I have some of these connectors (from ECS) for $10 each
Shipping in the US is a flat rate $8.30
(Poor) pictures at
http://bonedaddy.net/tgoodman/photos/tgoodman/ECS-Connector/
Todd
On 6/19/2020 5:19 PM, Vincent Slyngstad via cctalk wrote:
On 6/19/2020 12:24 PM, Robert Armstrong via cctalk
>Josh Dersch
> one half-height (used upside down).
Thanks, Josh - I hadn’t thought about using an extender card "backwards".
That's a good idea. Next question is "how many extender cards do I have?"...
Better go start digging.
In the meantime I did some more fooling around with
On 6/19/2020 12:24 PM, Robert Armstrong via cctalk wrote:
Ok, maybe a bad bit in the command register so I'll check it out. But then
it dawns on me - how do you work on this thing? It's three boards connected
with "over the top" connectors - you can't use a module extender on it.
Worse, the
On Fri, 2020-06-19 at 12:24 -0700, Robert Armstrong via cctech wrote:
> It appears that my RK8E has a problem - it fails the diskless
> control test
> with
>
> .R DHRKAE.DG
> SR=
>
> COMMAND REGISTER ERROR
> PC:1160 GD: CM:0001
> DHRKAE FAILED PC:6726
On Fri, Jun 19, 2020 at 12:24 PM Robert Armstrong via cctech <
cct...@classiccmp.org> wrote:
> It appears that my RK8E has a problem - it fails the diskless control
> test
> with
>
> .R DHRKAE.DG
> SR=
>
> COMMAND REGISTER ERROR
> PC:1160 GD: CM:0001
>
It appears that my RK8E has a problem - it fails the diskless control test
with
.R DHRKAE.DG
SR=
COMMAND REGISTER ERROR
PC:1160 GD: CM:0001
DHRKAE FAILED PC:6726 AC: MQ: FL:
WAITING
Ok, maybe a bad bit in the command
