Here is a link to a set of screen shot of the autoexec.bat and
config.sys for an IBM PC I came across today and the boot screen when
these are attempted without the networking hardware attached..
https://www.vintagecomputer.net/IBM/5150/5150_DEC/
Specific to IBMPC to DECNET networking...anyone
clues if your Alpha uses VMS
https://www.vintagecomputer.net/browse_thread.cfm?id=610
Clues if DEC UNIX
https://www.vintagecomputer.net/browse_thread.cfm?id=679
b
On Wed, May 18, 2022 at 1:45 PM Craig Ruff via cctech
wrote:
>
>
> > On May 18, 2022, at 11:00, cctech-requ...@classiccmp.org
https://philadelphia.craigslist.org/sys/d/kennett-square-vintage-computers/7480814347.html
I am clearing space at the museum. I really don't want to send
directly e-waste so consider making this large lot of 80's-early
2000's items for the low low price of $100 yours.
If you're a HAM fest/flea
Hi all...
What is the cable partnumber for the IMSAI SIO2? I need to order a
set of cables. I thought in all of my boxes and boxes of cables I
might have one...but nope.
Here is a picture:
Dave mcguire has one at LSSM near Pittsburgh
On Tue, Feb 15, 2022, 1:22 PM Mark Kahrs via cctech
wrote:
> I realize this a rare bird indeed, but would anyone just happen to have a
> Varian 620/L backplane netlist hanging around?
>
> Unless I missed it, the schematics on bitsavers do *not* have
It would be a lot easier to replace the large circular regulator if you're
taking the shotgun approach, and much more likely that the regulator is a
source of faults. and it's cheaper. For the h744, 45, 54. BUT measuring
things is the best way if you can do it. Pull the values from the
I have seen both upper and lower...if you fish through you can find what
you need here:
https://www.vintagecomputer.net/digital/PDP11-40/
https://www.vintagecomputer.net/digital/PDP11-40_full-height/
https://www.vintagecomputer.net/digital/PDP11-40_industrial11/
Bill
On Mon, Dec 6, 2021 at 2:03
I am unable to confirm for sure the memory assignment process for I know
without a doubt how to set their page assignments. I can guess but that's
dangerous and inefficient. I want to test an unknown core stack, so I need
to know which RAM space I am testing.
I have a PDP 8e core stack with the
into any problems. I am not sure if this particular disk image
results in a bootable disk or if it's a data disk (WordStar files).
Bill
On Fri, Aug 20, 2021 at 9:09 PM Fred Cisin via cctech
wrote:
> On Fri, 20 Aug 2021, Bill Degnan via cctech wrote:
> > Is there a simh for the otrona at
Fred,
Just for the purpose of imaging the disks, is there any reason I cant treat
these disks like any other 5 1/4" cpm 360k disk?
Bill
On Fri, Aug 20, 2021, 9:09 PM Fred Cisin via cctech
wrote:
> On Fri, 20 Aug 2021, Bill Degnan via cctech wrote:
> > Is there a simh for the otro
Was there a UNIBUS storage system that used a cassette player as the
storage device (like an old Panasonic or RadioShack cassette player),
rigged to send receive signals via a serial card connection. I.e. the
system would have one serial card for the terminal and another serial card
on a
Is there a simh for the otrona attache? I have some.disk images created
with Dunfield's utility..if not I will try to read them by using the Zorba
portable, which is pretty good with varied formats.
Bill
sorry...take that back misread.
On Tue, Aug 10, 2021 at 4:55 PM Bill Degnan wrote:
> re-do the headsink paste
>
> On Tue, Aug 10, 2021 at 4:55 PM David Coolbear via cctech <
> cctech@classiccmp.org> wrote:
>
>> My KA655 CPU is freezing during the power up sequence, after test number
>> 04:
>>
re-do the headsink paste
On Tue, Aug 10, 2021 at 4:55 PM David Coolbear via cctech <
cctech@classiccmp.org> wrote:
> My KA655 CPU is freezing during the power up sequence, after test number
> 04:
>
> KA655-B V5.3, VMB 2.7
> Performing normal system tests.
