> From: Christian Gauger-Cosgrove
> From the KDJ11-E module user's guide ... the solder-side of the CD
> fingers is left unpopulated, but for the +5 and ground pins.
> The only PMI compatible option then would be the KTJ11-B UNIBUS adapter.
I forget how the -11/84-94 backplane is
On Tue, 22 Feb 2022 at 16:10, Henk Gooijen via cctalk
wrote:
> half populated with memory. I don’t think you can add memory
> externally. But I might be wrong …
>
You are not wrong. From the KDJ11-E module user's guide (on BitSavers)
the solder-side of the CD fingers is left unpopulated, but
On 2/22/22 16:15, Bill Gunshannon via cctalk wrote:
On 2/22/22 16:09, Henk Gooijen via cctalk wrote:
I always thought that you cannot add (PMI) memory to an 11/93.
There are two versions of the 11/93. One with 2 MB, the other
with 4 MB of memory _on board_. And that’s it.
If you have an 11/93
On 2/22/22 16:09, Henk Gooijen via cctalk wrote:
I always thought that you cannot add (PMI) memory to an 11/93.
There are two versions of the 11/93. One with 2 MB, the other
with 4 MB of memory _on board_. And that’s it.
If you have an 11/93 CPU with 2 MB on board, the board is just
half
I always thought that you cannot add (PMI) memory to an 11/93.
There are two versions of the 11/93. One with 2 MB, the other
with 4 MB of memory _on board_. And that’s it.
If you have an 11/93 CPU with 2 MB on board, the board is just
half populated with memory. I don’t think you can add memory
On 2/22/22 12:55, Noel Chiappa via cctalk wrote:
> From: Bill Gunshannon
> Just wish I could get some PMI memory for that 93.
?? The KDJ11-E in the -11/93 comes with a minimum of 2MB on the CPU card.
That's enough for almost 16 maximum-sized processes (assuming they aren't
sharing
> From: Bill Gunshannon
> Just wish I could get some PMI memory for that 93.
?? The KDJ11-E in the -11/93 comes with a minimum of 2MB on the CPU card.
That's enough for almost 16 maximum-sized processes (assuming they aren't
sharing program texts - almost double that, if they are). Does