> From: Pontus Pihlgren
> Thank you for sharing Noel.
Well, I thought people might find it useful. Over time,I've made a variety of
shelf designs to hold my boards, searching for something that worked really
well, and I liked this one so much I thought it was worth passing it on.
In fact
On Mon, Jan 01, 2018 at 01:58:57PM -0500, Noel Chiappa via cctalk wrote:
>
> No, as long as you have either a radial arm saw (best), or a table saw
> (preferably with a 'sled' - if you don't have one, probably worth making one)
> to cut all the slots.
>
> Like I said, if you want a drawing, let m
:59 PM
Subject: Re: DEC quad board rack
> From: Michael Zahorik
> Thanks for responding.
Sure. Not sure how much use it was, but...
> I do like your wood working.
Thanks..
> may give it a try. Should not be very difficult.
No, as long as you have either a ra
> From: Michael Zahorik
> Thanks for responding.
Sure. Not sure how much use it was, but...
> I do like your wood working.
Thanks..
> may give it a try. Should not be very difficult.
No, as long as you have either a radial arm saw (best), or a table saw
(preferably with a 'sl
That's pretty neat. Nicely done.
Marc
On Dec 31, 2017, at 6:32 AM, Noel Chiappa via cctalk
wrote:
So, I've been making wooden racks to hold a lot of my DEC boards, and I've
finally come up with a nice design for one, which holds quad boards:
http://ana-3.lcs.mit.edu/~jnc/tech/jpg/QuadRack.jpg
: DEC quad board rack
> From: Michael Zahorik
> a dozen or so spare boards for my PDP8E. I was wondering about how to
> store them. Some guys recommend some poly bags, others say it is
> important to protect against humidity. ... have you had any failures
> w
> From: Michael Zahorik
> a dozen or so spare boards for my PDP8E. I was wondering about how to
> store them. Some guys recommend some poly bags, others say it is
> important to protect against humidity. ... have you had any failures
> while in storage?
Well, i) most of my boa
Zahorik
From: Noel Chiappa via cctalk
To: cctalk@classiccmp.org
Cc: j...@mercury.lcs.mit.edu
Sent: Sunday, December 31, 2017 8:32 AM
Subject: DEC quad board rack
So, I've been making wooden racks to hold a lot of my DEC boards, and I've
finally come up with a nice desi
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Noel
> Chiappa via cctalk
> Sent: 31 December 2017 14:32
> To: cctalk@classiccmp.org
> Cc: j...@mercury.lcs.mit.edu
> Subject: DEC quad board rack
>
> So, I've been maki
On 2017-12-31 07:32, Noel Chiappa via cctalk wrote:
So, I've been making wooden racks to hold a lot of my DEC boards, and I've
finally come up with a nice design for one, which holds quad boards:
http://ana-3.lcs.mit.edu/~jnc/tech/jpg/QuadRack.jpg
which holds them vertically.
Nice!
However
So, I've been making wooden racks to hold a lot of my DEC boards, and I've
finally come up with a nice design for one, which holds quad boards:
http://ana-3.lcs.mit.edu/~jnc/tech/jpg/QuadRack.jpg
which holds them vertically.
It's much better than the dual rack next to it, which holds them
hori
11 matches
Mail list logo