation )
What commands and services param have you enabled/disabled?
On Thu, May 7, 2009 at 4:57 PM, Onur Tufekci onurvc...@gmail.com wrote:
I been trying the call preserve trick everytime I set up H323 gateway. Out
of 10 I got it to work only once. Is there any trick to this?
Dell PowerEdge T100 $329.
Load ESXI and you're good to go. Don't forget to upgrade the memory.
http://configure.us.dell.com/dellstore/config.aspx?acd=10466193-361116-FW7vkwglc=uscid=7421cs=04dgc=BFkc=productdetails~server-poweredge-t100l=enlid=197378oc=bedwa1ks=bsdfb=1
PowerEdge T100
Dual
Try speed 100/full.
vineet sanghi vineet_san...@yahoo.com wrote:
I am getting following message on switch port which connects to VM machine.
0:49:01: %CDP-4-DUPLEX_MISMATCH: duplex mismatch discovered on
GigabitEthernet1/0/1 (not half duplex), with cucx eth0 (half duplex).
10:49:08:
Service param, offnet to offnet = false. For cme, tansfer pattern
James Oberhaus joberh...@gmail.com wrote:
If I wanted to prevent toll fraud at HQ, BR1 and BR2 by only allowing uses
to forward 4 digits what would be the best/fastest approach? I assume at
BR2 the easiest would be
Post the config
Kevin Hogan (kevhogan) kevho...@cisco.com wrote:
Call from CUCM to CME BACD (lab v2 code)...
1) Works fine on the first call from CUCM and CONTINUES to work fine IF
I actually push a key on the CUCM phone so that BACD can route the call
to the appropriate hunt list.
2) Works
36 matches
Mail list logo
