Also, when the tapes arrive, are there recommendations in case their
drive belts are gone?
You can 3D-print replacements.
Use Innoflex filament, 100% fill-in and the following OpenScad formula :
module ring(d1,d2,w)
{
difference()
{ cylinder( w, d1/2, d1/2, $fn=230);
cylinder(
I have seen both upper and lower...if you fish through you can find what
you need here:
https://www.vintagecomputer.net/digital/PDP11-40/
https://www.vintagecomputer.net/digital/PDP11-40_full-height/
https://www.vintagecomputer.net/digital/PDP11-40_industrial11/
Bill
On Mon, Dec 6, 2021 at 2:03
On 12/7/2021 4:38 PM, Jan-Benedict Glaw via cctalk wrote:
Hi!
Some time ago, I got my hands on a DECtape II, though no tapes.
That'll change after a long time and in a few days, even multiple
tapes will come in.
With that drive, I started some first tests. It's PSU seems to be
all fine,
Hi!
Some time ago, I got my hands on a DECtape II, though no tapes.
That'll change after a long time and in a few days, even multiple
tapes will come in.
With that drive, I started some first tests. It's PSU seems to be
all fine, providing stable 5 and 12 V.
It's board's wire wrapping is in
I would be interested in an inlay - I have an RK11-C, but no indicator
panel.
Also, if someone (else, presumably) does up a replica of the indicator
panel board (perhaps with the option to use LEDs, with some resistor
packs that could be bypassed for lamps), I'd be interested in that, too.
Board cost depends on quantity, the more you have made, the lower the
per board cost.
PCBCart.com charges a "tooling" charge for a new design. They do look
over the designs carefully and reorders don't incur that charge.
To get an idea, I had a run of Joerg Hoppe's DEC Flip-Chip Extender
I've used PCBCart.com to have thousands of boards produced. Mostly with
gold fingers
They've done a good job with the boards, though they're mostly two-layer
and not overly complicated.
You just tell them how many gold fingers you want (and if you get it
wrong, their design check will
If anyone needs a backplane or two please contact me off list.
Thanks, Paul
On Mon, Dec 6, 2021 at 11:02 PM Fritz Mueller via cctalk <
cctalk@classiccmp.org> wrote:
> > On 12/6/21 5:50 PM, Mike Katz via cctalk wrote:
> > For other boards without gold fingers where would you recommend and how
>