> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of William
> Maddox
> Sent: 10 September 2016 02:41
> To: General Discussion: On-Topic and Off-Topic Posts ;
> r...@jarratt.me.uk
> Subject: Re: Logic Analyser Advice
>
> On
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of
> m...@markesystems.com
> Sent: 13 September 2016 05:33
> To: cctalk@classiccmp.org
> Subject: Re: Logic Analyser Advice
>
> > I finally managed to pick up a logic analyser
On Mon, Sep 12, 2016 at 09:33:01PM -0700, m...@markesystems.com wrote:
> HP 1630G Logic Analyzer: $10
> Complete set of probes: $500
Too true to be truly funny.
mcl
I finally managed to pick up a logic analyser for a price I could justify.
It is a HP1630G and it comes with a number of pods. However the pods do
not
seem to have the actual wires/probes. Is there a separate part number for
these that I should look for. There seem to be quite a few items like
On 9/10/2016 3:34 AM, Rob Jarratt wrote:
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Noel Chiappa
Sent: 10 September 2016 02:54
To: cctalk@classiccmp.org
Cc: j...@mercury.lcs.mit.edu
Subject: Re: Logic Analyser Advice
The key for me was to find
On Sat, Sep 10, 2016 at 12:23 PM, Ian S. King wrote:
> On Sat, Sep 10, 2016 at 1:27 AM, Rob Jarratt
> wrote:
>
>> I will buy a set and see how it goes. I also believe there are some probes
>> that are designed to clip over a whole IC, any recommendations for those? I
>> did try using one once but
On Sat, Sep 10, 2016 at 1:27 AM, Rob Jarratt
wrote:
>
>
> I will buy a set and see how it goes. I also believe there are some probes
> that are designed to clip over a whole IC, any recommendations for those? I
> did try using one once but it was designed to be used in conjunction with
> grabber
On 09/10/2016 03:34 AM, Rob Jarratt wrote:
I went the Tek route. I had a 1240 for a long time, and
then upgraded to a 9200 with 3 92A96 acq cards.
Quite a beast, with 288 channels at 10 ns. They have
transmission line cables to the pods, but the pods are
passive, I think a parallel 82K resis
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Noel
> Chiappa
> Sent: 10 September 2016 02:54
> To: cctalk@classiccmp.org
> Cc: j...@mercury.lcs.mit.edu
> Subject: Re: Logic Analyser Advice
>
> > From: Ian S. K
> -Original Message-
> From: tony duell [mailto:a...@p850ug1.demon.co.uk]
> Sent: 10 September 2016 06:02
> To: r...@jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
>
> Subject: RE: Logic Analyser Advice
>
>
> I have an HP1630 of some flav
> I finally managed to pick up a logic analyser for a price I could justify.
> It is a HP1630G and it comes with a number of pods. However the pods do not
I have an HP1630 of some flavour and find it very useful. AFAIK it was the last
series of logic analysers from HP to have proper service manua
I did that research regarding the HPs, without as much success as you
obviously enjoyed. Tek and HP are really different beasts, in my
experience.
On Fri, Sep 9, 2016 at 6:54 PM, Noel Chiappa
wrote:
> > From: Ian S. King
>
> > Do you have the grey rectangular bits that plug into the pod
> From: Ian S. King
> Do you have the grey rectangular bits that plug into the pods? If not,
> you're pretty much screwed
Not necessarily. I bought a couple of Tek 1240's, without pods or probes, but
managed to locate a goodly supply of each on eBait.
The key for me was to find the o
-Bill
From: Ian S. King
To: r...@jarratt.me.uk; General Discussion: On-Topic and Off-Topic Posts
Sent: Friday, September 9, 2016 6:04 PM
Subject: Re: Logic Analyser Advice
Do you have the grey rectangular bits that plug into the pods? If not,
you're pretty much screwed - they ar
Do you have the grey rectangular bits that plug into the pods? If not,
you're pretty much screwed - they are (were) a proprietary part.
I have a 1630G and I really like it, but I held out until I could find one
with the bits that plug into the pods, since they are unobtainium.
On Fri, Sep 9, 201
15 matches
Mail list logo