The 3 bergs to unibus was used in the RK8-E, the unibus end plugging into
the first physical drive.
Between unibus backplanes were always M920, M9202, bus margin jumpers,
which i can't remember the part numbers, and various Albe and other non-dec
options. The cable was always a BC11A-XX, i think
Hi Noel,
If you have a minute, call me.
Thanks, Paul
On Sat, Jun 20, 2015 at 1:53 PM, Noel Chiappa j...@mercury.lcs.mit.edu
wrote:
{Re-send, since apparently a lot of mail to CCTalk yesterday went into the
bit
bucket...}
I guess I've struck out here? That's such bad luck; other things,
Hi Noel,
If you get a minute call me this afternoon or evening.
Paul
On Fri, Jun 19, 2015 at 11:32 AM, Noel Chiappa j...@mercury.lcs.mit.edu
wrote:
I guess I've struck out here? That's such bad luck; other things, there are
multiple copies out there, but apparently none at all of this
Hi Mark,
Do you just need a 4 or 9 slot backplane?
I Don't see the need for a repeater unless I'm missing something.
Paul
On Mon, Jun 15, 2015 at 10:57 AM, Mark J. Blair n...@nf6x.net wrote:
Has anybody ever made a UNIBUS repeater with a high speed serial link
between the bus segments yet?
BC11-A is flat, guessing 4 inches wide, but you man make nice 90 degree or
what ever angle you need easily.
On Mon, Jun 15, 2015 at 11:06 AM, Mark J. Blair n...@nf6x.net wrote:
On Jun 15, 2015, at 09:02, Guy Sotomayor g...@shiresoft.com wrote:
I'm not specifically familiar with the
print to read.
On Wed, Jun 10, 2015 at 9:24 PM, Paul Anderson used...@gmail.com wrote:
I might have a set and will try to check tomorrow.
On Wed, Jun 10, 2015 at 12:08 PM, Noel Chiappa j...@mercury.lcs.mit.edu
wrote:
So I'm working with a group of 'busted' DZQ11's (the symptom is that
Master
please contact me of list if interested.
401 - 407 of 407 matches
Mail list logo