Hi Santo Nucifora and Cameron Kaiser
Your email addresses have bounced.
Please send a private mail to me with a useful
email address.
Dwight
From: cctalk on behalf of dwight
Sent: Wednesday, November 16,
On Wed, 16 Nov 2016, Jay West wrote:
I have never seen where paying someone on ebay via paypal required them
to "accept the funds". They just "get them" I thought.
If they do not HAVE a Paypal account (or CLOSED one??),
then a payment to them would consist of Paypal sending them an email
PBS tonight...Watch TV along with Ed# Recording studio history... This
is the sounds of our music! - check your time guide for AZ pm - however
calif and others can differ Soundbreaking - Painting with Sound #102 Tuesday,
November 15, 09:00 pm on 8.1 ((AZ TIME Othere state PBS check your
On 11/16/2016 3:30 PM, Jay West wrote:
So I took a chance.
...
Seller hasn't responded to any of the previous emails, nor have they
acknowledged the purchase in any way.
...
Crossing my fingers
Give it a few weeks. He could be out on
the Tundra somewhere. (Is there a
Tundra
> On Nov 15, 2016, at 5:40 PM, Josh Dersch wrote:
>
> ...
> I noticed the following commented-out line at the beginning of the program:
>
> START:
> ; RESET ;CLEAR THE WORLD
> ; MOV #P7,PS ;LOCKOUT P1 BY RAISING CPU PRIORITY <<
So I took a chance.
Seller hasn't responded to any of the previous emails, nor have they
acknowledged the purchase in any way.
Something I have never seen before in all my ebay transactions... when I go
into ebay instead of a greyed out $ symbol (unpaid) or black $ symbol (paid)...
it
Seller hasn't responded to any of the previous emails, nor have they
acknowledged the purchase in any way.
Crossing my fingers
On Wed, 16 Nov 2016, j...@cimmeri.com wrote:
Give it a few weeks. He could be out on the Tundra somewhere. (Is there a
Tundra in Alaska?!)
IF he has a valid
Could be a number of things. Usually the seller has setup the wrong email
address in eBay. I.e. they put in an email address for their PayPal account
that does not match the actual PP account. If he is real a quick call to eBay
will get it fixed.
Original message
From: Jay
> > > > This is all the seller's responsibility. All Jay has to do is wait.
> > >
> > > If he put down the wrong email address, that would explain why no replies
> > > to inquiries
> >
> > Possibly, but not entirely since eBay has its own webmail system. I
> > presume any seller
> > would
Give PP a call, not had this problem before but they have been very helpful
each time
-pete
On Wed, Nov 16, 2016 at 12:43 PM, Fred Cisin wrote:
> On Wed, 16 Nov 2016, Jay West wrote:
>
>> I have never seen where paying someone on ebay via paypal required them
>> to "accept
This is all the seller's
responsibility. All Jay has to do is wait.
- J.
On 11/16/2016 3:58 PM, Pete Lancashire
wrote:
Give PP a call, not had this problem before but they have been very helpful
each time
-pete
On Wed, Nov 16, 2016 at 12:43 PM, Fred Cisin wrote:
On Wed, 16 Nov 2016, j...@cimmeri.com wrote:
This is all the seller's responsibility. All Jay has to do is wait.
Meanwhile, the seller is impatiently waiting, while closely monitoring the
wrong account, waiting for it; eventually giving up and relisting the
item?
Bruh, fishslayer40 is obviously out slayin' fishes.
On Wed, Nov 16, 2016 at 2:27 PM, j...@cimmeri.com wrote:
>
> Possibly, but not entirely since eBay has its own webmail system. I
> presume any seller
> would occasionally log in to check for activity on one's listed items.
If he put down the wrong email address, that would explain why no replies to
inquiries
On 11/16/16 2:17 PM, Fred Cisin wrote:
> On Wed, 16 Nov 2016, j...@cimmeri.com wrote:
>> This is all the seller's responsibility. All Jay has to do is wait.
>
> Meanwhile, the seller is impatiently waiting,
On 11/16/2016 5:17 PM, Fred Cisin wrote:
On Wed, 16 Nov 2016, j...@cimmeri.com
wrote:
This is all the seller's
responsibility. All Jay has to do is
wait.
Meanwhile, the seller is impatiently
waiting, while closely monitoring the
wrong account, waiting for it;
eventually giving up and
Possibly, but not entirely since eBay
has its own webmail system. I presume
any seller
would occasionally log in to check for
activity on one's listed items.
- J.
On 11/16/2016 5:20 PM, Al Kossow wrote:
If he put down the wrong email address, that would explain why no replies to
Had the same problem with a seller. I always got the "seller hasn't
accepted the payment. It was trying because ebay didn't give them the
correct info when they cheked into it. Finally, the seller checked the
account details and said the account was linked to an "email" address that
they hadn't
> Is the 701 based on the RacerX from LSI?
Good question...nice shout-out for an obscure MIPS variant. The
Explora 700 is, however, not a RacerX, but an R4700. With up to 256MB
of RAM. Which is nice.
KJ
On 2016-Nov-16, at 8:44 PM, Jon Elson wrote:
> On 11/16/2016 10:10 PM, drlegendre . wrote:
>> "Note the "tube audio" folks gravitate to that stuff and tend to cause
>> seriously sick prices, because tubes."
