Thank you for all the answers.
It seems that waiting a day or so solved the problem, and now ssh doesn't
ask for tweenex password and act like a pass thru, as documented.
One explanation why we see 2 adresses might be because the first one is the
proxy/pass thru server, and the second one the
Donald said
> I assume you have a standard search set up on eBay? That is where I got mine.
>
I've had an eBay search on looking for a /40 TROS mylar sheet for years, but so
far
have not lucked onto any (by comparison /50 BCROS seems to be much more common).
Still looking, if anyone had a
in case anyone is interested...Actually the coupler does communicate with the
GX007 but only optionally. The serial control simply loops through from the
coupler to the GX unit and right to a serial terminal (my understanding from
various docs I have gathered on the subject). The TX/RX lines
On 08/10/2018 01:47 PM, Eric Smith wrote:
On Thu, Aug 9, 2018 at 8:26 PM, Bill Gunshannon via cctalk
mailto:cctalk@classiccmp.org>> wrote:
On 08/09/2018 09:39 PM, W2HX via cctalk wrote:
> Hello friends. I need a translation from a German manual describing serial
> port parameters. I used
Colex US was based in Redwood City. I got a bunch of their VME systems cheap
when they
shut down in 1985 that we used for development at AED.
I think they were based in Taiwan
On 8/10/18 9:50 AM, jos via cctalk wrote:
> No, it is just a 8MHz MC68K, 2 PALs to somehow kludge the 68K to the STD
On Thu, Aug 9, 2018 at 8:26 PM, Bill Gunshannon via cctalk <
cctalk@classiccmp.org> wrote:
> On 08/09/2018 09:39 PM, W2HX via cctalk wrote:
> > Hello friends. I need a translation from a German manual describing
> serial port parameters. I used google translate but it doesn't quite give
> me the
On 10.08.2018 16:37, Al Kossow via cctalk wrote:
funky..
I have the code for the VME version that used an 80186 running DOS for an I/O
processor
Been watching for another one for 30 years, since I never dumped the firmware
from the 186.
Does the 68K card have a 68451 on it?
No, it is
Probably irrelevant here but there were several versions of UNIX for S100
Cromemco Systems using a 68010 or 68020; FWIW, memory management was done on a
separate card.
They also had Cromix, a UNIX look-alike, for both Z80 and 68000 systems.
m
- Original Message -
From: "Al Kossow via
> On Aug 10, 2018, at 10:14 AM, Warner Losh via cctalk
> wrote:
>
> On Fri, Aug 10, 2018 at 6:09 AM, Peter Corlett via cctalk <
> cctalk@classiccmp.org> wrote:
>
>> On Fri, Aug 10, 2018 at 02:14:54AM +0200, Stéphane Tsacas via cctalk wrote:
>>> Did anyone manage to connect to tweenex,org
funky..
I have the code for the VME version that used an 80186 running DOS for an I/O
processor
Been watching for another one for 30 years, since I never dumped the firmware
from the 186.
Does the 68K card have a 68451 on it?
On 8/10/18 5:36 AM, jos via cctalk wrote:
>
> Unlikely, I know,
Did the freighter come with it or do you have to buy your own
to use it? :-)
bill
On 08/10/2018 10:13 AM, W2HX via cctalk wrote:
> thanks everyone!
>
> From: Paul Koning
> Sent: Friday, August 10, 2018 9:22 AM
> To: W2HX; General Discussion:
I assume you have a standard search set up on eBay? That is where I got mine.
On Fri, Aug 10, 2018 at 6:09 AM, Peter Corlett via cctalk <
cctalk@classiccmp.org> wrote:
> On Fri, Aug 10, 2018 at 02:14:54AM +0200, Stéphane Tsacas via cctalk wrote:
> > Did anyone manage to connect to tweenex,org through ssh now that telnet
> > port is closed ?
> > I received an mail that says
thanks everyone!
From: Paul Koning
Sent: Friday, August 10, 2018 9:22 AM
To: W2HX; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: German Translation, Serial Port?
> On Aug 9, 2018, at 9:39 PM, W2HX via cctalk wrote:
>
> Hello friends. I
> On Aug 9, 2018, at 9:39 PM, W2HX via cctalk wrote:
>
> Hello friends. I need a translation from a German manual describing serial
> port parameters. I used google translate but it doesn't quite give me the
> warm and fuzzy. Anyone here speak German? Here is what it says:
>
>
On Fri, 10 Aug 2018, John Many Jars via cctalk wrote:
I'm sure it's been years since I've darkened anyone's door around here.
I still have this idea that someone should write a proper BBS system (and
run it) for RSTS...
...the age old problem is getting data in and out of it to connect it to
I'm sure it's been years since I've darkened anyone's door around here.
I still have this idea that someone should write a proper BBS system (and
run it) for RSTS...
...the age old problem is getting data in and out of it to connect it to
the world... or one of the problems anyhow. Maybe using
Unlikely, I know, but i am looking for Unisoft UNIX fo a COLEX system
I have a Colex 850 CP/M system, with a lose STD-68000 card and some more memory
cards.
This should support the Unisoft UNIX that once was available for this system.
Anyone has a copy of this Unisoft version ?
Jos
On Fri, Aug 10, 2018 at 02:14:54AM +0200, Stéphane Tsacas via cctalk wrote:
> Did anyone manage to connect to tweenex,org through ssh now that telnet
> port is closed ?
> I received an mail that says :
> TELNET access to twenex.org has been changed to only support SSH via the
> SSH passthru user
19 matches
Mail list logo
