Hi Bill,
>
> From: cctalk [cctalk-boun...@classiccmp.org] on behalf of Mark G Thomas via
> cctalk [cctalk@classiccmp.org]
> Subject: KDJ11-B PDP 11/73 getting stuck in Exit standalone mode diag #56
>
> Hi,
>
> I picked up an
From: cctalk [cctalk-boun...@classiccmp.org] on behalf of Mark G Thomas via
cctalk [cctalk@classiccmp.org]
Sent: Sunday, April 2, 2017 2:49 PM
To: cct...@classiccmp.org
Subject: KDJ11-B PDP 11/73 getting stuck in Exit standalone mode diag #56
Hi,
I
] on behalf of Noel Chiappa via
cctalk [cctalk@classiccmp.org]
Sent: Tuesday, April 4, 2017 6:35 PM
To: cctalk@classiccmp.org
Cc: j...@mercury.lcs.mit.edu
Subject: Re: KDJ11-B PDP 11/73 getting stuck in Exit standalone mode diag #56
> From: Glen Slick
> the Q22/Q22 backplane is no
> From: Glen Slick
> the Q22/Q22 backplane is not good for an 11/83 CPU ... M8190 boards and
> both have PMI signals on the CD half of the CPU board.
So I seem to recall hearing tales of PMI cards emitting smoke when plugged
into a Q/Q/ backplane. That doesn't seem to have happened
On Sun, Apr 2, 2017 at 11:49 AM, Mark G Thomas via cctalk
wrote:
>
> Unfortunately, I discovered slots are all wired Q22/Q22, no top ABCD
> (Q22/CD) PMI slots like a BA23. So, not good for an 11/83 CPU wired
> for PMI on slots C-D.
>
> So, I was hoping I could get my
Hi,
I picked up an empty 4x8 Q-bus chassis at VCF-East this year. It's
labelled "USDC CSS-823 Processor System" on the outside. It's not a DEC
backplane, but the chassis is light aluminum, smaller and in some ways
nicer than my pile of BA23s. It includes a switching power supply,
LTC and