On Wed, 7 May 2008 21:47:51 -0400
"Clonch, Christopher A." <[EMAIL PROTECTED]> wrote:
> >> The main function of a switch is to keep irrelevant packets away from
>
> >> hosts, but packets to unknown (to the switch) hosts get sent
> >> everywhere, just like a Hub would do.
> >>
> >
> >yes - thanks
>> The main function of a switch is to keep irrelevant packets away from
>> hosts, but packets to unknown (to the switch) hosts get sent
>> everywhere, just like a Hub would do.
>>
>
>yes - thanks all, it appears its a cross network 'issue'
>
>thanks
If you're trying to get a MAC address across
On Thu, 2008-05-08 at 00:19 +0200, Kai Schaetzl wrote:
> Lanny Marcus wrote on Wed, 07 May 2008 15:10:58 -0500:
>
> You will need to make a list of all partitions. Not sure what the best way
> to do this would be. Probably fdisk. Run fdisk, then type "p" (for
> printing the partition table), th
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
> Behalf Of David Mackintosh
> Sent: Wednesday, May 07, 2008 3:40 PM
> To: CentOS mailing list
> Subject: Re: [CentOS] Archive-to-DVD
>
> > [encijan ~]$ rpm -qf /usr/bin/dirsplit
> > genisoimage-1.1.6-6.fc8
> > T
on 5-7-2008 3:19 PM Kai Schaetzl spake the following:
Lanny Marcus wrote on Wed, 07 May 2008 15:10:58 -0500:
Kai: I am not using Windows Boot Manager. Grub comes up, as on the 2
boxes, where things are working properly.
Just to be sure, it's really grub? You get a somewhat blueish screen that
I should probably add this big mea culpa:
I just had my first experience working in Ubuntu, and, despite my
previous experiences with Alpha Linux 1.x and SuSE 10.1, I am
astounded by the depth of differences between different distros.
So, to the person who pointed out that this was way more than
Others have given you good answers, but I felt I could share some
insight on the matter..
The MAC address of a NIC is used by switches to send packets out the
right port - As soon as you add a routing element, all traffic to a
routed IP appears to be destined for the router, if one goes by
Lanny Marcus wrote on Wed, 07 May 2008 15:10:58 -0500:
> Kai: I am not using Windows Boot Manager. Grub comes up, as on the 2
> boxes, where things are working properly.
Just to be sure, it's really grub? You get a somewhat blueish screen that
says "booting centos in x seconds, press any key to
mail.gmail.com>
X-Rcpt-To:
Mhr wrote on Wed, 7 May 2008 14:04:55 -0700:
> Not being familiar with 'locate,' I found its man page rather
> intimidating at first glance. I'll have to study it a little more
> carefully, but I should also note that I ran locate to find my kernel
> rpms and was unsu
Tom Brown wrote:
In CentOS 4 does anyone know the switches to get NMAP to reveal the MAC
of the host being scanned ?
Others have given you good answers, but I felt I could share some
insight on the matter..
The MAC address of a NIC is used by switches to send packets out the
right port - As
On Wed, May 7, 2008 at 3:27 AM, <[EMAIL PROTECTED]> wrote:
>
> Yes. I woke up about 430 this morning and I realized that rpm can
> locate the file by itself. :-)However, I want to learn how to
> use find that Mark (mhr) mentioned!
>
Lanny (offlist):
Thanks - I really did mean that in a
On Wed, May 7, 2008 at 12:38 PM, Kai Schaetzl <[EMAIL PROTECTED]> wrote:
>
> I would always use locate for that task, much faster, much easier.
>
Not being familiar with 'locate,' I found its man page rather
intimidating at first glance. I'll have to study it a little more
carefully, but I shoul
On Wed, 7 May 2008 at 9:57pm, Kay Diederichs wrote
the statistics package R (www.r-project.org) was available for CentOS-4, but
I need it for CentOS-5 (64bit). RPMforge has R-2.5.1 for CentOS-4, so I
thought I'd try to install that on CentOS-5.
However, yum complains about missing ggv, and th
On Wed, 2008-05-07 at 21:38 +0200, Kai Schaetzl wrote:
> Lanny Marcus wrote on Wed, 07 May 2008 13:13:13 -0500:
>
> > On
> > compaq1300, I do *not* have the three boot options (original kernel,
> > latest kernel and Windows XP). I have two (2) options, if I interrupt
> > grub: (a) the original ke
Dear all,
the statistics package R (www.r-project.org) was available for CentOS-4, but I
need it for CentOS-5 (64bit). RPMforge has R-2.5.1 for CentOS-4, so I thought
I'd try to install that on CentOS-5.
However, yum complains about missing ggv, and the specfile indeed says that R
requires g
On Wed, 7 May 2008, James Bunnell wrote:
What are the requirements to get a Centos IRC cloak in
freenode? Thanks in advance.
