> On May 1, 2023, at 6:23 PM, Brent Hilpert via cctalk
> wrote:
>
> On 2023-May-01, at 2:25 AM, Peter Coghlan via cctalk wrote:
>> It seems a bit odd that a power supply from someone like DEC of that era
>> would
>> be designed to depend so critically on the absolute value of a rail used
>>
With all due respect, Bill, this is a 3D printing mailing list question.
Sellam
On Mon, May 1, 2023 at 11:26 AM Bill Gunshannon via cctalk <
cctalk@classiccmp.org> wrote:
>
> Thanks Dennis and Gene. That did the trick.
>
> I tried to do that but it seemed all I changed was view but with your
>
On 2023-May-01, at 2:25 AM, Peter Coghlan via cctalk wrote:
> It seems a bit odd that a power supply from someone like DEC of that era would
> be designed to depend so critically on the absolute value of a rail used
> for startup purposes.
Further to Peter's point above, the 1988 NatSemi databook
Thanks Dennis and Gene. That did the trick.
I tried to do that but it seemed all I changed was view but with your
suggestions I found the right button and am printing one of the odd
pieces right now.
Finally I can have enclosures for all these boards I run just sitting on
top of
the
> On May 1, 2023, at 09:20, W2HX via cctalk wrote:
>
> Ok thanks guys. Here is a better picture of the inside cover
> https://w2hx.com/x/VintageComp/Platter-Device/insidecover.jpg
>
> I would love to find a manual to this. There are lots of extra bits stored
> inside a compartment. But I am
On Mon, 1 May 2023, Bill Gunshannon via cctalk wrote:
Are there any 3D printing experts hanging around here?? I need help.
I want to print things like a bracket to mount my FreHD in a disk bay.
Some other things, too.? The problem is the STL file wants to print these
items
vertically
> Is there any way to change the orientation of an object on the table
> using just the STL file?
Creality's slicer software is a fork of Cura.
Cura can rotate objects on the platform during the slicing process. Not
sure I've ever actually used Creality's version, but in the more generic
Are there any 3D printing experts hanging around here? I need help.
I want to print things like a bracket to mount my FreHD in a disk bay.
Some other things, too. The problem is the STL file wants to print
these items
vertically instead of laying flat on the table. Needless to say by
Ok thanks guys. Here is a better picture of the inside cover
https://w2hx.com/x/VintageComp/Platter-Device/insidecover.jpg
I would love to find a manual to this. There are lots of extra bits stored
inside a compartment. But I am not near the unit at this time.
Anyone have any idea about where
I read the request at the ns32k site and I found out via another
request, that the datasheet has been published in the Elektor Book
"IC-Datenbuch teil 3". Perhaps you find an owner of that book.
Marten
> On Apr 30, 2023, at 10:27 PM, Ethan Dicks via cctalk
> wrote:
>
> On Sun, Apr 30, 2023 at 8:47 PM W2HX via cctalk wrote:
>> Can anyone tell me what I picked up at a NH hamfest this weekend for $20? I
>> see it says RL01/RL02. I have two RL02 drives and some platters. None of
>> which I
Out of stock in the manufacturer, I am on the waiting list for one, it is
used on my crystal ball.
Enviado do meu Tele-Movel
Em dom., 30 de abr. de 2023 23:36, Sellam Abraham via cctalk <
cctalk@classiccmp.org> escreveu:
> It looks like a Turbo encabulator but it's missing the flux capacitor.
>
It seems a bit odd that a power supply from someone like DEC of that era would
be designed to depend so critically on the absolute value of a rail used
for startup purposes.
The output of the replacement 7812 varying between 12.2V and 12.4V suggest that
the 7812 itself could be faulty. Or
I have at least 5 in my stock. I could easily part with one or two. I would
rather trade rather than get cash. Do you have anything to offer in trade?
-Gary
I need to order higher tolerance ones. However, I was wondering, would a
sensible strategy be to go through the ones that I have and find one that
outputs a voltage closer to the spec? Or would that just be storing up trouble
for the future?
Regards
Rob
> -Original Message-
> From:
15 matches
Mail list logo