[cctalk] Re: Shot In the Dark: Compaq System Manager Facility

[Ali via cctalk]

>compaq-system-config-us-proliant-3000-333.disk1.gz
> compaq-system-config-us-proliant-3000-333.disk2.gz
> compaq-system-config-us-proliant-3000-333.disk3.gz
> compaq-system-config-us-proliant-3000-333.disk4.gz

> In my collection that I think I used to configure a Proliant 3000 with EISA 
> bus.


Hi Warner,

Thanks but that is the ECU set for EISA systems. This would be far older - i.e. 
maybe before even the first ServicePaqs came out. 

I get the feeling Compaq never put it on the FTP because by then they had 
discontinued the EISA card and replaced it with a new one. So the only way 
anyone would have one is if they had the card with the original software.

-Ali

[cctalk] Re: Shot In the Dark: Compaq System Manager Facility

[Warner Losh via cctalk]

I have

compaq-system-config-us-proliant-3000-333.disk1.gz
compaq-system-config-us-proliant-3000-333.disk2.gz
compaq-system-config-us-proliant-3000-333.disk3.gz
compaq-system-config-us-proliant-3000-333.disk4.gz

In my collection that I think I used to configure a Proliant 3000 with EISA
bus.

is that useful?

Warner

On Sat, Jul 15, 2023 at 5:43 PM Ali via cctalk 
wrote:

> Really long shot, and I have asked here before without much luck, but
> anyone
> have a copy of the Compaq System Manager Facility 1.10 or 1.11 (or any
> version for that matter). This would have been released in 1994/95 time
> frame and is necessary for the use of the Compaq Server Manager/R EISA
> board. This is a very early EISA RILO board for the System Pro and Proliant
> line of servers. Please note this is not the same as the System Management
> Agents nor the Insight Manager. TIA!
>
> -Ali
>
>
>
>