On Tue, Aug 8, 2017 at 10:48 AM, GerardCJAT via cctech
wrote:
> Seems it found a new home !! ( One bid )
>
> I am curious : From someone on this forum ???
>
> PS : I was NOT interested by this processor ;-)by now, I have my 1000
> Lseries to play with, that is
On Wed, May 31, 2017 at 10:28 AM, JCWelch via cctech
wrote:
> Hello,
> Does anyone have a setup to image RL02 packs to a pc file that can be mounted
> with simh? I have a couple of dozen I would like transferred because I am
> downsizing. I have a bunch of gear I can
An M5976 KZQSA is not MSCP compatible so it wouldn't do any good with a
PDP-11 system. It's really only useful for RRD4x SCSI CD-ROM drives with
VMS on a VAX 4000.
On Dec 6, 2017 9:47 AM, "Aaron Jackson via cctech"
wrote:
I'm looking after a VAX 4000 for a friend, which
On Sat, Mar 31, 2018 at 9:04 AM, Bill Degnan via cctech
wrote:
>
> FYI - Not sure if I mentioned this but I too am working on setting up a
> DECServer 550 to be an 11/83. Useful tips recently, thanks all.
> b
Using an M7554 KDJ11-D DECserver 550 CPU (in which case it
On Wed, Oct 24, 2018 at 4:07 PM David Coolbear via cctech
wrote:
>
> Does anyone know if any of these are still available for OpenVMS VAX?
917AA VAX LISP/VMS [LISP030] or [LISP031] was on VMS Consolidated
Software Distribution CD sets from at least Jan-1990 to May-1993
I have [LISP031] that I
On Mon, Nov 19, 2018 at 10:41 AM Alan Perry via cctech
wrote:
>
> Also, I have never worked on a CRT before. I am trying to find a local person
> who can observe me and stop me from doing something stupid. If I can’t find
> someone, what am I more likely to do wrong? How can I be sure I
On Fri, Jan 25, 2019 at 9:48 AM Jay West via cctech
wrote:
>
> Kudos to Jesse for working with me offlist, I feel I've gotten a good deal. I
> appreciate the offers to help purchase, very much, but I got this taken care
> of directly with Jesse and I'm happy.
>
> We have to understand, as
On Wed, Mar 13, 2019 at 9:01 AM Jesse Dougherty via cctech
wrote:
>
> 12016-60002 - SE Cable - card edge connector to 50-pin low density bail
> lock (M) - 2m (6.6ft) long
>
> If anyone has any of these, let me know, I can use about 4 of them.
>
> Thanks
> Jesse
> Cypress Technology Inc
>
Good
On Wed, Jan 30, 2019 at 7:49 PM Bill Degnan via cctech
wrote:
>
> Random question
> would you prefer having, if you had to pick only one, the original PDP
> 11/70 or the newer "blue cabinets" PDP 11/70, assuming both were complete
> configurations with racks of storage etc as they would have been
On Mon, May 27, 2019 at 4:14 PM shad via cctech
wrote:
>
> Hello,
> do you know the people who made the video?
> I think the factory is the Satilai in Saronno.
>
> Andrea
I believe those guys are based somewhere in the US. Sometime in the
last few months they made a trip exploring several
On Fri, May 10, 2019 at 4:14 AM Paul Birkel via cctech
wrote:
>
> Aficionados;
>
> I'm interested in acquiring an HP1000 A900, in any form-factor.
> (http://www.hpmuseum.net/display_item.php?hw=594)
>
> Basic need would be a chassis/backplane/PS and minimal set of
>
On Sun, Aug 11, 2019 at 7:44 PM Chuck Guzis via cctech
wrote:
>
> On 8/11/19 6:00 PM, Douglas Taylor via cctech wrote:
>
> > I just looked at the TC02 and the Qualstar, there are termination
> > resistor packs on each. The Qualstar has a bunch of 74LS240 IC's near
> > the J1 and J2 pertec
On Sat, Aug 10, 2019 at 9:46 AM Douglas Taylor via cctech
wrote:
>
> I bought the long cables off ebay, so they have to be good? Right? I
> think the short cables came from a hamfest.
>
> The cables can be fairly long, I remember interfacing a TU80 to an
> Emulex QT14 (maybe) and the DEC cables
M7608 == 4MB
M7609 == 8MB
AFAIK the only DEC 16MB Q-bus board is the MS650 M7622 for the KA640,
KA650, KA655, KA660
On Tue, Jul 9, 2019, 2:36 PM W2HX via cctech wrote:
> Hi there.
>
>
> I just acquired a board with the number M7609. It was advertised as an
> M630-CA which my research tells me
On Thu, Nov 7, 2019 at 6:36 PM Jules Richardson via cctech
wrote:
>
> On 11/6/19 12:16 PM, David Coolbear via cctech wrote:
> > M5976-AA KZQSA SCSI Controller Q
>
> Hmm, I could sure use one of those...
>
> I bought a bunch of QBus boards from my recycler quite some time ago, but
> the systems
I forgot that at some point they switched from 3.5-inch drives to
2.5-inch drives.
I just pulled the cover off my 1670E to check exactly what it has for
a hard drive. It is an IBM Travelstar model DBCA-203240, 3.2GB,
4200RPM, 2.5-Inch Hard Disk Drive with ATA/IDE Interface, with a date
code of
The HP 16500 / 1660 / 1670 series which have hard drives use standard IDE
drives.
They might be slightly picky about which drives work. Any drive larger than
around 2GB might have some issues.
Why do you ask?
On Sun, Jan 5, 2020, 6:42 AM GerardCJAT via cctech
wrote:
> This equipment is said
On Wed, Sep 23, 2020 at 11:51 AM Michael Engel via cctech
wrote:
>
> Hi,
>
> still working on backing up the Tektronix 440x disks. My current problem
> is that the ACB4000 SCSI-to-MFM adapter doesn´t support SCSI parity.
>
> I finally managed to find a PCI SCSI controller (Adaptec 2940) and a
>
On Mon, Mar 29, 2021, 8:02 AM Robert Armstrong via cctech <
cctech@classiccmp.org> wrote:
> Hopefully this is an easy question - are the sources for the XXDP
> diagnostics online anywhere? I particularly looking for NKXA, the
> Falcon-11/KXT11/DCT11 one.
Source code listing scans are
I also have multiple ESDI controllers, more than one these flavors:
Dilog DQ686
http://www.bitsavers.org/pdf/dilog/2120-0137-1_DQ686_Nov89.pdf
Emulex QD21
http://www.bitsavers.org/pdf/emulex/QD2151002-J_QD21_Jun90.pdf
Sigma SCD-RQD11-EC (There seems to be multiple versions from different
On Wed, May 18, 2022 at 11:25 AM Wayne S via cctech
wrote:
>
> I should have specifically said it’s Windows Nt. Issue is that it’s an
> Alpha so can’t use the usual software to change or remove the password
> unless there’s an Alpha version. Best suggestion so far is to use a version
> of
On Wed, May 18, 2022 at 10:45 AM Craig Ruff via cctech
wrote:
>
> > On May 18, 2022, at 11:00, cctech-requ...@classiccmp.org wrote:
> >
> > Got my Alphastation to boot but i can?t logon because i don?t the
> > administrator password? Any ideas on how to get past that?
>
> For VMS, if I recall
22 matches
Mail list logo