That actually seems not too bad. If I needed another big project I'd have
really thought about bidding it up.
Thanks,
Jonathan
On Fri, Jan 19, 2018 at 3:54 PM, Kyle Owen via cctalk wrote:
> A tenth the price of the Twiggy Lisa makes that auction look almost
> affordable! Final price was $5600.
A tenth the price of the Twiggy Lisa makes that auction look almost
affordable! Final price was $5600.
Kyle
Cool, can you send a picture of that BYT-8 front panel?
=]
--
Anders Nelson
+1 (517) 775-6129
www.erogear.com
On Fri, Jan 19, 2018 at 4:31 AM, Sellam Ismail via cctalk <
cctalk@classiccmp.org> wrote:
> Hello again, Folks!
>
> I've listed yet another batch of S-100 goodies:
>
> http://www.vcfe
Hi,
On Thu, Jan 18, 2018 at 08:26:45PM -0600, Jason T via cctalk wrote:
> On Thu, Jan 18, 2018 at 7:55 PM, Richard Cini wrote:
> > I use this card as a floppy/disk controller in a PC/AT that's used solely
> > for imaging. The controller is connected to two Seagate ST-2502N (442MB)
> > hard driv
On 01/19/2018 01:25 AM, Christian Corti via cctalk wrote:
Why do you want to convert between the two frame types? They can happily
coexist on the same segment. In fact I'm using this setup on some Linux
servers that provide both ordinary IP services (like NFS) and Novell
shares (using Mars NWE)
I'm sure they're out there in bitsavers, but I have an original copy of the
GT-40 engineering drawings. Sometimes it's nice to have the printed copy
to work from.
Bill
On Fri, Jan 19, 2018 at 8:05 AM, Philipp Hachtmann via cctalk <
cctalk@classiccmp.org> wrote:
>
> On 12.01.2018 23:24, Al Kossow
I often have a 1522A in my disk imaging machine. Linux supports it, which
means I can use `ddrescue` with it. It'll also talk to a lot of
older/slower drives that my 2940UW doesn't like (e.g. very old DEC drives
from VAXen, it does better with some old tape drives than the 2940UW). It's
slow, but I
On 12.01.2018 23:24, Al Kossow via cctalk wrote:
this is going to go for an insane amt of money
Oh, yess! I am beginning to feel rich :-P
On 1/18/2018 5:44 PM, Jason T via cctalk wrote:
On Thu, Jan 18, 2018 at 6:58 PM, Adrian Graham via cctalk
wrote:
I could, but I guess by the time I’ve sourced a replacement I might as well
have bought an AHA-1522A instead, I have a couple of scouts out looking for
them as we speak :) The 15
On 1/19/2018 12:08 AM, TeoZ via cctalk wrote:
Didn’t early SUN gear have SCSI floppy drives?
There is a SCSI floppy drive branded with Tadpole, I think.
thanks
Jim
-Original Message- From: Fred Cisin via cctalk
Sent: Thursday, January 18, 2018 9:18 PM
To: General Discussion: On-Topic
Hello again, Folks!
I've listed yet another batch of S-100 goodies:
http://www.vcfed.org/forum/showthread.php?61192-Sellam-s-S-100-Hardware-Software-and-Peripherals-Sales-Thread&p=495275#post495275
The latest batch includes a new Processor Technology kit, a BYT-8 front
panel, a Commodore PET to
Christian Corti via cctalk wrote:
> On Fri, 19 Jan 2018, TeoZ wrote:
> > Didn?t early SUN gear have SCSI floppy drives?
>
> No, SUN always used standard floppy controllers. But HP and DEC used them,
> although it was not very common. The floppy drives are standard TEAC
> FD-235HF with an additi
On Fri, 19 Jan 2018, TeoZ wrote:
Didn?t early SUN gear have SCSI floppy drives?
No, SUN always used standard floppy controllers. But HP and DEC used them,
although it was not very common. The floppy drives are standard TEAC
FD-235HF with an additional SCSI floppy controller board.
Christian
On Thu, 18 Jan 2018, Chuck Guzis wrote:
I've had some decent results with P4 and Socket 939 motherboards but
after that, not so much. I don't know if that's a bright-line rule, but
it seems to hold with my gear.
My quite current Socket AM3+ board with six-core CPU and 16GB of RAM (to
be preci
On Thu, 18 Jan 2018, Grant Taylor wrote:
I'm wondering if it might be possible to use an old NetWare 4.x / 5.x box as
a router to convert from one Ethernet frame type to another Ethernet frame
type. I.e. from IP over Ethernet II frames to IP over 802.3 frames.
Why do you want to convert betwe
Didn’t early SUN gear have SCSI floppy drives?
-Original Message-
From: Fred Cisin via cctalk
Sent: Thursday, January 18, 2018 9:18 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Adaptec 1522A SCSI Support (was re: New TestFDC Results
Registry)
On Thu, 18 Jan 20
16 matches
Mail list logo