On Mon, May 27, 2019 at 4:14 PM shad via cctech
wrote:
>
> Hello,
> do you know the people who made the video?
> I think the factory is the Satilai in Saronno.
>
> Andrea
I believe those guys are based somewhere in the US. Sometime in the
last few months they made a trip exploring several
Hello,
do you know the people who made the video?
I think the factory is the Satilai in Saronno.
Andrea
A long shot I know, but I'm looking for an IBM knob that's missing from
a 609 calculator panel I have.
Photos can be seen here:
http://dvq.com/ibm/ibm-609-pnl1.JPG
http://dvq.com/ibm/ibm-609-pnl4.JPG
http://dvq.com/ibm/ibm-609-pnl5.JPG
I have no idea if the knob was made by IBM or was a common
On Mon, May 27, 2019 at 5:06 PM ben via cctalk wrote:
>
> On 5/27/2019 2:56 AM, Christian Corti via cctalk wrote:
> > On Mon, 27 May 2019, Rod Smallwood wrote:
> >> On an old XP box? er neither will run
> >
> > My reply was meant as a hint. You should be able to find a dd-like tool
> > for
On Mon, May 27, 2019 at 4:47 PM Steve Malikoff via cctalk
wrote:
>
> Evan said
> > While I'm on a roll, I saw this one randomly also - seems to have been a
> > topic of interest to the list not long ago?
> > It's a bit short & limited in terms of load but might suit someone
> >
> > > HPUX 8 has smit, doesn't it ?
> >
> > Do you mean "sam"?
> >
> > I thought "smit(ty)" was AIX's counterpart to HP-UX's "sam".
>
> Yes SMIT is an AIX system management utility first introduced with AIX
> for RS/6000 Ver 3, start with HPUX 10 HP did however include Logical
> Volume Manager
On 5/27/2019 2:56 AM, Christian Corti via cctalk wrote:
On Mon, 27 May 2019, Rod Smallwood wrote:
On an old XP box? er neither will run
My reply was meant as a hint. You should be able to find a dd-like tool
for Windows yourself ;-) Either by using a old version of Cygwin (there
are
Evan said
> While I'm on a roll, I saw this one randomly also - seems to have been a
> topic of interest to the list not long ago?
> It's a bit short & limited in terms of load but might suit someone
>
The Acer PC I was using to write the image to the SCSI drive has gone kaput.
Clearly PSU (not plugtop mains fuse).
Its a non standard PSU and no schematic available.
Fall back is to get one of the SLU's (other than the console) on the
KDJ11-E going and TU58 it.
Rod
--
gues just need to pop in that place in germany and take their tiles and
plop them in lol
On Mon, May 27, 2019 at 2:42 PM Jason T via cctalk
wrote:
> On Mon, May 27, 2019 at 7:32 AM Evan Linwood via cctalk
> wrote:
> > The most interesting section is from 14:14:
> >
On 5/27/19 9:58 AM, Rod Smallwood via cctalk wrote:
> Hi
>
> Whilst I wait to hear from Glen Slick who has got me this far
> (Thanks Glen) I'll restate the problem.
>
> 1. I now have an old XP system with SIMH on it (PDP11.exe)
>
> 2. I have created RD54.dsk containing RSTS/E
>
> 3.
On 5/27/19 4:56 AM, Christian Corti via cctalk wrote:
> On Mon, 27 May 2019, Rod Smallwood wrote:
>> On an old XP box? er neither will run
>
> My reply was meant as a hint. You should be able to find a dd-like tool
> for Windows yourself ;-) Either by using a old version of Cygwin (there
>
On 5/27/19 4:30 AM, Rod Smallwood via cctalk wrote:
> Hi
>
> On an old XP box? er neither will run
>
> Rod
>
>
> On 27/05/2019 08:25, Christian Corti via cctalk wrote:
>> # dd if=RD54.dsk of=/dev/sda [or whatever the device name is]
>>
>> Oh, you said Windows... I'd recommend installing
On Mon, May 27, 2019 at 7:32 AM Evan Linwood via cctalk
wrote:
> The most interesting section is from 14:14:
> https://www.youtube.com/watch?v=rrx1tK5xcAk
I like how they stole all the raised floor tiles except those with
1000lbs of tape drive on them, making extraction of those drives extra
> On 27 May 2019, at 20:18, Jason T via cctalk wrote:
>
> On Mon, May 27, 2019 at 7:32 AM Evan Linwood via cctalk
> wrote:
>> There doesn't seem to be mention of any recovery effort in the comments
>> (that I could see).
>> The most interesting section is from 14:14:
>>
On Mon, May 27, 2019 at 7:32 AM Evan Linwood via cctalk
wrote:
> There doesn't seem to be mention of any recovery effort in the comments (that
> I could see).
