Re: mount question

On Mon, May 02, 2005 at 05:44:52PM +0200, Joerg Schilling wrote: Suid shell scripts work since approx. 25 years. Only on *some* operating systems. On others, the setuid/setgid bits are ignored when the kernel handles the shebang. Example 1: imadev:~$ uname -a HP-UX imadev B.10.20 A 9000/785

Re: support for dual-layer dvds?

Rob Bogus wrote: Geoffrey wrote: I've been googling around and such, but can't find anything on this. Is there support for burning dual-layer dvds? I'm running SuSE 9.2 and Red Hat Workstation 4. Pointers to any docs would be appreciated. Seeing no reply after all this time I assume you're on

Re: Problem with growisofs: CLOSE SESSION failed with SK=5h/ASC=72h/ACQ=03h

Hello one more time. Gergely, yesterday I opened growisofs_mmc.cpp and confirmed that it was patched. I also recompiled dvd+rw-tools and compared growisofs' md5sum to the one that I used in that burn and it was exactly the same. After reading the code I dont really know why the program didnt

Re: Problem with growisofs: CLOSE SESSION failed with SK=5h/ASC=72h/ACQ=03h

On Tue, 3 May 2005 12:11:34 -0300, [EMAIL PROTECTED] writes: Regarding my burning problem, I changed to kernel 2.6.11 and burned a dvd-r successfuly at 4x, and thats all I need. :) I guess that the problem was really in the scsi emulation, so it should be ok now. I'm happy to see, that

Problems recording a CD-R with LG4120B

Hello I am ryting to record a CD-R using my LG 420B drive. The LG can blank the media without a problem but when I try to burn an image this is what I got: Device type: Removable CD-ROM Version: 2 Response Format: 2 Capabilities : Vendor_info: 'HL-DT-ST' Identifikation :

Why actual speed is slower than nominal? (2.6x vs 4x)

Hi there, I am curious as to why the actual speed I get happens to be a lot slower than the nominal one. I am using Knoppix 3.8.1 with 2.6.11 kernel in /dev/hdc, and the DVD writer is /dev/hdd If I do not use hdparm to set the speed of /dev/hdd to udma2, then actual speed happens to be even

SCSI emulated drives back to IDE

Hello I would like to return my ide drives (dvd and dvdram drives) back to atapi. The first thing that I did was to remove devfs=mount hdc=ide-scsi hdd=ide-scsi from lilo.conf. After booting, Mandrake 10.0 cannot assign any device to the drives. Then I did: a) I've checked Mandrake control

cdrecord 2.01 do READ_BUFFER and crashes drive.

Had a bit of conversation over at usb-storage mailing list below. cdrecord 2.00.3 works fine with USB freecom drive, but cdrecord 2.01 crashes the firmware. Looks like there are two new READ_BUFFER scsi commands in 2.01, and the drive doesn't like the 2nd one with a large transfer length (0xfc00).