>
I put my FANUC tape reader for sale on Ebay, if anyone might be interested:
I noticed that there is no copy on bitsavers of the Konan Corp "The DJ 210"
SASI Controller OEM Reference Manual so I posted one on my web site:
https://www.vintagecomputer.net/cisc367/Konan_The_DJ_210_SASI.pdf
I am not 100% sure, but if I was to guess this info could be applied to
repairs for
Paul,
I have been compiling a library of such. Ioks here, if you are traveling
north swing by to review the books on hand. The one that comes to mind is
Thinking Machunrs by Berkeley but here on the patio at my parents house I
dont know the date. Harvard press put out some early computing books
Very good question!
Bill
On Sun, Jun 20, 2021, 4:44 AM Paul Birkel via cctech
wrote:
> I know of two early computer (in the stored program sense) programming
> books.
>
>
>
> 1951: Preparation of Programs for an Electronic Digital Computer
> (Wilkes, Wheeler, & Gill)
>
> 1957: Digital
Reflection 4 should do that, right?
Bill
On Fri, Jun 18, 2021 at 1:15 PM Douglas Taylor via cctech <
cctech@classiccmp.org> wrote:
> Does anyone have experience with the Reflection software that will
> emulate a DEC VT340 color graphics terminal?
>
>
On Tue, Apr 13, 2021, 2:19 AM steven--- via cctech
wrote:
> Bill said
> > I am looking for a video or photos that show how one removes the printer
> > from the keyboard safely on an ASR 33. I need to get to the underside of
> > the printer levers so I can re-align them. I am getting incorrect
I am looking for a video or photos that show how one removes the printer
from the keyboard safely on an ASR 33. I need to get to the underside of
the printer levers so I can re-align them. I am getting incorrect
characters when I type over half of the keys. I can see that a few levers
are out
Although this may not be what you're looking for, it's in the ballpark
(newer version?): Note the board part number and compare with yours, I
don't see off hand which board exactly you have.
https://www.vintagecomputer.net/intel/IMM_6-26/
Bill
On Wed, Mar 3, 2021 at 11:25 AM Jon Elson via cctech
Hi all.
I was wondering if there are any good online resources on reading for the
purpose of archiving 8-bit papertapes of unknown origin. I have been
reading tapes as text and also as binary, 8/n/1 thinking that's going to
capture everything. I load into a hex editor, and if necessary convert
Hi - I read on teraterm's forum or something like it that teraterm is not
really equipped to receive an inbound papertape reader dump into an ascii
file. What do those of you who have both windows and a tape reader use?
RealTerm? If so, what settings? I have been wresting with this for a
I put in a bid, I have a trailer and space...
On Wed, Jul 8, 2020 at 1:55 PM Al Kossow via cctech
wrote:
> On 7/8/20 9:28 AM, Mattis Lind via cctalk wrote:
> >
> > Not in best condition but probably worth rescuing. Maybe someone in NJ
> area
> > that want it?
>
> Hopefully someone can get those
On Wed, May 13, 2020 at 2:32 AM steven--- via cctech
wrote:
>
> > Here is the Ebay auction, I hope the manual is included assuming the
> 50-pin
> > port is the output port.
> >
> >
>
Following up on the results of my searching around. The FANUC A860 reader
with A20B controller (the normal set up) has a 50 pin output port. There
is a device one can buy that receives the signal from the FANUC's 50-pin
port and converts to into 25-pin RS232. The device is called a behind the
Not expecting a manual (but I did ask), looking to see if anyone has one,
I.have been searching
Bill
On Tue, May 12, 2020, 4:55 PM Al Kossow via cctech
wrote:
> On 5/12/20 1:42 PM, Bill Degnan wrote:
> > Al,
> > Here is the Ebay auction, I hope the manual is included assuming the
> 50-pin port
Al,
Here is the Ebay auction, I hope the manual is included assuming the 50-pin
port is the output port.
https://www.ebay.com/itm/GUARANTEED-GOOD-USED-FANUC-TAPE-READER-A860-0056-T020/392104833775?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
Bill
On Tue, May 12, 2020 at 4:33 PM Al
>
> I checked bitsavers.org but there was no manual there, anyone here have a
> PDF or URL of the PDF for the FACIT tape reader A860-0056-T020?
