Hi Al & list,
Sorry for the delay, but the files should be readable now.
On 18-11-16 19:00, Al Kossow wrote:
Fred, could you make these files readable, please
Apparently Filezilla in the new configuration needs more configuration.
The URL again:
Fred, could you make these files readable, please
On 11/15/16 11:44 AM, Fred Jan Kraan wrote:
>
> Forgot the URL: http://fjkraan.home.xs4all.nl/comp/divcomp/NCD/
>
> Forwarded Message
> Subject: NCD16 images. Was: NCD19 / Xncd19
> Date: Tue, 15 Nov 2016 20:
> Is the 701 based on the RacerX from LSI?
Good question...nice shout-out for an obscure MIPS variant. The
Explora 700 is, however, not a RacerX, but an R4700. With up to 256MB
of RAM. Which is nice.
KJ
On 11/15/16 3:34 PM, Rico Pajarola wrote:
> Unfortunately, no new
> manuals that are not already on bitsavers (except for the Explora 400
> brochure).
>
I scanned a NCD16 users manual and uploaded it to bitsavers yesterday and
created a list of the part numbers of the manuals I know about.
You can get the latest NCBridge software from
http://www.thinpathsystems.com/index.php?modules=support=patches=ncb
On Wed, Nov 16, 2016 at 12:34 AM, Rico Pajarola wrote:
> Found it!
>
> I spent a few hours digging through my storage and against all odds I
> found both the CD
Found it!
I spent a few hours digging through my storage and against all odds I found
both the CD with a backup of everything I had collected from various
internet sites as well as the original NCD boot tape release 2.3.0.
While I'm searching for a working tape drive, here's the contents of the
On 2016-11-15 14:58, Ken Seefried wrote:
From: Rico Pajarola
Does no one have NCDWare 3.2.1 or earlier?
Nostalgia...I really liked the NCD 19 I used many moons ago.
Reasonably snappy at the time, nice mono screen, quiet. Funny enough
I recently resurrected an NCD Explora
On 15/11/2016 20:54, Jay West wrote:
Chris wrote... I have a Raspberry Pi 3 with a USB Ethernet
dongle that it’s plugged into, but I can’t remember how to use ARP on
an isolated network to find the IP address of the other system. If
anyone has any pointers, I’d definitely appreciate
From: Rico Pajarola
> Does no one have NCDWare 3.2.1 or earlier?
Nostalgia...I really liked the NCD 19 I used many moons ago.
Reasonably snappy at the time, nice mono screen, quiet. Funny enough
I recently resurrected an NCD Explora 701 (much later MIPS-based
xterminal). It's
Chris wrote...
I have a Raspberry Pi 3 with a USB Ethernet dongle that it’s plugged into, but
I can’t remember how to use ARP on an isolated network to find the IP address
of the other system. If anyone has any pointers, I’d definitely appreciate them.
As I recall, ping the
> I have a Raspberry Pi 3 with a USB Ethernet dongle that itâ??s plugged into,$
You can use ARP for that only after it comes up far enough to get an
address and speak ARP.
If the Pi 3 is anything like the one I had the misfortune to deal with
at work a while back, it's running a Linux with a
Similarly, I’m trying to resurrect an NCD Explora Pro, and haven’t found much
more than broken links. It’s one of their “plug a keyboard, mouse, and monitor
into the box” X terminals.
Plugging in a keyboard, mouse, VGA panel, and Ethernet, I get a steady green
light at startup and “donk donk”
permission denied
On 11/15/16 11:44 AM, Fred Jan Kraan wrote:
>
> Forgot the URL: http://fjkraan.home.xs4all.nl/comp/divcomp/NCD/
>
> Forwarded Message
> Subject: NCD16 images. Was: NCD19 / Xncd19
> Date: Tue, 15 Nov 2016 20:42:16 +0100
> From:
Forgot the URL: http://fjkraan.home.xs4all.nl/comp/divcomp/NCD/
Forwarded Message
Subject: NCD16 images. Was: NCD19 / Xncd19
Date: Tue, 15 Nov 2016 20:42:16 +0100
From: Fred Jan Kraan <fjkr...@xs4all.nl>
To: cctalk@classiccmp.org
Hi,
Some 20 years ago I briefly ha
Hi,
Some 20 years ago I briefly had some NCD16's and found some of the
tarred images and software from those days. Hopefully it survived the
various media transfers.
Fred Jan
On Tue, Nov 15, 2016 at 6:02 PM, Ethan Dicks wrote:
> On Tue, Nov 15, 2016 at 11:15 AM, Rico Pajarola wrote:
> > Does no one have NCDWare 3.2.1 or earlier? I just need the firmware for
> the
> > terminal, the host software is completely optional for my
On Tue, Nov 15, 2016 at 11:15 AM, Rico Pajarola wrote:
> Does no one have NCDWare 3.2.1 or earlier? I just need the firmware for the
> terminal, the host software is completely optional for my purpose.
I was asking about NCD software just last month, for a Tektronix X221CHT /
I don't think I have any real documentation, just various NCDWare releases
ranging from 3.5 to 5.1. But I'll check.
But I have stupidly misplaced my copy of 3.2.1 (the last version to support
the NCD19...).
Does no one have NCDWare 3.2.1 or earlier? I just need the firmware for the
terminal, the
If you turn up NCD info, I'd like to add it to bitsavers.
On 11/14/16 3:33 PM, Rico Pajarola wrote:
> Hi all
>
> I'm trying to resurrect my NCD19 for vcfe.ch but I can't find the firmware
> for it (I have half a dozen different versions of NCDware, but most don't
> contain the boot images, and
Hi all
I'm trying to resurrect my NCD19 for vcfe.ch but I can't find the firmware
for it (I have half a dozen different versions of NCDware, but most don't
contain the boot images, and none have the binary for the ncd19, only
ncd15b, ncd19r, ncd19c etc. which don't work). And all links I find on
20 matches
Mail list logo