Kyle, I have not run my machine since March. Summer is car season. But I
thought that maybe I could run this little program quickly. My PDP8E started
up, loaded the RIM and SERIAL DISK then OS/8 ran. Everything looked good,
BUT.. something is wrong with my FORTRAN 4. Programs seem to
Kyle, my Friden is a Model SFD-V, although yours looks similar, apparently it
is different. You will find that a lot of the old lube has combined with dust
and dirt to make gummy grime. This sticky stuff will cause the relays and lever
arms to stick and act sluggishly. I have found that a strip
Paul I talked to you about a M8650 serial board for a PDP8E. We talked on the
telephone one evening and you mentioned that if I had not heard anything in a
week or 2 I should remind you. Thanks
Mike Zahorik (414) 254-6768
From: Paul Anderson via cctalk
To:
Paul, I'm looking for dec m8650 for a PDP8E.
Mike Zahorik (414) 254-6768
From: Paul Anderson via cctalk
To: General Discussion: On-Topic and Off-Topic Posts ;
cct...@vax-11.org
Sent: Friday, February 16, 2018 3:40 AM
Subject: DEC
Thanks, that information should be enough to get going. I may want a different
lay out so that it will fit on some metal shelving I have.
Mike Zahorik (414) 254-6768
From: Noel Chiappa via cctalk
To: cctalk@classiccmp.org
Cc: j...@mercury.lcs.mit.edu
Sent:
Thanks for responding. Makes sense. I do like your wood working. I may give it
a try. Should not be very difficult.
Mike Zahorik (414) 254-6768
From: Noel Chiappa via cctalk
To: cctalk@classiccmp.org
Cc: j...@mercury.lcs.mit.edu
Sent: Sunday, December 31, 2017
Noel, I recently I picked up a dozen or so spare boards for my PDP8E. I was
wondering about how to store them. Some guys recommend some poly bags, others
say it is important to protect against humidity. You sure have a boat load of
cards, have you had any failures while in storage? Thanks
Mike
My homemade 8080 CPM machine used a number of 2708 and 2716 EPROMs. that was 40
years ago. This machine is still running and I use it, but since I had trouble
with the EPROMs, I switched to EEPROMs. I would also be interested in hearing
about whether or not baking would work and how to do the