On 12/29/18 6:59 PM, Brad H via cctalk wrote:
And then other boards used a 3A-xx number instead of the 2A2001 number.
Kind of confusing.
For what it's worth, looking at a photo, my[1] machine's board looks more
like "3P10083 REV A" down by the front edge of the board, unless there's
some
> Some small companies would give employees extreme discounts if they
assembled one themselves using mostly parts which had been deemed too >
>obsolete for production.
I was thinking something like that, or it was repaired at one point and this
particular board was on hand to use as a replacement.
om: Sam O'nella [mailto:baryth...@gmail.com]
Sent: Saturday, December 29, 2018 2:48 PM
To: Brad H ; General Discussion:
On-Topic and Off-Topic Posts
Subject: Re: Osborne-1 with prototype-based motherboard
Maybe too easy but have you asked the seller if they know anything about
it's origins
alk@classiccmp.org
Subject: Re: Osborne-1 with prototype-based motherboard
On 12/29/18 2:53 PM, Brad H via cctalk wrote:
> Am just posting this as I am hoping someone out there knows someone
> who was involved with Osborne back in the day to find out more this
> Osborne 1 motherboard I f
On Sat, 29 Dec 2018, Sam O'nella via cctalk wrote:
Maybe too easy but have you asked the seller if they know anything about
it's origins? I'd also guess maybe an employee or it could just be one
of the 6 motherboard types as someone else commented. Pretty awesome
though with the low serial. Tha
On Sat, 29 Dec 2018, Chuck Guzis via cctalk wrote:
I first saw the O1 when Richard showed me into a room with the various
bits strewn about on a tabletop (no case yet). I opined that it would
never sell with the tiny display.
I had known that Lee was working on something like that, but no deta
On 12/29/18 2:53 PM, Brad H via cctalk wrote:
Am just posting this as I am hoping someone out there knows someone who was
involved with Osborne back in the day to find out more this Osborne 1
motherboard I found in a low serial O1 I picked up for $100.
Is it just the board layout that's differe
machines in the same serial range or even lower that don't
have the Revision that came after.
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Al Kossow via
cctalk
Sent: Saturday, December 29, 2018 2:09 PM
To: cctalk@classiccmp.org
Subject: Re:
Maybe too easy but have you asked the seller if they know anything about it's
origins? I'd also guess maybe an employee or it could just be one of the 6
motherboard types as someone else commented. Pretty awesome though with the low
serial. Thanks also for the blog. I had no idea about the diffe
On 12/29/18 12:53 PM, Brad H via cctalk wrote:
> I reached out to Lee Felsenstein on it and he suggested it was related to
> the boards produced for the 10 prototypes Osborne built
I'm pretty sure I threw one of those out about five years ago.
Will dig through the archive to see if there are
On 12/29/18 12:53 PM, Brad H via cctalk wrote:
> I've posted a blog about it here with a picture of the board for those
> curious: http://bradhodge.ca/blog/?p=1186
If you can run down any of the old Sorcim crowd, say, Richard Frank or
Marty Herbach, they might have saved some information.
I fir
Am just posting this as I am hoping someone out there knows someone who was
involved with Osborne back in the day to find out more this Osborne 1
motherboard I found in a low serial O1 I picked up for $100.
I reached out to Lee Felsenstein on it and he suggested it was related to
the boards pro
12 matches
Mail list logo