On 6/20/23 11:08, Plamen Mihaylov via cctalk wrote:
> I have 2.2 kernel installed on that particular machine. What
> drivers/modules should I use?
>
You're looking for ftape for your particular distro.
https://tldp.org/HOWTO/Ftape-HOWTO.html
also:
I have 2.2 kernel installed on that particular machine. What
drivers/modules should I use?
On Tue, Jun 20, 2023 at 8:41 PM Chuck Guzis via cctalk <
cctalk@classiccmp.org> wrote:
> On 6/20/23 10:08, Plamen Mihaylov via cctalk wrote:
> > I have the same ftape drive and looking for a suitable
On 6/20/23 10:08, Plamen Mihaylov via cctalk wrote:
> I have the same ftape drive and looking for a suitable solution to use
> tapeutils/dd on it.
>
Have you tried installing the ftape driver on a pre-2.6 kernel Linux?
Old versions of NetBSD had a similar driver installation (used it, but
don't
I have the same ftape drive and looking for a suitable solution to use
tapeutils/dd on it.
On Tue, Jun 20, 2023 at 12:42 AM Chuck Guzis via cctalk <
cctalk@classiccmp.org> wrote:
> I have an Irsin 225 drive and associated software. I can post the
> latter if you'd like.
>
> --Chuck
>
I have an Irsin 225 drive and associated software. I can post the
latter if you'd like.
--Chuck
Hello Lothar
I checked my stock, and found the drive . Irwin Rhomat model 285-EE-10.
Sorry, but I could not find the software
Regards
Nico
On 2023-06-19 17:50, Nico de Jong via cctalk wrote:
Hello
I believe I have the software at home, but I will not be able to check it
before Tuesday, as I
Several versions of EZTape are on Minus as well.
https://www.minuszerodegrees.net/software/software.htm
There is a TFORMAT.COM in the 1.13 version.
>
> Hello,
>
> I have a number of DC1000 tape cartridges, with and without relevant data
> on them.
> I have 2 questions:
>
> 1. Has anybody the
Hello
I believe I have the software at home, but I will not be able to check it
before Tuesday, as I am out of town for the time being. As far as I remember,
the IRWIN drive (at least the one I have) was seen as a floppy disk, and had to
be connected to the floppy controller.
I’ll be back
Nico
On 6/15/23 02:36, Lothar Schröder via cctalk wrote:
> Hello,
>
> I have a number of DC1000 tape cartridges, with and without relevant data on
> them.
> I have 2 questions:
>
> 1. Has anybody the IRWIN TFORMAT software?
> 2. I want to make images from the cartridges.
>Has anybody done this?