> The most interesting section is from 14:14:
> https://www.youtube.com/watch?v=rrx1tK5xcAk
Oof, 5:30 is a tragic sight for any IBM
On Mon, May 27, 2019 at 11:26 AM Paul Koning wrote:
>
> Looks like f$cvtime is failing, that's presumably a Y2K issue.
>
> > $ File = F$Left(Today, 2) + F$Mid(Today, 4, 2) + F$Right(Today, 7)
> > $ File = F$Left(Today, 2) + F$Mid(Today, 4, 2) + F$Right(Today, 7)
> >^
> >
> On May 27, 2019, at 2:15 PM, Glen Slick via cctalk
> wrote:
>
> On Mon, May 27, 2019 at 10:37 AM Paul Koning wrote:
>>
>>> Proceed with system startup?
>>>
>>> Beginning RSTS/E system startup...
>>> 19.05.27 09:50 Installing monitor overlays
>>> 19.05.27 09:50 Mounting
On Mon, May 27, 2019 at 10:37 AM Paul Koning wrote:
>
> > Proceed with system startup?
> >
> > Beginning RSTS/E system startup...
> > 19.05.27 09:50 Installing monitor overlays
> > 19.05.27 09:50 Mounting disks
> > 19.05.27 09:50 Assigning logical names
> > 19.05.27 09:50
On Mon, May 27, 2019 at 10:37 AM Paul Koning wrote:
>
> > RSTS V10.0-L RSTS (DU0) INIT V10.0-0L
> >
> >
> > Today's date? 19.5.27
> >
> > Current time? 9:50
> >
> > ...
> > ;9.05.27 09:50
>
> Hm, Y2K bug in that version?
>
It was installed from the RSTS/E 10.0 tape image that recently
I took a look at all the lines you mentioned. BDAL3-13, BDIN, BSYNC, and
BBS7 are all active and jump around in some manner. BRPLY is still the only
line that does not have any activity on it. None of the BDAL lines seem
shorted to ground or to each other. My DLV11-J is configured to essentially
> On May 27, 2019, at 1:23 PM, Glen Slick via cctalk
> wrote:
>
> ...
> Then boot from DU0, and if everything worked along the way it should
> just work. Assuming it boots OK into RSTS/E 10.0, use the SHOW DISK
> command to verify that the reported disk size is the expected 311200
> blocks.
On Mon, May 27, 2019 at 6:58 AM Rod Smallwood via cctalk
wrote:
>
> Hi
>
> Whilst I wait to hear from Glen Slick who has got me this far
> (Thanks Glen) I'll restate the problem.
>
> 1. I now have an old XP system with SIMH on it (PDP11.exe)
>
> 2. I have created RD54.dsk containing RSTS/E
> On May 27, 2019, at 12:14 PM, Holm Tiffe via cctalk
> wrote:
>
> Rod Smallwood via cctalk wrote:
>
>> Hi
>>
>> Whilst I wait to hear from Glen Slick who has got me this far
>> (Thanks Glen) I'll restate the problem.
>>
>> 1. I now have an old XP system with SIMH on it (PDP11.exe)
Yes SMIT is an AIX system management utility first introduced with AIX
for RS/6000 Ver 3, start with HPUX 10 HP did however include Logical
Volume Manager (LVM) which was also introduced in AIX 3.0
Paul.
On 2019-05-27 1:23 p.m., Grant Taylor via cctalk wrote:
On 5/27/19 3:05 AM, Stefan
On 5/26/19 11:25 PM, Cameron Kaiser via cctalk wrote:
Irrelevant here, because it's a BIND 4 server on the other end too
(on purpose since I have other older systems that need it). HP/UX 8
is also BIND 4.
ACK
That's an interesting idea, but I'm not sure when to do this. By the
time I
On 5/27/19 3:05 AM, Stefan Skoglund via cctalk wrote:
HPUX 8 has smit, doesn't it ?
Do you mean "sam"?
I thought "smit(ty)" was AIX's counterpart to HP-UX's "sam".
--
Grant. . . .
unix || die
On Mon, May 27, 2019 at 6:58 AM Rod Smallwood via cctalk
wrote:
>
> Hi
>
> Whilst I wait to hear from Glen Slick who has got me this far
> (Thanks Glen) I'll restate the problem.
>
> 1. I now have an old XP system with SIMH on it (PDP11.exe)
>
> 2. I have created RD54.dsk containing RSTS/E
Noel Chiappa via cctalk wrote:
> > From: Rod Smallwood
>
> > 4. I need a tried and tested list of step by step instructions to
> > put RD54.dsk on the SCSI drive.
>
> Well, this isn't a list of directions, but... I've had good luck doing
> almost this exact same thing (on a Windows
Rod Smallwood via cctalk wrote:
> Hi
>
> Whilst I wait to hear from Glen Slick who has got me this far
> (Thanks Glen) I'll restate the problem.
>
> 1. I now have an old XP system with SIMH on it (PDP11.exe)
>
> 2. I have created RD54.dsk containing RSTS/E
>
> 3. Attached to the system
> From: Rod Smallwood
> 4. I need a tried and tested list of step by step instructions to
> put RD54.dsk on the SCSI drive.