As of the last discussion by the centos group of developers,
IRC cloaks were not something that was going to be generally
'purchasable' by way of a donation, as if som
> [encijan ~]$ rpm -qf /usr/bin/dirsplit
> genisoimage-1.1.6-6.fc8
> Then use growisofs.
> I can send you dirsplit-0.3.1-1.bob.src.rpm if you wish.
Yes please, that would be useful.
--
/\oo/\
/ /()\ \ David Mackintosh |
[EMAIL PROTECTED] | http://www.xdroop.com
pgpNRUgefVh2F.pgp
De
Lanny Marcus wrote on Wed, 07 May 2008 13:13:13 -0500:
> On
> compaq1300, I do *not* have the three boot options (original kernel,
> latest kernel and Windows XP). I have two (2) options, if I interrupt
> grub: (a) the original kernel (b) other, which is Windows XP
Ok, that explains it. I bet yo
Mhr wrote on Wed, 7 May 2008 09:53:23 -0700:
> Beauty is in the eye of the beholder. I have never found this
> particular man page to be bad enough not to consult when needed, even
> for the first time (like I did, lo these many eons ago, when it was
> even harder to read than now) and the effort
Karanbir Singh wrote:
Sam Drinkard wrote:
Can someone tell me the latest version of clamav-milter x84_64? I
just yum installed it but it is version 0.88.2.el4kb, and the version
on my server is 0.93. Is the difference between the two due to being
different platforms?
the ClamAV in rpm
Sam Drinkard wrote:
Looks like I shot myself in the foot after all. I just checked the bold
foreground color, and sure enough, it was the same as the background
color. Changed that to red, and it works as advertized now. Sorry for
the unnecessary postings. Should have checked there first
Sam Drinkard wrote on Wed, 07 May 2008 14:28:55 -0400:
> Is this perhaps caused by the wrong terminal setting in
> putty
probably
> or is there something with Centos man pages that cause this to happen?
works fine here.
Kai
--
Kai Schätzl, Berlin, Germany
Get your web at Conactive Internet
On Wed, May 07, 2008 at 02:28:55PM -0400, Sam Drinkard wrote:
> Hi again,
>
>I've got a nagging irritant with either putty or the man pages, or
> perhaps my setup. If I use putty to log into my server and request any
> man page, it returns the page, but really important stuff like keywords
Gregory P. Ennis wrote:
Sam,
Are you using putty from a microsoft desktop or a linux desktop? If you
are using a linux desktop try using konsole or terminal for the
connection and see if you get the same symptoms.
We use putty for all of our microsoft connections and konsole for all of
our l
Gregory P. Ennis wrote:
Sam,
Are you using putty from a microsoft desktop or a linux desktop? If you
are using a linux desktop try using konsole or terminal for the
connection and see if you get the same symptoms.
We use putty for all of our microsoft connections and konsole for all of
our l
On Wed, May 7, 2008 at 1:28 PM, Sam Drinkard <[EMAIL PROTECTED]> wrote:
> Hi again,
>
>I've got a nagging irritant with either putty or the man pages, or
> perhaps my setup. If I use putty to log into my server and request any man
> page, it returns the page, but really important stuff like ke
Sam Drinkard wrote:
Can someone tell me the latest version of clamav-milter x84_64? I
just yum installed it but it is version 0.88.2.el4kb, and the version on
my server is 0.93. Is the difference between the two due to being
different platforms?
the ClamAV in rpmforge obsolets the one in
Sam,
Are you using putty from a microsoft desktop or a linux desktop? If you
are using a linux desktop try using konsole or terminal for the
connection and see if you get the same symptoms.
We use putty for all of our microsoft connections and konsole for all of
our linux connections and I have
Hi again,
I've got a nagging irritant with either putty or the man pages, or
perhaps my setup. If I use putty to log into my server and request any
man page, it returns the page, but really important stuff like keywords
are blank. Is this perhaps caused by the wrong terminal setting in
p
Hi folks,
Can someone tell me the latest version of clamav-milter x84_64? I
just yum installed it but it is version 0.88.2.el4kb, and the version on
my server is 0.93. Is the difference between the two due to being
different platforms?
Thanks..
Sam
_
Tom Brown wrote:
In CentOS 4 does anyone know the switches to get NMAP to reveal the
MAC of the host being scanned ?
I cant seem to find it and i am using nmap-4.20 - i am sure this was
available somehow on older releases.
MAC address is only available on the same network segment... And, I'v
Well my question was rhetorical - ATrpms never replaced python
packages. Furthermore there have never been amavisd-new and friends on
ATrpms ever, so maybe you are confusing ATrpms and another repo?
