On Sun, 17 Oct 2021 14:52:33 -0400
Jesse Dougherty via cctalk wrote:
> I have A series servers, parts, interface cards, and probably any
> accessory that you might need. If anyone is looking for any HP 1000 A
> series hardware, let me know. I still have a few of these loaded A990
> boxes that
On 2021-10-17 11:22 p.m., Grant Taylor via cctalk wrote:
On 10/17/21 9:09 PM, Toby Thain via cctalk wrote:
Hi,
Hi,
I'd like to find homes for:
22 x 11" reels
5 x 9"
2 x 7"
Most rated up to 6250bpi, a handful to 3200bpi. Some CONTROL DATA
branded, rest mixed brands. All in decent
On 10/17/21 9:09 PM, Toby Thain via cctalk wrote:
Hi,
Hi,
I'd like to find homes for:
22 x 11" reels
5 x 9"
2 x 7"
Most rated up to 6250bpi, a handful to 3200bpi. Some CONTROL DATA
branded, rest mixed brands. All in decent condition.
Is there anything on them that might be
Hi,
I'd like to find homes for:
22 x 11" reels
5 x 9"
2 x 7"
Most rated up to 6250bpi, a handful to 3200bpi. Some CONTROL DATA
branded, rest mixed brands. All in decent condition.
Located: Toronto Canada, will post for cost of shipping by Canada Post
(reimbursed PayPal). First come,
On Sun, 17 Oct 2021 14:52:33 -0400
Jesse Dougherty via cctalk wrote:
> I have A series servers, parts, interface cards, and probably any
> accessory that you might need. If anyone is looking for any HP 1000 A
> series hardware, let me know. I still have a few of these loaded A990
> boxes that
Does anyone have information on a SMC*11E controller? Appears to be a two-drive
SMD controller for Unibus (hex height module). Looking the connectors over, it
looks like it'd probably drop into a MUD slot and use the SPC pins.
Thanks,
Jonathan
Yep, the link below is the disk image of MS-DOS ported to the
displaywriter. I have it booting fine, but my attempts to write a new disk
from the greaseweazel with some dos software to try running is not going
well.
The tool I usually use to open DOS disk images and add files does not like
that
The Displaywriter is not natively DOS based, but I assume you know this and
that's not what you are saying. Instead someone internally at IBM or
otherwise ported DOS 1.25 for a non native system (the Displaywriter). In
short I dont know of any IBM MS DOS 1.25 for Diplsaywtiter, at.least when
I
On 10/17/21 2:18 PM, Joshua Rice wrote:
I saw that exact thread, and was as intrigued as you. Looks like it
didn’t have any graphics capability, but instead had a text-based
terminal built in. Quite unusual to see such a basic machine with such a
capable CPU.
The Infoworld article claimed
http://www.bitsavers.org/bits/IBM/Displaywriter/SSSD_20210926/MSDOS.IMD
I have a copy of the disk this image was made from booted on my DW, and am
trying to load easywriter or a little basrun compatible basic program onto
an 8" disk with my greaseweazle.
Not having much luck with the HxC
I have A series servers, parts, interface cards, and probably any
accessory that you might need. If anyone is looking for any HP 1000 A
series hardware, let me know. I still have a few of these loaded A990
boxes that I can do $1,700.00 each
www.ebay.com/itm/384211227987
Thanks
Jesse
Cypress
> On Oct 17, 2021, at 4:33 PM, Jules Richardson via cctalk
> wrote:
>
>
> Hey all,
>
> Someone in one of the Facebook vintage groups that I'm in just picked up a
> Computhink Eagle 32, an early-ish (appears to be circa 1981/82) 68000-based
> machine with integral display and keyboard.
I
Hey all,
Someone in one of the Facebook vintage groups that I'm in just picked up a
Computhink Eagle 32, an early-ish (appears to be circa 1981/82) 68000-based
machine with integral display and keyboard.
On the rear it has a 50-pin connection for floppy and a 34-pin connection
for a hard
13 matches
Mail list logo
