On Wed, Apr 21, 2021 at 09:53:26PM +0100, Antonio Carlini via cctalk
wrote:
> I've managed to reconstitute my SIMH config and I've checked out a few
> of the ISO files I managed to generate using ddrescue.
>
> The Mar 89 CONOLD and May 89 CONDIST do not even show up as media
> under Linux. If I
On 21/04/2021 22:13, Peter Coghlan via cctalk wrote:
I've just tried ANALYZE/DISK on VAXBINMAY931 which is the oldest I can
put a hand on right now and it gives exactly the same output as you got.
Thanks ... that's reassuring. Individual savesets can be tested with
BACKUP/LIST or (more
On 2021-04-20 17:14, Richard Cini wrote:
If you can hear the eject motor, you may want to inspect the eject
gear. I know I’ve had to replace them on both of my //gs drives.
They’re 3D printed and I think I found them on eBay or one of the 3D
services. I forget. I do remember it was $15 for 2.
Antonio Carlini wrote:
The oldest working one is the 1989 July CONDIST, which read 99.99% with
ddrescue. It mounts quite happily and I can see the directory. ANA/DISK
complains slightly:
[
$ ana/disk dua3:
Analyze/Disk_Structure for _VAX072$DUA3: started on 21-APR-2021 21:11:34.25
I've managed to reconstitute my SIMH config and I've checked out a few
of the ISO files I managed to generate using ddrescue.
The Mar 89 CONOLD and May 89 CONDIST do not even show up as media under
Linux. If I get the chance I'll try out the Oxford GAME store polisher
for one at least of
On 4/21/2021 12:31 PM, Chris Zach via cctalk wrote:
Well, it probably is lighter than the one with 2 RL02's :-)
On 4/21/2021 2:32 PM, Glen Slick via cctalk wrote:
On Wed, Apr 21, 2021 at 8:18 AM Jeffrey S. Worley via cctalk
wrote:
There's a nice, working PDP 11/23 with 20 meg hdd and
Well, it probably is lighter than the one with 2 RL02's :-)
On 4/21/2021 2:32 PM, Glen Slick via cctalk wrote:
On Wed, Apr 21, 2021 at 8:18 AM Jeffrey S. Worley via cctalk
wrote:
There's a nice, working PDP 11/23 with 20 meg hdd and 1meg (!!) of ram,
with terminal screens indicating full
On 2021-04-21 08:35, Tapley, Mark B. via cctalk wrote:
I have forgotten, is this the same drive type where the lubrication
eventually turns gummy and needs to be cleaned off and replaced by
something with the original, relatively low viscosity? I recall that
being an issue with some 3.5”
On Wed, Apr 21, 2021 at 8:18 AM Jeffrey S. Worley via cctalk
wrote:
>
> There's a nice, working PDP 11/23 with 20 meg hdd and 1meg (!!) of ram,
> with terminal screens indicating full operation. The asking price is
> $900.00, but I imagine the fellow might negotiate. Shipping is gonna
> be a
On 2021-Apr-21, at 1:49 AM, Christian Corti via cctalk wrote:
> I'm trying to find out if the BASIC dialect that was available for the MINCAL
> computers (aboutn 1971) was something derived from another "system" or
> whether it was an own dialect.
>
> Some characteristic instructions that I
I would be happy to take the VT220 but I am in Manchester and unlikely to
travel to London just for this. I have had one posted successfully before,
happy to cover any costs for good packing, postage and for your time.
Regards
Rob
> -Original Message-
> From: cctalk On Behalf Of
On Wed, 21 Apr 2021, it was written
If there are FORTRAN-esque commands added to the core Dartmouth version I
would search for another instance prior to MINICAL where this was done.
Back then BASIC flavors and adaptations were becomming common so it may
simply be MINICAL BASIC would have been
There's a nice, working PDP 11/23 with 20 meg hdd and 1meg (!!) of ram,
with terminal screens indicating full operation. The asking price is
$900.00, but I imagine the fellow might negotiate. Shipping is gonna
be a fair penny.
best,
Jeff
On 21/04/2021 13:27, Andrew Luke Nesbit via cctalk wrote:
With a heavy heart I need to find a new home for the following beautiful
hardware:
- Sun Blade 10 mini tower
I've just realized this is a typo. It should be:
- Sun Ultra 10 mini tower
I will write to all who have expressed
> On Apr 20, 2021, at 5:14 PM, Richard Cini via cctalk
> wrote:
>
> [EXTERNAL EMAIL]
>
> If you can hear the eject motor, you may want to inspect the eject gear. I
> know I’ve had to replace them on both of my //gs drives. They’re 3D printed
> and I think I found them on eBay or one of the
> On Apr 21, 2021, at 6:19 AM, Bill Degnan via cctalk
> wrote:
>
> It is not too hard to imagine a professional programmer who took a copy of
> Dartmouth BASIC and adapted it for this flavor of BASIC, but I personally
> dont have any reference docs about it or proof.
I’m not sure I would
On Wed, 21 Apr 2021 at 14:27, Andrew Luke Nesbit via cctalk
wrote:
>
> Hello all again,
>
> With a heavy heart I need to find a new home for the following beautiful
> hardware:
>
> - AlphaServer DS15 server
> - Sun SPARC Enterprise T5140 1U rack server
> - Sun Blade 10 mini tower
> - HP
On 4/21/21 2:41 PM, mazzinia--- via cctalk wrote:
Ach,
If only I was in UK ☹
Me too :-(
-Original Message-
From: cctalk On Behalf Of Andrew Luke Nesbit
via cctalk
Sent: Wednesday, April 21, 2021 2:27 PM
To: The Rescue List ; cctalk@classiccmp.org; t...@tuhs.org
Subject: FTAG:
Ach,
If only I was in UK ☹
-Original Message-
From: cctalk On Behalf Of Andrew Luke Nesbit
via cctalk
Sent: Wednesday, April 21, 2021 2:27 PM
To: The Rescue List ; cctalk@classiccmp.org; t...@tuhs.org
Subject: FTAG: AlphaServer DS15, Sun T5140, Sun Blade 10, HP Proliant DL380 G7,
Hello all again,
With a heavy heart I need to find a new home for the following beautiful
hardware:
- AlphaServer DS15 server
- Sun SPARC Enterprise T5140 1U rack server
- Sun Blade 10 mini tower
- HP Proliant DL380 G7 2U rack server
- DEC VT220 with screen, keyboard, and various
It is not too hard to imagine a professional programmer who took a copy of
Dartmouth BASIC and adapted it for this flavor of BASIC, but I personally
dont have any reference docs about it or proof.
If there are FORTRAN-esque commands added to the core Dartmouth version I
would search for another
Hi,
I'm trying to find out if the BASIC dialect that was available for the
MINCAL computers (aboutn 1971) was something derived from another "system"
or whether it was an own dialect.
Some characteristic instructions that I can't find somewhere else are:
- Formatted output with PRINT FOR()
> Wow, sorry about that... Do folks here have an alternative service they
> like/recommend for sharing linked photos to the list?
>
They work fine for me in the "New" Edge, Chrome and Firefox. Noel, do you
have the updated Chromium based Edge or "Legacy" edge ?
Not sure why they don't work
23 matches
Mail list logo
