On 11/21/18 7:36 PM, Mike Stein wrote:
Al,
If you're looking for a service manual for that HP2624 you might have a look at
the manual for the MAI 4309; it's the same board with a few minor differences
(memory) and different firmware.
And of course it's on bitsavers ;-)
mike
thanks!
It
Al,
If you're looking for a service manual for that HP2624 you might have a look at
the manual for the MAI 4309; it's the same board with a few minor differences
(memory) and different firmware.
And of course it's on bitsavers ;-)
mike
On Wed, Nov 21, 2018 at 7:23 AM Mike Stein via cctalk
wrote:
>
> BTW, for some reason I get some of your (Al's) posts _after_ I've received
> replies to them, sometimes almost a day later; very confusing. It seems to be
> related to the fact that some of your posts are addressed to
>
On Wed, 21 Nov 2018 10:22:16 -0500
Mike Stein via cctalk wrote:
> - Original Message -
> From: "Al Kossow via cctalk"
> To:
> Sent: Tuesday, November 20, 2018 7:44 PM
> Subject: Re: Battery warning in Falco terminals
>
>
> >
> >
>
- Original Message -
From: "Al Kossow via cctalk"
To:
Sent: Tuesday, November 20, 2018 7:44 PM
Subject: Re: Battery warning in Falco terminals
>
>
> On 11/20/18 12:33 PM, Mike Stein via cctalk wrote:
>
>> BTW, what's the story on Richard in
On 11/20/18 12:33 PM, Mike Stein via cctalk wrote:
> BTW, what's the story on Richard in SLC; is there a new address for the
> Terminal Wiki?
>
https://terminals-wiki.org/wiki/index.php/Main_Page
- Original Message -
From: "Brent Hilpert via cctalk" Sent: Tuesday, November 20, 2018 2:07 PM
Subject: Re: Battery warning in Falco terminals
> I did happen to RE the keyboard and analyse it's functioning some as it
> needed repair, so that's included in th
On 2018-Nov-20, at 11:42 AM, Al Kossow via cctalk wrote:
> I just bought the users and programming manuals for the TS-1, need to get
> those scanned today.
--
You should have asked ;-)
I think I've got 4 or 5 spare copies somewhere ;-)
=
> On 11/20/18 11:28 AM,
- Original Message -
From: "Brent Hilpert via cctalk"
To: "General Discussion: On-Topic and Off-Topic Posts"
Sent: Tuesday, November 20, 2018 2:28 PM
Subject: Re: Battery warning in Falco terminals
On 2018-Nov-20, at 1:21 AM, Mike Stein via cctalk wrote:
>
On 11/20/18 11:51 AM, Brent Hilpert via cctalk wrote:
> Just curiousity, but was there something special about the Falcos that's
> generating particular interest, or of note?
>
Mostly that they are uncommon.
I suspect with the NiCd batteries that very few still work
and unfortunately, they
On 2018-Nov-20, at 11:18 AM, Paul Koning wrote:
>> On Nov 20, 2018, at 2:07 PM, Brent Hilpert via cctalk
>> wrote:
>>
>> ...
>> The PCB-transformer key design is novel, but (in the TS-1) so is the
>> scanning & communication.
>> There is no microcontroller on the keyboard, scanning is
On 2018-Nov-20, at 11:42 AM, Al Kossow via cctalk wrote:
> On 11/20/18 11:28 AM, Brent Hilpert via cctalk wrote:
>
>> Were there 3 PROMs on the TS-1? I don't remember
>
> There are three bipolar proms on the 2624 that you can see on the pcb picture
> I still need to dump those, only one is
On 11/20/18 11:28 AM, Brent Hilpert via cctalk wrote:
> Were there 3 PROMs on the TS-1? I don't remember
There are three bipolar proms on the 2624 that you can see on the pcb picture
I still need to dump those, only one is socketed.
It looks like the keyboard is very similar in the 2624 with
On 2018-Nov-20, at 1:21 AM, Mike Stein via cctalk wrote:
> - Original Message -
> From: "Al Kossow via cctalk"
> To: "General Discussion: On-Topic and Off-Topic Posts"
> Sent: Monday, November 19, 2018 6:29 PM
> Subject: Battery warning in Falco terminals
> ...
>> Also, I suspect the
> On Nov 20, 2018, at 2:07 PM, Brent Hilpert via cctalk
> wrote:
>
> ...
> The PCB-transformer key design is novel, but (in the TS-1) so is the scanning
> & communication.
> There is no microcontroller on the keyboard, scanning is performed by the
> main unit, it sends a key matrix address
On 2018-Nov-20, at 5:11 AM, Al Kossow via cctalk wrote:
> On 11/19/18 11:54 PM, Brent Hilpert wrote:
>
>> I didn't have need / get as far as doing an I/O map or memory map for the
>> Z80.
>>
>> Should I send these files along?
>>
>
> Yes, please to dumps/docs and board/terminal pics from you
On 11/19/18 11:54 PM, Brent Hilpert wrote:
I didn't have need / get as far as doing an I/O map or memory map for the Z80.
Should I send these files along?
Yes, please to dumps/docs and board/terminal pics from you and Mike!
I'm sure Richard would appreciate these as well for the terminals
- Original Message -
From: "Al Kossow via cctalk"
To: "General Discussion: On-Topic and Off-Topic Posts"
Sent: Monday, November 19, 2018 6:29 PM
Subject: Battery warning in Falco terminals
...
> Also, I suspect the first generation of terminals all have similar hardware
> with
On 2018-Nov-19, at 3:29 PM, Al Kossow via cctalk wrote:
> I've been helping the MAME guys simulate a TS-2624, which is a block mode HP
> emulating terminal.
> I had bought this a while ago, and never dumped the firmware. Unfortunately
> there is a large
> NiCd battery right in the middle of the
Just had a closer look at the TS-2624 and it does indeed have the battery on
the board; looks like that's one of the differences from the TS-1x.
Looks like I or someone had enough foresight to remove it from this board
before it caused any damage.
m
- Original Message -
From: "Al Kossow via cctalk"
To: "General Discussion: On-Topic and Off-Topic Posts"
Sent: Monday, November 19, 2018 6:29 PM
Subject: Battery warning in Falco terminals
> I've been helping the MAME guys simulate a TS-2624, which is a block mode HP
> emulating
The later model 500/5000 have a small NiCd as well.
On 11/19/18 3:29 PM, Al Kossow via cctalk wrote:
> I've been helping the MAME guys simulate a TS-2624, which is a block mode HP
> emulating terminal.
> I had bought this a while ago, and never dumped the firmware. Unfortunately
> there is a
22 matches
Mail list logo
