On 22.09.21 13:46, Jules Richardson via cctalk wrote:
On 9/20/21 1:13 AM, Chris Zach via cctalk wrote:
Running it through the MFM tool got all but 200 or so sectors on the first
pass, most errors were on head 3 but tapered off after cyl 500. Seems like a
normal copy of Accent, no special
Hopefully a few of the DEC/VMS fans here might be able to help!
I'm on a bit of a quest. I've been given some old VAX/VMS software -- a
cross compiler and some source code -- that I'd like to get running. My
goal is to get the source code building and experiment with the compiler
a bit.
> Does anyone have a (set of) ROM image(s) for the VAXstation 100?
> It might be interesting to attempt an emulator.
I think the machine has some historical interest. Barbara Liskov's CLU
group received a number of VS100 terminals for their VAX. This prompted
Bob Scheifler to create X. CLU
On 9/20/21 1:13 AM, Chris Zach via cctalk wrote:
Running it through the MFM tool got all but 200 or so sectors on the first
pass, most errors were on head 3 but tapered off after cyl 500. Seems like
a normal copy of Accent, no special information so it might not be worth
taking the world apart
..the compatible Device for the Labtool-48 is the Dataman-48, Software
is here: https://www.dataman.com/dataman-4848lv-resources
Regards,
Holm
- Forwarded message from Holm Tiffe -
Date: Wed, 22 Sep 2021 07:45:32 +0200
From: Holm Tiffe
To: Jonathan Stone
Subject: Re: Burnable,
On Wed, 22 Sept 2021 at 00:01, Jecel Assumpcao Jr via cctalk
wrote:
> The TI people were selling their chip as a simple four operation
> calculator. Here is what the Sinclair people did with it:
>
> http://files.righto.com/calculator/sinclair_scientific_simulator.html
And that's where the
On Wed, 22 Sept 2021 at 14:21, Philip Pemberton via cctalk
wrote:
> I'm thinking of using SIMH, unless there's a better emulator available.
I like VMS but I can't claim much expertise, unfortunately.
I have sysadminned a few boxes, but never brought one up from scratch.
However I did
Hi Phil
I'm not sure if it helps, but I documented installing OpenVMS on a
Raspberry Pi a while ago at
https://blog.poggs.com/2020/04/21/openvms-on-a-raspberry-pi/
Peter
On Wed, 22 Sept 2021 at 13:21, Philip Pemberton via cctalk <
cctalk@classiccmp.org> wrote:
> Hopefully a few of the
Find a working vms system and back up the drives to your
externally-attached drive (s) to clone them. Migrate the cloned drives to
your system. This is a simplified statement of what's really involved but
if you can get to a similar system to your dec whatever you have, I'd
attempt the clone
On 22/09/2021 13:21, Philip Pemberton via cctalk wrote:
Hopefully a few of the DEC/VMS fans here might be able to help!
I'm on a bit of a quest. I've been given some old VAX/VMS software --
a cross compiler and some source code -- that I'd like to get running.
My goal is to get the source
> -Original Message-
> From: cctalk On Behalf Of Philip
> Pemberton via cctalk
> Sent: 22 September 2021 13:22
> To: cctalk@classiccmp.org
> Subject: Setting up a VMS system
>
> Hopefully a few of the DEC/VMS fans here might be able to help!
>
> I'm on a bit of a quest. I've been given
Hello,
The person that refered me to my present job at a datacenter passed away
this past monday. He was a hardware / software engineer for modcomp
computers. He left me all of the computers and documents. there are too
many books to keep, stuff concerning the modcomp computers that is not
saved
Thank you all for the information. I would like to preserve the information
and get the books to good homes if possible. I will get a listing of what
is here. If the others that have modcomp books and docs can list what they
have scanned and availible, that can save on a duplication of effort
On 9/22/21 1:51 PM, Christian Corti via cctalk wrote:
Hasn't worked for me in the past ...
guess I picked a bad day to stop sniffing glue
On 22/09/2021 17:05, Zane Healy wrote:
Interesting, I have 3 34GB drives in my cluster, and haven’t had any issue.
I think I was running OpenVMS VAX V7.2 on SIMH. IIRC it was fixed in
V7.3 (someone sent me the DECUS Hobbyist V7.3 release and that was OK).
Antonio
--
Antonio Carlini
On Sep 22, 2021, at 11:21 AM, Antonio Carlini wrote:
> On 22/09/2021 17:05, Zane Healy wrote:
>>
>> Interesting, I have 3 34GB drives in my cluster, and haven’t had any issue.
