Thanks!
On Tue, Nov 26, 2013 at 5:03 PM, mesters wrote:
> YES!, this new card will work (once properly set-up under linux). I
> triple checked the new k600 card actually has a dual-link DVI and it has.
> So, no problem linking it to the VG278HR.
>
> It is listed "windows only" because it lacks
YES!, this new card will work (once
properly set-up under linux). I triple checked the new k600 card
actually has a dual-link DVI and it has. So, no problem linking it
to the VG278HR.
It is listed "windows only" because it lacks the 3-pin
connector...
Dear all,
Thanks to all for the information, especially to Jeroen for the detailed
comments and thanks to Kay for the Wiki link, that was really helpful!
So one possible option among others seems to be:
- NVIDIA Quadro K600
- Asus VG278HR
Just to get it right: Although the K600 is listed under
I'm using a 24" BenQ XL2420TX (emitter builit-in; price 500€) monitor connected
to the DisplayPort of a Quadro FX 380 card. Works very well on 64bit
ScientificLinux 6.4 with the kmod-nvidia driver from ElRepo.
Please also see
http://strucbio.biologie.uni-konstanz.de/ccp4wiki/index.php/Stereo .
Hi David,
We have had success with the ASUS VG248QE connected with DisplayPort, on an HP
Z620 running RHEL 6.4.
We like to have dual stereo displays on Linux, and Nvidia is discontinuing many
of the cheaper multi-DVI-port cards. We had no success trying to take two Acer
DVI monitors and conn
On 11/21/13 07:50, mesters wrote:
...(both handle the dual link DVI-D standard)...
Are there any monitors on the market yet which can produce stereo 3D
from a Displayport 1.2 input? With or without a built-in emitter.
--
==
Sorry, I have to correct a wrong
statement in my previous email..
I own a CLUB 3D mini displayport to active dvi dual link adaptor
330 mhz stereo 3d gaming cable (the 270 mhz model is the wrong
model so do not buy the 270 mhz one!!!)
- J. -
I second everything Jeroen said except the need for a €450 graphics
card. We have a Quadro 600, which was only £105 or something like that.
The slightly cheaper Quadro 400 would have worked as well. There are
now successors to these cards. Unless something has changed in their
specification
The quadro 600 or k600 works fine, been using it for more than a year with
that Asus with the built in emitter. In fact the absolute oldest and
cheapest option which works is the quadro 370, but you'll want the 600 at
least.
On Thu, Nov 21, 2013 at 9:19 AM, mesters wrote:
> Hi Andreas,
>
> the
Dear all,
We are looking into ordering a stereo monitor. I am aware that this
question comes up every so often on this BB (and I read the post by Alice),
but maybe someone has any comments or recent experience with passive vs.
active monitors?
And: Which graphics card can you recommended? The mon
Yes, it works with PyMOL and COOT using the 'quad buffered stereo' /
'hardware stereo' option, respectively.
Best wishes,
Christoph
Hi Christoph,
Thanks so much for your information. This is very helpful for us.
One more question, will the *ASUS VG278H work with Pymol and coot?*
Thanks so much
On 03/01/2013 06:52 AM, mesters wrote:
Just make sure the graphics card has not only miniDisplay
connectors... The 3D monitors mostly have HDMI and DVI-D.
Do not confuse the DVI-D with single/simple DVI as the bandwidth will
be too low for stereo.
1) Monitors with 120 Hz stereo support an
We use the ASUS VG278 monitor with built-in IR emitter under
linux.Stereo works perfectly without 3 pin connector.
Monitor is connected via (dual-link) DVI cable (stereo option 10 in
xorg.conf). This should work with any Quadro card.
The monitor is big and esp. bright in 3D due to it's NVIDIA 3
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dear Qixu Cai,
I don't know - Alwyn Jones would, of course.
Regards,
Tim
On 03/01/2013 02:54 PM, Qixu Cai wrote:
> Dear Tim,
>
> Does the program of O support only the quad-buffered stereo mode,
> not the Zalman mode?
>
>
>
> Qixu Cai Email: cai
Dear Tim,
Does the program of O support only the quad-buffered stereo mode, not the
Zalman mode?
Qixu Cai
Email: caiq...@gmail.com
School of Life Sciences,
Xiamen University, Fujian, China
2013/3/1 Tim Gruene
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Dear Jl,
>
> the Zalmans are
And that is because the emitter is powered by the screen and its
presence is detected via the HDMI monitor cable (and the signal to the
emitter is sent the same way). Use of these screens is via different
driver option (stereo option of 12) and there is a more limited range
available.
I have no ex
the defects might not be noticeable on
normal brightness.
Kind regards,
Dmytro.
From: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of jlliu liu
Sent: Friday, March 01, 2013 12:56 AM
To: CCP4BB@JISCMAIL.AC.UK
Subject: [ccp4bb] stereo monitor for DELL T7600
Hi All,
I am ordering a
On Linux here the ASUS Monitor with build in Emitter runs fine even on a
FX 380 Quadro without 3pin connection!
Am 01.03.13 13:17, schrieb Andrew Purkiss:
> On Fri, 2013-03-01 at 12:52 +0100, mesters wrote:
>> Why a quadro 4000? For coot, pymol, etc., a quadro 2000 is more than
>> sufficient. Even
On Fri, 2013-03-01 at 12:52 +0100, mesters wrote:
> Why a quadro 4000? For coot, pymol, etc., a quadro 2000 is more than
> sufficient. Even the quadro 600 will do fine.
Except for a linux installation, as the 3 pin bracket is only available
on the Quadro 4000 (and higher)
> I noticed that the Nv
Hi Il,
assuming that you work under Linux, be sure to get a Quadro 4000 with
a 3-pin stereo connector (this is 'optional' according to Nvidia). The
System will then work with the '3D vision System'. All compatible
monitors like AcervGD235HZ or ASUS VG236H are listed on the 3D Vision
site
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Dear Jl,
the Zalmans are probably compatible with ANY graphics card you can buy
in a shop nowadays. The technique they use was invented in the 1920s...
Best,
Tim
On 03/01/2013 12:56 AM, jlliu liu wrote:
> Hi All,
>
> I am ordering a Dell workstatio
What about the ASUS VG278HR
Activ stereo with build in emitter, 27 in.
Am 01.03.13 00:56, schrieb jlliu liu:
Hi All,
I am ordering a Dell workstation (Dell Precision,T7600n,MT,1300W) with 2GB
nVIDIA Quadro 4000. Can anyone recommend to me which stereo monitor would be
compatible with this mode
Hi All,
I am ordering a Dell workstation (Dell Precision,T7600n,MT,1300W) with 2GB
nVIDIA Quadro 4000. Can anyone recommend to me which stereo monitor would
be compatible with this model?
I have some stereo models mentioned in previously ccp4bb email:
> - Zalman ZM-M215W 21.5in
> - Zalman ZM-M2
23 matches
Mail list logo
