Photo Sharing (Was RE: DEC BA11-K KY11-L mounting brackets -- how?)

> Wow, sorry about that... Do folks here have an alternative service they > like/recommend for sharing linked photos to the list? > They work fine for me in the "New" Edge, Chrome and Firefox. Noel, do you have the updated Chromium based Edge or "Legacy" edge ? Not sure why they don't work

Re: DEC BA11-K KY11-L mounting brackets -- how?

> From: From: Fritz Mueller > two solutions come to mind -- the one you mention here with nut and > washer, or inserting a hex-head machine screw in the other direction. > Either the nut or the hex-head screw could then be secured with a small > combination wrench. Well, if

Re: DEC BA11-K KY11-L mounting brackets -- how?

> Now that I've thought about it for a bit, I wonder if you can use a > nut-and-washer in place of the press fit threaded bushing at the bottom (but > otherwise all the hardware,and insertion directions, will be the same); it > will be kind of difficult to get the nut in there with the KY11-L

Re: DEC BA11-K KY11-L mounting brackets -- how?

>> From: Fritz Mueller >> my brackets just have a punched oval hole at the bottom, and not a >> "tapped hole" per your description above. > The adapters on mine look _almost_ identical to yours, but _definitly_ > have a #8 press fit threaded bushing at the bottom. Now that

Re: DEC BA11-K KY11-L mounting brackets -- how?

Thanks for the info, Noel. There seem to be several small oddities with this cabinet (there was also a puzzle I posted about here a while back, related to securing the power monitor board; it turned out with that one that this cabinet is missing some internal mounting tabs that other folks'

Re: DEC BA11-K KY11-L mounting brackets -- how?

> From: Fritz Mueller > Pictures of my brackets should be viewable at > https://photos.app.goo.gl/wni3mDAQHozK9Ho27 I couldn't get them to display on my modern Window laptop, using either the Edge or Explorer browsers. I had to get my wife to show them to me on her Apple laptop. Not

Re: DEC BA11-K KY11-L mounting brackets -- how?

Thanks Paul, Henk! Yup, it sure looks like there was more than one design for this...

RE: DEC BA11-K KY11-L mounting brackets -- how?

: On-Topic and Off-Topic Posts Subject: RE: DEC BA11-K KY11-L mounting brackets -- how? Is this what you mean Fritz? www.pdp-11.nl/pdp11-34a/pdp11-34general.html at the bottom. Van: Fritz Mueller via cctalk<mailto:cctalk@classiccmp.org> Verzonden: zondag 18 april 2021 23:00 Aan: G

RE: DEC BA11-K KY11-L mounting brackets -- how?

Is this what you mean Fritz? www.pdp-11.nl/pdp11-34a/pdp11-34general.html at the bottom. Van: Fritz Mueller via cctalk Verzonden: zondag 18 april 2021 23:00 Aan: General Discussion: On-Topic and Off-Topic

RE: DEC BA11-K KY11-L mounting brackets -- how?

z Mueller via cctalk Sent: Monday, April 19, 2021 1:45 AM To: General Discussion: On-Topic and Off-Topic Posts Cc: Noel Chiappa Subject: Re: DEC BA11-K KY11-L mounting brackets -- how? > On Apr 18, 2021, at 7:40 PM, Noel Chiappa wrote: > There's an intermediate 10" or so high adapte

Re: DEC BA11-K KY11-L mounting brackets -- how?

> On Apr 18, 2021, at 7:40 PM, Noel Chiappa wrote: > There's an intermediate 10" or so high adapter piece (one either side, of > course) mounted to the KY11-L... on the bottom, a single 1" or so machine > screw (#8, I think) goes through the vertical tab on the side at the front of > the

Re: DEC BA11-K KY11-L mounting brackets -- how?

> From: Fritz Mueller > I'm reassembling an PDP-11/34 in a BA11-K chassis right now, and am a > little puzzled by the front mounting brackets (the ones that hold a > KY11-L of either sort on the bottom, and a half trim-panel on the top). > In particular, on the bottom half,

Re: DEC BA11-K KY11-L mounting brackets -- how?

> On Apr 18, 2021, at 4:57 PM, Mark J. Blair via cctalk > wrote: > I'm not at home with the machine now, but if I remember (or get reminded in > the next day or three), I'll try to take some pictures of my PDP-11/34A to > help you out. Thanks, Mark. I'll get some pictures of the brackets I

Re: DEC BA11-K KY11-L mounting brackets -- how?

I'm not at home with the machine now, but if I remember (or get reminded in the next day or three), I'll try to take some pictures of my PDP-11/34A to help you out. -- Mark J. Blair, NF6X https://www.nf6x.net/