Looking to trade for Emulex UC04 QBus SCSI

Hi all -- In my quest to get my MicroVAX I to do something interesting, I'm looking for an Emulex UC04 SCSI controller -- this is one of the few MSCP SCSI devices that I'm aware of that are compatible with the MicroVAX I (the rest all require a II or later). I have a nice CMD CQD-200/TM QBus SCSI

Re: CPT boards

On 10/06/2018 06:42 PM, Adrian Graham via cctalk wrote: I’ve talked to a few CPT employees over the years, see http://binarydinosaurs.co.uk/museum/cpt/ - if your haul is related to the 4200 I’ll need to add the pics too :) Sure thing! I've set the boar

Re: CPT boards

> On 7 Oct 2018, at 00:35, Jules Richardson via cctalk > wrote: > > On 10/06/2018 01:40 PM, Al Kossow via cctalk wrote: >> could be part of a 4200 or a VM >> http://www.ricomputermuseum.org/Home/small-systems-at-ricm/cpt-4200-series-typewriter >> since the date codes are early, i'd guess the 4

Re: CPT boards

On 10/06/2018 01:40 PM, Al Kossow via cctalk wrote: could be part of a 4200 or a VM http://www.ricomputermuseum.org/Home/small-systems-at-ricm/cpt-4200-series-typewriter since the date codes are early, i'd guess the 4200 Possibly, although there are quite a few ICs with 1976 and 1977 date cod

Re: Digico computer

On 10/06/2018 03:46 AM, Christian Corti via cctalk wrote: On Fri, 5 Oct 2018, it was written I worked with DIGICO?s in 1974. Is it red? Does it have a manual pull through paper tape reader? Was it made in the UK? I am most interested Yes, it is red and has a small reader on the front plate. Th

Re: CPT boards

could be part of a 4200 or a VM http://www.ricomputermuseum.org/Home/small-systems-at-ricm/cpt-4200-series-typewriter since the date codes are early, i'd guess the 4200 Mike might be able to ID the boards On 10/6/18 10:48 AM, Jules Richardson via cctalk wrote: > > I borrowed a pile of scrap 1

CPT boards

I borrowed a pile of scrap 1970s-era PCBs from my local recycler yesterday, just to make sure there was nothing important among them before they go off for processing. Among them are six boards branded as CPT, which I assume (as I'm in MN) is the CPT Corporation that was in Minneapolis. The

RE: Digico computer

Hallo Christian Wie gesagt, ich habe 1974 mit diesen Systemen gearbeitet. Ich würde gerne wieder einen Lauf sehen. Ich glaube, du bist in der Nähe von Stuttgart. Ich lebte 1969/70 in Maichingen. Ich komme zwar mehrmals im Jahr nach Deutschland, aber nach Friedricshafen für einen Urlaub. Was k

RE: Digico computer

On Fri, 5 Oct 2018, it was written http://www.vintage-icl-computers.com/icl49c Drawings for 16V here No, only some non-readable pictures of drawings :-( I should ask the guy to scan them reasonably. Christian

RE: Digico computer

On Fri, 5 Oct 2018, it was written I worked with DIGICO?s in 1974. Is it red? Does it have a manual pull through paper tape reader? Was it made in the UK? I am most interested Yes, it is red and has a small reader on the front plate. The machine seems to be complete (expect the disk drive that