>
Sorry FANUC not "FACIT"
b
Turns out the "The Director" tape reader I purchased last week was
defective and I got a refund. So I thought I'd try my hand at the FANUC
TAPE READER A860. I may need to make a serial cable (?) to connect from
the internal connector don't know yet. Or maybe the internal 50-pin port
from the
Per my post from last week, after checking out the Decitek readers I ended
up getting a used by warrantied EECO "The Director" MT-82 tape reader with
a short-height spool for a good price.
Here is the manual.
http://www.bitsavers.org/pdf/eeco/DOC10006_EECO_MT-82_MTS-82_Mar82.pdf
Anyone use this
On Sat, May 2, 2020, 7:49 AM David Collins via cctech
wrote:
> I've pulled together details of the controller used with an HP2748 paper
> tape reader to dump a bunch of tapes from the HP Computer Museum's
> collection with the help of J. David Bryan.
>
> The details are at this link..
>
>
On Wed, Apr 29, 2020, 12:22 AM steven--- via cctech
wrote:
> Bill said
> > Hi - COVID project I have been attempting to read some old Honeywell
> > DDP-516 papertapes using the OP-80A or Teletype reader but it's
> inefficient
> > and I don't want to damage the tapes. Does anyone have a
For those of you who have used Dunfield's PTR program and the OP-80A, what
PC did you use? I am attempting with a Compaq 486. I apparently have to
add resistors to some of the lines to control voltage from the normally
outbound parallel port.
I may switch to the SOL-20 and use that computer's
Hi - COVID project I have been attempting to read some old Honeywell
DDP-516 papertapes using the OP-80A or Teletype reader but it's inefficient
and I don't want to damage the tapes. Does anyone have a reliable
papertape reader for sale, or recommend one currently out there on Ebay,
for the
On Thu, Apr 9, 2020, 6:01 PM David Gesswein via cctech <
cctech@classiccmp.org> wrote:
> On Wed, Apr 08, 2020 at 03:34:18PM -0400, Bill Degnan wrote:
> > Hi,
> > . FRTS
> >
> > ..dumps me to the * prompt ...
> >
> > *RKB0:ADVENT.LD [return]
> > * [esc]
> >
> > rather than loading ADVENTURE I
Hi,
I am sure this question has come up before, but can anyone advise an OS/8
change I can run to avoid the following issue (below)? I am unsure if I
need to fix my simh INI file or make more space for the program from the
OS/8 dot prompt, or FORTRAN * prompt.
Running pidp-8i (simh PDP 8i kit)
On Tue, Apr 7, 2020 at 12:09 PM Al Kossow via cctech
wrote:
> On 4/6/20 11:37 PM, Josh Dersch via cctalk wrote:
> > Subject line says it all. The Lambda uses this as its disk controller
> and
> > it's looking like the one in mine needs some debugging. There doesn't
> seem
> > to be any
Hi - I am looking for an IMSAI PCS 80-30 ROM image made for with the
Tarbell 1011 controller and Persci 277..anyone have this? I received a
system and drive but I think the ROM was replaced and since then I was told
the system would no longer boot.
In the meantime I am going to find a drive and
ANyone interested in a kind of beat up but complete model 32, and you're in
cincinnati to get it today or this weekend let me know by sending me a
message through my web site
https://www.vintagecomputer.net/contact.cfm
This is the fairest way, it takes the requests with a timestamp. I will
at should give you the pinout, want to borrow it?
>
> C
>
> On 2/18/2020 10:02 PM, Bill Degnan via cctech wrote:
> > Looking for a DECMATE (VT-278 model) RX278 Floppy Drive Interface
> Connector
> > cable, part number is RC26N-2L It's a 37 male-25 pin male cable.
> >
Looking for a DECMATE (VT-278 model) RX278 Floppy Drive Interface Connector
cable, part number is RC26N-2L It's a 37 male-25 pin male cable.