>>
>>
>> FYI - I've installed dozens of the new-production CE / Mallory caps, all of
>>
"The mains-side filter caps for switching supplies tend to be large in
capacitance (100-200 and > uF), and typically are not suitable for
replacing the ~ 8-40uF B+ filter caps in vintage tube electronics that have
tube rectifiers."
This is true.
All of the common vacuum diode rectifiers have
Hi all --
Got myself a TI-990/189 single-board computer based around the TMS9980
microprocessor (actually, a variant of it, the MP9529, which apparently
differs only in that it has a lower maximum clock and only requires Vdd
of 9.3V or so...)
It was advertised as "it looks like it's
On Tue, Apr 5, 2016 at 10:38 AM, Henk Gooijen
wrote:
> I realize that I have not done much (any) "advertisement" ...
>
> I have my collection in a "room" of some 2250 sq. feet (200 m2).
> Almost all PDP-11 models (UNIBUS and QBUS), a few VAX4000's, VLC4000,
> and a
> Tony that would be great; mine is a VMI monitor too. I'm sure Bitsavers
> would appreciate a copy!
I think all PERQ 1 (and 1A) monitors were VMI.
2T1's have KME portrait monitors (at least in the UK)
2T2's (and 2T4's) have either Three Rivers portrait or Moniterm
landscape monitors (I have
On Sat, Nov 12, 2016 at 5:35 PM, Scott Baker wrote:
> Hi*
>
>>> Any chance it could be put into 'production'?
>
> *I placed an order today for 3 RL02 emulator interface boards from OshPark.
> I expect it will take 2 weeks to get the boards back from OshPark.
> I am
Are you saying there is a -12V test point and there is nothing there ?
If +5 is 400mV high, that's not dangerous but it is something I'd take care
of first.
-pete
On Fri, Nov 11, 2016 at 8:35 PM, Michael Newton
wrote:
> Thanks for the encouragement. I'm going in.
>
>
>> Anybody have extra DEC or IBM terminals in Toronto (Canada) ?
> Is Ottawa too far away?
While we're speaking of Ottawa and terminals...it's neither DEC nor
IBM, but I do have a Hazeltine in Ottawa I would like to get rid of,
but I do not like the idea of just chucking it. Anyone interested?
Hi*
>> Any chance it could be put into 'production'?
*I placed an order today for 3 RL02 emulator interface boards from OshPark.
I expect it will take 2 weeks to get the boards back from OshPark.
I am leveraging RL02 emulator work from Reinhard Heuberger, but I am
using a newer FPGA board than
If you can't find a replacement that is "NEW" and by that I mean made in
the past couple years ...
It has been > 30 years since I've been inside a 4051
your best bet might bt to take an axle (wires out both ends) leaded cap and
doing things like standing it on end and use a wire that runs down
Here you go - http://m88k.com/XEBEC_104788G.BIN
On Mon, Nov 14, 2016 at 3:57 PM, Al Kossow wrote:
> I just started cataloging and dumping firmware my SASI/SCSI disk and tape
> boards
> starting with Xebec. It would be nice to find images for the two alternate
> fw
> proms
Yeah, unfortunately Ottawa is a bit too far for me.
But if it wasn¹t I¹d be looking at that AS/400.
-brian
On 2016-11-11, 11:37 AM, "cctech on behalf of Mike"
wrote:
>On Monday, November 07, 2016 17:22:22 Brian Adams wrote:
>> The
Just on the off-chance... does anyone have schematics for the Perq 1
portrait monitor? Mine is sick... and there are none on bitsavers. On
first power-up there was a faint raster pattern but that quickly
vanished and now there's no sign of life from the tube heaters...
Thanks
Mike
On 11/13/2016 12:10 PM, Pete Turnbull wrote:
> On 13/11/2016 15:52, dwight wrote:
>
>> I've created a simple debugging board that one can plug onto the
>> KIM's expansion buss that has debug code on it. It allows one to find
>> out what is failing on the KIM so they know what to replace.
>>
>>
On 11/15/16 2:37 PM, Curious Marc wrote:
Great link! That's a great middle ground - preserves the look without having to
find the original cap.
Marc
On Nov 15, 2016, at 11:15 AM, Mattis Lind wrote:
One of the DC filter capacitors has gone open circuit in my Tektronix
On Fri, Nov 11, 2016 at 02:03:36PM -0800, Ian S. King wrote:
>
> Somewhere I have a photo of the machine that IBM used to make punch cards.
> It's in a small museum in Endicott, NY. It did indeed take a roll of paper
> made to IBM specs and produce the flat punch cards many of us know and some
>
As far as creating text files in firmware directories, yes
There probably should be something on github if a bunch of people are going to
be editing files
that could be pulled.
I'm NOT going to put up any sort of Wiki though. Bitsavers stays a collection
of files that can
be easily mirrored
Actually it'll use a EEPROM for the 6530 emulator. I've located
some small 28C64s. The advantage is that these can be programmed
with the debug board while on the KIM board. It should look good as
well because it will be tucked under the 6532. The registers are slightly
different on the 6530
On 11/15/16 3:34 PM, Rico Pajarola wrote:
> Unfortunately, no new
> manuals that are not already on bitsavers (except for the Explora 400
> brochure).
>
I scanned a NCD16 users manual and uploaded it to bitsavers yesterday and
created a list of the part numbers of the manuals I know about.
Would Al catalogue these for us ?
Dave
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Alexandre
> Souza
> Sent: 16 November 2016 00:38
> To: General Discussion: On-Topic and Off-Topic Posts
>
> Subject: Re: ISO Xebec S1410A
38 matches
Mail list logo