I can't add attachments here. I emailed them to your direct email address.
Bob
On 11/17/2023 3:11 AM, Rod Smallwood via cctalk wrote:
Hi Bob
The attachment seems to be missing.
Rod
Also I hae some more boards available
M7856 X 2
M863 X 2
M837 X 2
M8650
M8320
M880 + H241 (MR8
Try printing them in PETG: I've printed several of them for my 8/L and
they equal the strength of factory switches. Even the little pins are
more than strong enough.
PETG does require a higher printing temperature (220c-230c) but is well
worth it and a massive improvement over PLA.
Chris
I have tired to print the paddle handles both SLA and FDM and none match
the quality and strength of injected molded paddles.
Unless you print an entire set (light and dark colors) it is nearly
impossible to match the colors also. Even if you were to find the
perfect filament or resin color,
Hi Bob
The attachment seems to be missing.
Rod
Also I hae some more boards available
M7856 X 2
M863 X 2
M837 X 2
M8650
M8320
M880 + H241 (MR8 EC)
M849
M3310
On 16/11/2023 20:53, Bob Rosenbloom via cctalk wrote:
Do you have any more of the DEC PDP-8 e/m/f front panels?
I'm
OK, a faux descriptor would work round the documented checks which are on block
number rather than EA - there is a hardware overide
I'm delighted to hear that RSTS won't play along and set up for EA overflow
Martin
-Original Message-
From: Paul Koning [mailto:paulkon...@comcast.net]
Ok, but I think that's not what I meant.
Suppose I have APR6 = 17 and length > 1. That means VA 140076 maps to
physical address 1776, and VA 140100 maps to physical addres 2000 which
when masked with 22 bits would end up at 0. The offset within the page is <=
the page length.
EK-DCJ11-UG-Pre DCJ11 Microprocessor User's Guide says it will abort [the first
processor guide on the shelf]
$4.5.2.2 (p4-7) Page Length Field ... "The block number of the virtual address
is compared against the page length field to detect length errors" ...
$4.7.1 MMR0 <14> Abort Page Length
I'm working on some code where it would be handy to map the top of the I/O page
along with the bottom of physical memory. An obvious hack is to point the APR
to the I/O page address needed, then set the length so that the address modulo
2^22 also covers the low memory range.
It seems from the
On 11/16/2023 12:53 PM, Bob Rosenbloom via cctalk wrote:
Do you have any more of the DEC PDP-8 e/m/f front panels?
I'm looking for one that matches the layout attached. I don't care
what model (e/m/f etc.) it's for, but the rotary switch layout needs
to be right and I prefer the matte finish.
I had some toggles printed for me professionally, but they are inferior to
the originals and the colours don't match.
If anyone has spare DEC LAB-8/e switches please let me know.
Thanks
Tom
On Fri, Nov 17, 2023, 10:14 PM Bill Gunshannon via cctalk <
cctalk@classiccmp.org> wrote:
>
>
> On
On 11/17/2023 8:52 AM, Tom Hunter via cctalk wrote:
Hi Bob,
I can't help with your search for 8/e front panels, but you mentioned
"green switch boards". I have a nicely restored DEC LAB-8/e with green
switch toggles. Do you have spare green switch toggles? I would love to
have one dark green
Hi Bob,
I can't help with your search for 8/e front panels, but you mentioned
"green switch boards". I have a nicely restored DEC LAB-8/e with green
switch toggles. Do you have spare green switch toggles? I would love to
have one dark green and one light green toggle. I don't need the actual
Hi Dave,
Did this go? If not, I'd be interested. I'm located in Hebden Bridge, so
could drive over to collect.
Best,
Andrew
On 16/11/2023 10:24, Dave Wade G4UGM via cctalk wrote:
> Folks,
>
>
>
> Trying to reduce the weight in my loft and I would like to donate my HP
> Photoplotter to a good
13 matches
Mail list logo