Here is photo I took of one (not mine)
https://www.vintagecomputer.net/digital/DECmate/DECMATE_VT278_PortsDriveCable.jpg
I have the pinouts for the 37-pin
Hi - I am looking for some help.
I have had a PDP 8e with RK05 drives that has run pretty reliably for many
years, but after moving it a strange symptom has come up, preventing it
from operating correctly. I am hoping someone can advise.
Here is an example
1. Power up drives and PDP 8e
2.
On Wed, Oct 2, 2019 at 4:39 AM Lars Brinkhoff via cctech <
cctech@classiccmp.org> wrote:
> Mark Kahrs wrote:
> > The first implementation was done for the 7090 by McCarthy (hence CAR
> > and CDR --- Contents of Address Register and Contents of Decrement
> > Register).
>
> Or was it an IBM 704?
>
>
> To echo what others have said:
>
> * you will have around an hour and a half at the museum. I would say
> that's about the right ballpark.
>
> * there are 2 _entirely separate_ museums on the Bletchley Park site:
> ** Bletchley Park: https://www.bletchleypark.org.uk/
> ** The National Museum
On Sat, Jul 6, 2019, 3:57 PM Peter Corlett via cctech
wrote:
> On Sat, Jul 06, 2019 at 12:54:28PM +0300, Bill Degnan via cctech wrote:
> > Hi...I am arriving at Gatwick Airport this weds evening1045pm and I have
> a
> > 17 hour layover. I'd like to visit the nation
Hi...I am arriving at Gatwick Airport this weds evening1045pm and I have a
17 hour layover. I'd like to visit the national computer museum at
bletchley park about an hour north. I see I can rent a car from the
airport and drive to a hotel near the museum. There are a few hotels with
24/7
>
>
>
> >
> > Looks like this:
> > https://share.icloud.com/photos/0NHNkEG9ssPsi65ojivBteKaQ
> >
> > Does this failure mode ring any bells? Obviously the video signal is
> being
> > generated well enough to sync a composite output. Any idea whether I
> > should start by replacing the CPU or the
correction to my earlier wording:
>
> So when someone replies to an email from the server I don't want the reply
> to come from the actual sender or it will bounce.
>
I mean I don't want the reply to go directly to the original sender email
address (sys...@microvax3100.vintagecomputer.net), I
>
>
> > > To: cctech
> > > Subject: setting reply to in VMS 5.x MAIL
> > >
> > > Is there a way to set the reply-to value in VMS 5 mail? I want to
> send mail as
> > > SYSTEM but anyone who receives the message on the outside world who
> > > wants to reply I'd like it go to to a different email
Is there a way to set the reply-to value in VMS 5 mail? I want to send
mail as SYSTEM but anyone who receives the message on the outside world who
wants to reply I'd like it go to to a different email address.
I am working to solve the problem myself, but if anyone knows already and
can help
why not post a few pics?
On Tue, Feb 19, 2019 at 11:50 AM Peter Van Peborgh via cctech <
cctech@classiccmp.org> wrote:
> Guys,
>
> I am wanting to determine which CDC (or possibly other) computer some of my
> modules came from. If you were a CDC employee around the time of CDC 6xxx
> computers,
What is the gold value?
On Mon, Feb 11, 2019, 6:11 PM mike via cctech wrote:
> Will I would be interested in some.
>
> Mike Zahorik
> (414) 254-6768
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of William
> Donzelli via cctalk
> Sent: Monday,
My PDP 11/40 suddenly lost it's ability to boot RL02 disks except the XXDP
disk. I have two drives, both boot up an XXDP (I have more than one) just
fine, but any formerly-working RT-11 (v 5, 5.1, 5.3) no longer boots, it
just hangs. I have been troubleshooting, running the 11/40 XXDP tests, but
>
>
>
> >
> > Random question:
> > Would you have bought this one if it were maroon instead of blue?