It's certainly possible, my mistake, apologies for having mis-spoke.
On Wed, 2008-05-07 at 18:30 +0200, Kai Schaetzl wrote:
> -rw--- 1 root root816 May 7 05:08 grub.conf
>
> got changed 5:08 today. Are you sure you booted after that? What does uname
> -a show now?
Kai: Yes, I rebooted, very early this morning. I just tried it again. My
wife had been using
On May 2, 2008, at 17:24, Ross S. W. Walker wrote:
Sure you can do all this from rescue mode off the first CD.
Boot the cd type in 'linux rescue' and continue to the command prompt.
First, thanks for the detailed list, Ross. It was very helpful. I
was able to rename both the VG and the LVs
What are the requirements to get a Centos IRC cloak in freenode? Thanks
in advance.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Tom Brown wrote:
In CentOS 4 does anyone know the switches to get NMAP to reveal the
MAC of the host being scanned ?
I cant seem to find it and i am using nmap-4.20 - i am sure this was
available somehow on older releases.
thanks
___
CentOS mailin
On Wed, May 07, 2008 at 10:38:55AM -0700, [EMAIL PROTECTED] wrote:
> Axel Thimm wrote:
>> On Wed, May 07, 2008 at 07:54:11AM -0700, [EMAIL PROTECTED] wrote:
>>
>>> I've recently started using the priorities plugin as part of my best
>>> practices. It's very effective, and prevents nasty things
Axel Thimm wrote:
On Wed, May 07, 2008 at 07:54:11AM -0700, [EMAIL PROTECTED] wrote:
I've recently started using the priorities plugin as part of my best
practices. It's very effective, and prevents nasty things from
happening (like atrpms upgrading python and disabling yum.)
When did
On Wed, May 07, 2008 at 07:54:11AM -0700, [EMAIL PROTECTED] wrote:
> I've recently started using the priorities plugin as part of my best
> practices. It's very effective, and prevents nasty things from
> happening (like atrpms upgrading python and disabling yum.)
When did ATrpms replace python a
Everyone,
I have a new installation of Centos 5.1 that I am using on a gateway
server that also has dhcp, named servers. I also have cups set up to
function as a print server, and sendmail is being used as a relay to our
mail server. yum-cron appears to be updating everything daily as
desired.
On Wed, May 7, 2008 at 12:32 AM, Ralph Angenendt <[EMAIL PROTECTED]> wrote:
>
> Erm. "man find" is one of the most hideous manual pages on a linux
> system (man tar comes close) - so a bit help from your side would have
> been nice.
>
Beauty is in the eye of the beholder. I have never found thi
Sorry I don't have the answer off hand, but it might be as simple as
increasing the level of verbosity. Another option is the 'arp' command, at
least if the host is on the same network.
Mike
On Wed, May 7, 2008 at 12:07 PM, Tom Brown <[EMAIL PROTECTED]> wrote:
> In CentOS 4 does anyone know the
wrote on Wed, 7 May 2008 08:53:01 -0500:
> -rw--- 1 root root816 May 7 05:08 grub.conf
got changed 5:08 today. Are you sure you booted after that? What does uname
-a show now?
> default=0
> timeout=5
> splashimage=(hd0,2)/grub/splash.xpm.gz
> hiddenmenu
> title CentOS (2.6.18-53.1.14.
In CentOS 4 does anyone know the switches to get NMAP to reveal the MAC
of the host being scanned ?
I cant seem to find it and i am using nmap-4.20 - i am sure this was
available somehow on older releases.
thanks
___
CentOS mailing list
CentOS@cent
Matt Hyclak wrote:
On Wed, May 07, 2008 at 07:54:11AM -0700, [EMAIL PROTECTED] enlightened us:
I've recently started using the priorities plugin as part of my best
practices. It's very effective, and prevents nasty things from
happening (like atrpms upgrading python and disabling yum.)
I'm
On Wed, May 07, 2008 at 07:54:11AM -0700, [EMAIL PROTECTED] enlightened us:
> I've recently started using the priorities plugin as part of my best
> practices. It's very effective, and prevents nasty things from
> happening (like atrpms upgrading python and disabling yum.)
>
> I'm wondering if th
Hello all!
I've recently started using the priorities plugin as part of my best
practices. It's very effective, and prevents nasty things from
happening (like atrpms upgrading python and disabling yum.)
I'm wondering if there's a simple and elegant way to allow
package-name-based exclusions. F
On 5/7/08, Kai Schaetzl <[EMAIL PROTECTED]> wrote:
> wrote on Wed, 7 May 2008 05:27:25 -0500:
> > I just installed kernel-headers-2.6.18-53.1.14.el5 again. Was that
> > correct or not?
