On 2021-04-20 17:14, Richard Cini wrote:
If you can hear the eject motor, you may want to inspect the eject
gear. I know I’ve had to replace them on both of my //gs drives.
They’re 3D printed and I think I found them on eBay or one of the 3D
services. I forget. I do remember it was $15 for 2.
On 2021-04-21 08:35, Tapley, Mark B. via cctalk wrote:
I have forgotten, is this the same drive type where the lubrication
eventually turns gummy and needs to be cleaned off and replaced by
something with the original, relatively low viscosity? I recall that
being an issue with some 3.5”
> On Apr 20, 2021, at 5:14 PM, Richard Cini via cctalk
> wrote:
>
> [EXTERNAL EMAIL]
>
> If you can hear the eject motor, you may want to inspect the eject gear. I
> know I’ve had to replace them on both of my //gs drives. They’re 3D printed
> and I think I found them on eBay or one of the
If you can hear the eject motor, you may want to inspect the eject gear. I know
I’ve had to replace them on both of my //gs drives. They’re 3D printed and I
think I found them on eBay or one of the 3D services. I forget. I do remember
it was $15 for 2.
http://cini.classiccmp.org/
Long Island