> From: Peter Van Peborgh
> From: Antonio Carlini
> From: Jim Stephens
Everyone: please DO NOT send messsages to CCTalk/CCTech with no Subject: line
in the header: that results in un-linked, and thus un-clickable, entries in
the archive (which some of, like me, use to read the list),
Thanks for the reply, Glen.
Now, I am not sure where I got that info from, but I believe it was from
this list or maybe netbsd-vax.
My SQ703s have an unpopulated area near the 50 pin connector, and are of
one of the later versions. I have always assumed that was for extra
drivers to do
On Sun, Aug 16, 2020 at 8:24 AM Nigel Johnson via cctalk
wrote:
>
> So I would like to convert a brand-new DQ703 I have to SQ706 so I can
> mount SCSI disks.
>
> I understand it is just a prom change.
>
> Does anybody have any info, or perhaps a PROM image?
>
The two Dilog SQ703 and SQ706
On Sun, Aug 16, 2020 at 5:39 PM Thomas Moss via cctalk <
cctalk@classiccmp.org> wrote:
> Hi All,
>
> I'm looking for the following parts to configure my TU56 for use with a
> TD8-E:
>
> G742 (Positive Logic Jumper Card)
> M960 (TU56/TD8-E Command Cable Connector)
> M961 (TU56/TD8-E Data Cable
Hi All,
I'm looking for the following parts to configure my TU56 for use with a
TD8-E:
G742 (Positive Logic Jumper Card)
M960 (TU56/TD8-E Command Cable Connector)
M961 (TU56/TD8-E Data Cable Connector)
7008447 cable
H716 PSU
I'm happy to buy or trade, if there's anything you're looking for
On 16/08/2020 18:38, Peter Van Peborgh via cctech wrote:
Guys,
Anyone interested in my eBay posted punched card selection?
https://www.ebay.co.uk/mys/active
That link points to the items on sale for whoever clicks on it (so when
I click on it, I see my items!).
If you want to show your
On 2020-08-16 1:42 p.m., Dave Wade via cctalk wrote:
> Nigel,
>
> Have you thought about using the MFM emulator from
>
> https://www.pdp8.net/mfm/mfm.shtml
>
> I don't know how well it works with MicroVax...
A friend (in Toronto) is doing a run of these:
Shipping and a six pack of beer? Send me your address, note that the
USPS is running slow for some reason but I can send it priority mail
international. Value... a six pack of beer?
C
On 8/16/2020 3:19 PM, Nigel Johnson via cctalk wrote:
Chris, if I had that ESDI drive I could at least get a
Chris, if I had that ESDI drive I could at least get a system onto the
machine to explore further!
Where are you? Could you mail it to me in Toronto, Canada?
How much moolah do you need to do this?
cheers,
Nigel Johnson, MSc., MIEEE, VE3ID/G4AJQ/VA3MCU
Amateur Radio, the origin of the
Don't know much about the Dilogs (other than there were tape and disk
versions) but ESDI disks can still be found on Ebay, I have a spare
150mb drive if you need it. They are quite quick all things considered,
and some of the ESDI controllers had pretty good hardware acceleration
features in
Guys,
Anyone interested in my eBay posted punched card selection?
https://www.ebay.co.uk/mys/active
Thanks,
Peter vp
Nigel,
Have you thought about using the MFM emulator from
https://www.pdp8.net/mfm/mfm.shtml
I don't know how well it works with MicroVax...
Dave
> -Original Message-
> From: cctalk On Behalf Of Nigel Johnson
> via cctalk
> Sent: 16 August 2020 16:25
> To: cctalk@classiccmp.org
>
I do, but my Sage II is currently packed away. I'd have to make a disk
copy, I dont have the ability to image the boot disks otherwise. If you
can find no other source let me know and I will make you an OS disk or two.
Bill
Kennettclassic.com
Vintagecomputer.net
On Sun, Aug 16, 2020, 12:55 PM
I currently have 3 Stride 420 boards in various state of repair, one presumably
fully functional, and would need an OS set for these.
Anyone have actual floppies or IMD images of either ucsd.p or Liason OS for
these machines, or even just CP/M 68K ?
There are disk iimages under the header
Greetings.
I would like to solve a mistery regarding graphical user interface on a Sun
Ultra 10+ Creator3D UPA graphics card, running OpenBSD 6.7/sparc64.
Everything works fine with Solaris 10. Did anybody manage to get X running
on openBSD? Sparc64 support is somehow bogus so I feel that if I
I'm getting back to trying to restore my MicroVax II. Existing
controllers are ESDI and MFM, disks hard to find.
So I would like to convert a brand-new DQ703 I have to SQ706 so I can
mount SCSI disks.
I understand it is just a prom change.
Does anybody have any info, or perhaps a PROM image?
Looking for someone in the LA area who knows how to properly pack and a few
ship vintage items to be mailed to me. A computer, monitor and parts.
The seller is not experienced in this and as a result the first thing that
I got from him (A Model 33 Teletype top) was trashed. I don't want the
17 matches
Mail list logo