>
> As you removed it earlier, yes. There doesn't seem to be any dependancy
> for it. AFAIK it's not necessary fo
On 5/7/08, Robert Nichols <[EMAIL PROTECTED]> wrote:
> Michael Simpson wrote:
>
> > do you have any mention of the new kernel in /etc/grub.conf?
> >
> > you might find that the default kernel is still the original one in
> > which case there would be a line like
> > default=1 in grub.conf
> > chang
It appears as I have VSFTPD allowing access authenticating to my LDAP server
correctly. I did this by configuring my server to authenticate to my LDAP
server from the GUI using System -> Administration -> Authentication. However
now when I look at /var/log/secure it says authentication failure.
Michael Simpson wrote:
do you have any mention of the new kernel in /etc/grub.conf?
you might find that the default kernel is still the original one in
which case there would be a line like
default=1 in grub.conf
changing this to default=0 might bring up the new kernel on reboot
i have an old d
Michael Simpson wrote on Wed, 7 May 2008 12:15:35 +0100:
> do you have any mention of the new kernel in /etc/grub.conf?
Note, this is only a symlink to /boot/grub/grub.conf !
Kai
--
Kai Schätzl, Berlin, Germany
Get your web at Conactive Internet Services: http://www.conactive.com
__
wrote on Wed, 7 May 2008 05:27:25 -0500:
> I just installed kernel-headers-2.6.18-53.1.14.el5 again. Was that
> correct or not?
As you removed it earlier, yes. There doesn't seem to be any dependancy
for it. AFAIK it's not necessary for operation, anyway, it's only
necessary if something has t
David Hláèik wrote on Wed, 7 May 2008 11:07:10 +0200:
> Hi, how can i make actual xen kernel to work under my domU virtual machines?
There is nothing special. Just install CentOS host with virtualization support
and then install your first DomU with virt-install or virt-manager. There's a
CentO
> [EMAIL PROTECTED] ~]$ uname -a
> Linux compaq1300.HOMELAN 2.6.18-8.el5 #1 SMP Thu Mar 15 19:57:35 EDT
> 2007 i686 i686 i386 GNU/Linux
> [EMAIL PROTECTED] ~]$
>
> After rebooting the box, it is still on the original kernel, rather
> than on the new kernel.
>
> I just installed kernel-headers-2.6.1
On 5/7/08, Ralph Angenendt wrote:
> Lanny Marcus wrote:
> > Scott: Great! If I can locate kernel-headers-2.6.18-53.1.14.el5 and
> > kernel-2.6.18-53.1.14.el5 I can use the rpm -e command to remove them
> > and then yum update again and that should update the kernel in her box.
> > How do I locate
Hi, how can i make actual xen kernel to work under my domU virtual machines?
When i will provide as kernel /boot/vmlinuz-2.6.18-53.1.14.el5xen as ramdisk
/boot/initrd-2.6.18-53.1.14.el5xen.img , it will not work becouse of error
that root device does not exists. And when it is booting it is showin
On Wednesday 07 May 2008 14:03:42 Victor Padro wrote:
> Hello all,
>
> I am kinda new to Linux, FreeBSD...most Windows user, anyway.
> I got a little problem here maybe you can help me solve it.
>
> I just bought a new 500Gb HDD which i formated using ext3 under Centos 5,
> my plan was to use it un
MHR wrote:
> On Tue, May 6, 2008 at 6:32 PM, Lanny Marcus <[EMAIL PROTECTED]> wrote:
> > On Tue, 2008-05-06 at 15:48 -0700, MHR wrote:
> >
> >
> > > As root, go to the directory where the rpms are located (you can use
> > > 'find' for this if you don't alreayd know) and run:
> > Mark: Syntax fo
MHR wrote:
> On Tue, May 6, 2008 at 2:49 PM, <[EMAIL PROTECTED]> wrote:
> >
> > [EMAIL PROTECTED] ~]$ rpm -qa kernel*
> > kernel-headers-2.6.18-53.1.14.el5
> > kernel-2.6.18-8.el5
> > kernel-2.6.18-53.1.14.el5
> >
> > How can I correct this, so the box
> > will boot the latest kernel? TIA! L
Lanny Marcus wrote:
> Scott: Great! If I can locate kernel-headers-2.6.18-53.1.14.el5 and
> kernel-2.6.18-53.1.14.el5 I can use the rpm -e command to remove them
> and then yum update again and that should update the kernel in her box.
> How do I locate them?
Why locate them? rpm -e takes the pac
Hello all,
I am kinda new to Linux, FreeBSD...most Windows user, anyway.
I got a little problem here maybe you can help me solve it.
I just bought a new 500Gb HDD which i formated using ext3 under Centos 5, my
plan was to use it under FreeNAS as another Backup File Disk(It has already
like 400gb
62 matches
Mail list logo