Well, this isn't a list of directions, but... I've had good luck doing
almost this exact same thing (on a Windows XP box, copy a filesystem in
Windoze file onto
Hi
Whilst I wait to hear from Glen Slick who has got me this far
(Thanks Glen) I'll restate the problem.
1. I now have an old XP system with SIMH on it (PDP11.exe)
2. I have created RD54.dsk containing RSTS/E
3. Attached to the system is a 2.1Gb SCSI drive via an adaptec 2940
I would love it if anyone on this list who maintains a wiki for PDP-11's could
collect all of the various methods and instructions. I am still far from ready
to do things like this (moving images to a PDP) but it is in my future. I could
go through all the emails in the archive on the subject
Or FLX. FLX 2.6 uses DJGPP and runs on old stuff, possibly as far back as
actual DOS and certainly should have no problem with XP. It doesn't do image
copy, though. You could steal some of the code and make an image copy tool.
Or you could use it to initialize the destination disk, copy all
While I'm on a roll, I saw this one randomly also - seems to have been a topic
of interest to the list not long ago?
It's a bit short & limited in terms of load but might suit someone
I'm guessing this could be known to others on the list, but I haven't seen it
mentioned, so posting just in case.
There doesn't seem to be mention of any recovery effort in the comments (that I
could see).
The most interesting section is from 14:14:
https://www.youtube.com/watch?v=rrx1tK5xcAk
This just came up on Fess Bouc. I did not know that it existed.
It's an LLVM-backed modern compiler for BLISS.
https://madisongh.github.io/blissc/
--
Liam Proven - Profile: https://about.me/liamproven
Email: lpro...@cix.co.uk - Google Mail/Hangouts/Plus: lpro...@gmail.com
> -Original Message-
> From: cctalk On Behalf Of Christian Corti
> via cctalk
> Sent: 27 May 2019 09:57
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: 11/93 Rebuild
>
> On Mon, 27 May 2019, Rod Smallwood wrote:
> > On an old XP box? er neither will run
>
>
I think the answer may be PUTR but I'll wait and see what Glen says ..
He's been right so far.
Rod
On 27/05/2019 09:56, Christian Corti via cctalk wrote:
On Mon, 27 May 2019, Rod Smallwood wrote:
On an old XP box? er neither will run
My reply was meant as a hint. You should be able to
sön 2019-05-26 klockan 21:09 -0700 skrev Cameron Kaiser via cctalk:
> I've been doing more work on my 9000/350 now that I have actual space
> to
> do work on it in. Although the 10b2 is flaky, I can usually coax it
> to work.
>
> However, the damn thing won't query DNS even though I have a
>
sön 2019-05-26 klockan 21:09 -0700 skrev Cameron Kaiser via cctalk:
> I've been doing more work on my 9000/350 now that I have actual space
> to
> do work on it in. Although the 10b2 is flaky, I can usually coax it
> to work.
>
HPUX 8 has smit, doesn't it ?
I did some works with HPUX almost 30
On Mon, 27 May 2019, Rod Smallwood wrote:
On an old XP box? er neither will run
My reply was meant as a hint. You should be able to find a dd-like tool
for Windows yourself ;-) Either by using a old version of Cygwin (there
are instructions how to find them), by installing a stand-alone
Same command will work from a linux live cd
> On May 27, 2019, at 9:30 AM, Rod Smallwood via cctalk
> wrote:
>
> Hi
>
> On an old XP box? er neither will run
>
> Rod
>
>
> On 27/05/2019 08:25, Christian Corti via cctalk wrote:
>> # dd if=RD54.dsk of=/dev/sda [or whatever the device
Hi
On an old XP box? er neither will run
Rod
On 27/05/2019 08:25, Christian Corti via cctalk wrote:
# dd if=RD54.dsk of=/dev/sda [or whatever the device name is]
Oh, you said Windows... I'd recommend installing Cygwin ;-)
--
On Mon, 27 May 2019, Rod Smallwood wrote:
In addition to the normal IDE drive it has an additional SCSI controller
and drive
Using SIMH I have created an image (RD54.dsk) containing a RSTS
system.
I am awaiting the final instructions as to how to copy the image to the
SCSI
Hi
Thanks to Glen Slick I now have a old windows xp system running SIMH
Its connected to my LAN so web and file access are OK
In addition to the normal IDE drive it has an additional SCSI
controller and drive
Using SIMH I have created an image (RD54.dsk) containing a
On 5/27/19 12:31 AM, Cameron Kaiser via cctalk wrote:
I'm not as adept at HP/UX before 10.20 (my first experience with the OS),
but I understand 8.0 "fails over" to /etc/hosts if it has some issues with
DNS. Fine, but how can I get it to switch *back*? There's no
/etc/nsswitch.conf and I
47 matches
Mail list logo