>
>
> I think I was running OpenVMS VAX V7.2 on SIMH. IIRC it was fixed in V7.3
> (someone sent me the DECUS Hobbyist
> On Sep 22, 2021, at 14:05, devin davison via cctalk
> wrote:
>
> Hello,
>
> The person that refered me to my present job at a datacenter passed away
> this past monday. He was a hardware / software engineer for modcomp
> computers. He left me all of the computers and documents. there are
AFAIK, I have an entire library of MODCOMP documentation - consisting of over
one thousand manuals as PDF's. I will check with the person who had the
original manuals scanned and check to see if it is O.K. to zip them up and give
them to AL to post on bitsavers. (I expect them to say "O.K.").
On Fri, 17 Sep 2021, devin davison wrote:
I'm working to get my pdp 11/34 and 11/45 running. I was curious what
versions of unix or bsd would work on the machines i have. I wanted to set
I'm running 2.9BSD on both our 11/34 and 11/45.
If possible too, id like to be able to telnet in to unix
Where are you located? We have a small amount of Modcomp docs here and
could take on a box more of the most useful paper docs for posterity-sake,
to round out what's already here.
Thanks
Bill Degnan
kennettclassic.com
Kennett Square, PA
On Wed, Sep 22, 2021 at 3:05 PM devin davison via cctalk <
On Wed, 22 Sep 2021, Jay Jaeger wrote:
B/W, CCITT Group 4 tiffs at 400dpi is what I do, but then I also
600 DPI should be the absolute mininum today. There is absolutely no
reason to go below that for B/W.
and notify Al Kossow of an available contribution.
Hasn't worked for me in the
On 9/22/21 1:51 PM, Christian Corti via cctalk wrote:
Bitsavers will post process and create a searchable PDF
Since when?
I think I'll just step away from the terminal for a few hours.
I've been OCRing uploads for YEARS.
On Sep 22, 2021, at 5:21 AM, Philip Pemberton via cctalk
wrote:
>
> Hopefully a few of the DEC/VMS fans here might be able to help!
>
> I'm on a bit of a quest. I've been given some old VAX/VMS software -- a cross
> compiler and some source code -- that I'd like to get running. My goal is to
On Sep 22, 2021, at 6:05 AM, Antonio Carlini via cctalk
wrote:
> Might be faster to install on a speedy machine though (I've never tried on
> any Pi but I doubt that any of them will match a Ryzen …)
I tend to use VM’s on my VMware cluster. I’ve used an RPI 3b+, it was about
1.6 VUPS, so
On 9/22/21 8:44 AM, Liam Proven via cctalk wrote:
On Wed, 22 Sept 2021 at 14:21, Philip Pemberton via cctalk
wrote:
I'm thinking of using SIMH, unless there's a better emulator available.
I like VMS but I can't claim much expertise, unfortunately.
I have sysadminned a few boxes, but never
On Sep 22, 2021, at 9:28 AM, Bill Gunshannon via cctalk
wrote:
>
> Not true. HP still owns it. VSI is licensed to continue development, nothing
> more. HPE no longer cares about VMS and the Hobbyist Program
> has ended. VSI has a Hobbyist type program but it does not cover VAX.
>
>>
On Wed, 22 Sep 2021, devin davison via cctalk wrote:
I have picked up storage containers for all the books, and i can scan it
all. after that, its all probally going in the recycle bin, as i dont know
where or how i would keep such a large pile of paper manuals on hand.
what is the prefered
On Wed, 22 Sep 2021, Christian Corti via cctalk wrote:
On Wed, 22 Sep 2021, Jay Jaeger wrote:
B/W, CCITT Group 4 tiffs at 400dpi is what I do, but then I also
600 DPI should be the absolute mininum today. There is absolutely no reason
to go below that for B/W.
Agreed.
Bitsavers will
On Wed, 22 Sept 2021 at 18:28, Bill Gunshannon via cctalk
wrote:
>
> Not true. HP still owns it. VSI is licensed to continue development,
> nothing more. HPE no longer cares about VMS and the Hobbyist Program
> has ended. VSI has a Hobbyist type program but it does not cover VAX.
I sit
I now have a 4-plane color graphics card for my VAXstation 2000, and I'd like
to actually connect it to a display.
Does anyone have a DEC BC19S cable that needs a good home? For reference, this
has a DA15F connector on one end that plugs into the VAXstation, which leads to
a box that screws
On 2021-09-13 9:21 p.m., Larkin Nickle via cctalk wrote:
Hey all,
According to
http://bitsavers.trailing-edge.com/pdf/hp/9000_200/9000-200_periphSupp_Dec89.pdf
(see PDF page 2), it seems as if HP-UX 5.1 should work on the
9000/217. http://hparchive.com/Catalogs/HP-Catalog-1986.pdf also
31 matches
Mail list logo