> >
> >
> https://www.ebay.com/itm/DEC-PDP-11-70-Datasystem-570-/113553953503?nordt=true_cvip=true
>
>
> As-is for $10K seems a little bit steep for a starting bid. But I haven't
> tried to buy an
On Thu, Jan 31, 2019 at 12:57 PM Glen Slick via cctech <
cctech@classiccmp.org> wrote:
> On Wed, Jan 30, 2019 at 7:49 PM Bill Degnan via cctech
> wrote:
> >
> > Random question
> > would you prefer having, if you had to pick only one, the original PDP
> > 11
Random question
would you prefer having, if you had to pick only one, the original PDP
11/70 or the newer "blue cabinets" PDP 11/70, assuming both were complete
configurations with racks of storage etc as they would have been sold, more
or less.
Assume space and power are not issues, consider
Just fixed a 66 Ampeg SB-13 guitar amp, the tubes are not cheap
On Wed, Dec 19, 2018, 5:26 PM Al Kossow via cctech
>
> On 12/19/18 12:17 PM, Bill Gunshannon via cctalk wrote:
>
> > You'll get my vacuum tubes when you pry them from my cold, dead hands.
>
> sure thing,
> let me know when you croak
On Fri, Dec 14, 2018, 6:11 AM E. Groenenberg via cctech <
cctech@classiccmp.org wrote:
> On Fri, December 14, 2018 11:41, Peter Van Peborgh via cctech wrote:
> > Fellow geeks of more mature vintage,
> >
> > Do any of you guys know whether it is possible to find out to whom any
> IBM
> > equipment
Thus electronic storage / scanning is probably the best alternative all
else considered. Everyone here can hope another like-minded soul will be
there to do what needs to be done when opportunity awaits
I saved a healthy run of early popular electronics mags from the
wilmington, delaware
On Fri, Oct 26, 2018 at 1:21 AM Al Kossow via cctech
wrote:
>
>
> On 10/25/18 4:00 PM, Eric Smith via cctalk wrote:
>
> > If you need a sheet-fed duplex scanner for B-size, expect to spend a
> pretty
> > good chunk of change even for a used one.
> >
>
> I've been through several million pages
I got a request for a scan of the Micro Peripherals Inc MPI 91/92 Product
Manual. I have the manual, I will scan it and post if no one has a copy.
But I don't want to go through the effort if it exists somewhere already.
I noticed on bitsavers there was no MPI nor Micro Peripherals Inc section
so
A complete general-purpose system complete with asr33 and XRAY compatible
papertapes would be awesome and pretty rare. Are there any complete 706 or
703s out there I wonder.
On Mon, Sep 24, 2018, 5:46 PM Al Kossow via cctech
wrote:
> sadly all that is there is some Data Products core memory
RCA made boards of this color and size, but not an exact match. Same
number of pins, similar blue.Not claiming it's RCA, but it's the
closest thing I have.
Here is one from a 1974ish COSMAC Microkit:
http://www.vintagecomputer.net/rca/COSMAC/RCA_GFA-3901808_front.jpg
On Wed, Sep 12, 2018 at
I have asked Paul Anderson to see if he has a BC80D-5K cable for a DECMATE
VT278 (same as VT78) to RX02 pedestal twin drive. I am also looking for
the OS/8 disks. I am pretty sure my VT278 works, I have some spare parts
too, just need the cable and the disks hopefully to have a working OS/8
I have what I believe to be two DEC RK05 bootstrap boards each with a ROM
labeled 802350 A. UNIBUS. The plastic handle tabs are Digital Equipm.'s
but it could be an OEM as there is nothing printed on them.
On the board is printed on what would be the bottom front side
R-K ABBR BOOT P.C. BOARD
If anyone is interested in a Wang Daisy Wheel Printer, Diablo same, Star
SG-10, TRS 80- DWP 510 and a few other things like that let me know and I
will pass your info along to a guy who contacted me through my web site. I
do not know the guy. I am not interested in these.
