I am not aware of any 'standard' Data General CRT terminal with a model
number greater than 1400 - but I recall the 52xx model numbers were used
for special custom, hand-held wands, scanners and "mini-terminals" that
may be connected to a standard DG terminal or keyboard. Just send a
picture
Hello all,
I have a Data General Model 5220 MT terminal I picked up recently. Sadly, no
keyboard. I am trying to find out if the terminal will use a standard AT
keyboard (based on the connector) or if I need to find a special DG keyboard.
Any help is appreciated.. in fact any information about
Further review: Looking at photo IMG_6081.jpg it shows the layouts of
the boards. Specifically A1 is the pre-regulator board pn 5061-3457
which is the one with the caps and A2 is Inverter board PN 5061-3454.
I think if your PS doesn't work one problem is these boards are
backwards. Don't know
Hi Guy!
Thanks for the post and interesting. No it's not quite the exact power
supply but close. However
Are you *sure* those cards are in the right slots?
Reason I am asking: When I look at the HP docs they label the
Pre-regulator board as A3A1. A3A1 also has the red LED. The inverter
> On Sep 10, 2021, at 12:21 PM, Paul Flo Williams via cctalk
> wrote:
>
>> ...
>
> https://hisdeedsaredust.com/2021/09/10/colour-separations-with-graphicsmagick.html
Paul,
You said "At the moment, I’ve been picking the colour by choosing an image with
a large area of blue, pulling it
Bitraf[1] is moving, and the NDwiki[2] server moves with it. The move
starts Saturday September 11th 2021 at 12:00 hours local time, and is
expected to be completed sometime before midnight.
References:
1) https://bitraf.no/
2) http://www.ndwiki.org/
--
Regards,
Torfinn Ingolfsen
Here are some disassembly pics of a HP 5061-6615 power supply.
http://everist.org/pics/hp1000_ps/5061-6615.zip 2.9M
Details:
HP 1000 Model 2113E SN 2340A03701 OPT 004 014
power supply Model 5061-6615SN 2340
Not the exact same PS as yours, but it might help?
My problem is
On Fri, 3 Sep 2021 10:10:50 +0100
Antonio Carlini via cctalk wrote:
> On 02/09/2021 20:51, Paul Flo Williams via cctalk wrote:
> >
> > I haven't finished writing this up, but my workflow tends to be to
> > produce a Group4 TIFF from the colour scan by simple thresholding
> > (or first dropping