This person implied
Hi all...I got the following through my web site. Does anyone have a good
known-working test program for an AIM 65 cassette that I can attempt and or
send in response? I still have to set mine up and attempt to reproduce,
but someone here likely has more experience, it has been at least 5 years
IIRC that was one of the first donations to our club back in 2005
On Fri, Jul 20, 2018 at 1:04 AM Evan Koblentz via cctech <
cctech@classiccmp.org> wrote:
>
> >> A very big and expensive door stopper without OS tapes.
> >> But most importantly: the CPU board is missing!
> >> The card in slot 2
Does the cmc ada 1450 per interface come with the cassette? I have a
number of the earlier cassettes but not the 1450
On Fri, Jun 15, 2018, 3:04 PM Sellam Ismail via cctech <
cctech@classiccmp.org> wrote:
> New items added for June 15, 2018:
>
> Panasonic FT-70 Executive Partner
>
> Radio Shack
I have a diskette labeled
UNIX SYSTEM V
VPI UNIX
disk 'A'
(vpi)* 8/85
UniPress Software, Inc.
I have the small installation manual that talks about inserting the disk to
serialize it, and how to install UNIX onto the Lisa 2/10 in Mac XL Mode.
It is a small implementation of AT UNIX V.
The disk
https://www.ebay.com/itm/Pdp-8i-Computer-With-Tape-Readers/253588804132
I went to check this outthis is they guy with 10 PDP 8i's in a barn.
Looks like he cleaned one up.
I have more pictures on my web site, I had posted them here before, but I
thought they were overpriced
The VAX 4000-200 I exhibited two years ago at VCF East is up for sale:
Restoration Notes:
http://www.vintagecomputer.net/browse_thread.cfm?id=608
I don't need it as much anymore now that it's pretty much a completed
project. It's very upgrade-able though if you have the desire to boost
Anyone interested in buying a Burroughs L8000, currently San Antonio TX? If
so, contact me via http://www.vintagecomputer.net/contact.cfm and I will
put you in touch with the person who contacted me. I already have two or
three of these sojust kidding not personally interested in this.
Bill
On Sat, Mar 31, 2018, 4:26 PM Glen Slick via cctech <cctech@classiccmp.org>
wrote:
> On Sat, Mar 31, 2018 at 9:04 AM, Bill Degnan via cctech
> <cctech@classiccmp.org> wrote:
> >
> > FYI - Not sure if I mentioned this but I too am working on setting up a
> > D
On Sat, Mar 31, 2018 at 11:45 AM, Douglas Taylor via cctech <
cctech@classiccmp.org> wrote:
> Ethan;
>
> I have owned both BA213 and BA215 microvaxes. The one recurring problem I
> had was with the power supplies, H7868 I think the number is.
> Luckily, I picked up a couple of Dec Serv 550's
The 1969-71 AlphaCom terminal is a candidate for
https://terminals-wiki.org/
Here are some photos
http://www.vintagecomputer.net/browse_thread.cfm?id=502
I got this from the inventor's son. I am unsure how many of these were
made or put into production. The terminal kind-of worked for a while,
On Tue, Mar 6, 2018 at 2:29 PM, allison via cctech <cctech@classiccmp.org>
wrote:
> On 03/06/2018 12:09 PM, Bill Degnan via cctech wrote:
> > Looking for a reference manual to the NEC TK-80A trainer. Rev A.
> >
> > This one:
> > http://bugbookmuseum.blogspot.com
Looking for a reference manual to the NEC TK-80A trainer. Rev A.
This one:
http://bugbookmuseum.blogspot.com/2015/12/computer-tk-80-single-board-8080.html
Thanks
Bill
What is the OS of the disks, what system was this disk used to create/save
files to the RL02?
Bill
On Fri, Feb 9, 2018 at 6:24 PM, Paul Hardy via cctech wrote:
> Greetings,
>
> I have an old PDP-11 RL02 that I would like to read, to preserve its data
> for archival
https://retropopplanet.files.wordpress.com/2011/06/vintage-computer.jpg
I was not at this particular VCF out in California in the later 90's when
this photo of a DEC exhibit was taken; the original picture from vintage.org
is no longer hosted.
Does anyone have a copy of the old vintage.org
82 matches
Mail list logo