Saludos hermanos.
Solucionado
Fue una torpeza mia, tenia comentado el parametro logon script.
Esto de andar Borracho..
No cojas lucha. A cualquiera le pasa eso.
Gracias a todos que se tomaron la molestia de leer el correo. Y para
redimirme aqui dejo unos
Compañeros buenos dias.
Deseo montar un Raid1 por software en un servidor HP ML150, en el momento
tengo 2 D.D de 250 Gb sata, ya instale Centos 5.1 en el primer D.D, el
segundo no le he hecho particiones, he busacado y he leido informacion sobre
Raid con software, pero no he podido lograr
Muchas gracias.
2008/7/28 Victor Padro [EMAIL PROTECTED]
yo tengo este enlace pero esta en ingles, lo unico seria que entraras a el
wiki de centos y buscaras la version en español en los manuales.
http://www.centos.org/docs/4/html/rhel-sag-en-4/ch-software-raid.html
a mi me ha servido
Hi ALL
#!/bin/sh
# Shell script to monitor or watch the disk space
# It will send an email to $ADMIN, if the (free avilable) percentage
# of space is = 90%
# -
# Copyright (c) 2005 nixCraft project http://cyberciti.biz/fb/
#
Mad Unix wrote:
...
df -H | grep -vE '^Filesystem|tmpfs|cdrom' | awk '{ print $5 $1 }' |
Try changing df -H into df -H -P
Mogens
--
Mogens Kjaer, Carlsberg A/S, Computer Department
Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark
Phone: +45 33 27 53 25, Fax: +45 33 27 47 08
Email: [EMAIL
Now at IETF at IPSECme session and connected again
Rainer Duffner wrote:
Am 27.07.2008 um 16:36 schrieb Robert Moskowitz:
Oh, Boy. I am in trouble now
I just installed Centos on a USB drive on my corp notebook. To not
TOUCH my corp drive.
I spent time with the drive partitioner
D Steward wrote:
Well I missed something and I overwrote the encrypted bootloader on the
hard drive.
If the purpose of the encrypted bootloader was to load an encrypted
filesystem/s, then there must be a spare MBR on your drive somewhere.
Its not standard to have more than one MBR, but my
Ian jonhson wrote:
BTW, the patched kernel by PF_RING is version 2.6.25.3.
I do not have anything that new in testing .. however we do have this,
which you might try to see if it still happens:
http://people.centos.org/hughesjr/kernel-rt/
Dell might also have modules posted for this
Speaking of that, is there some way to move the grub bootloader to that
USB drive so at least I don't have to rebuild that drive too?
Why, won't dd work?
dd if=/dev/sda of=/dev/sdb bs=512 count=1
is the usual command
But if you're booting from the USB stick, I think that sda and sdb will
be
hi,
how to write a scripts which launches 10 pings to different
destinations at execution of single shell scripts
please help me any ideas
regards,
Gopinath
___
CentOS mailing list
CentOS@centos.org
Ah sorry, you meant bootloader not MBR.
You'll probably have to reinstall grub.
Have you been using this guide?
http://www.ubuntugeek.com/a-much-easier-way-to-install-ubuntu-on-a-usb-device-stick-or-hd.html
___
CentOS mailing list
CentOS@centos.org
Gopinath Achari wrote:
hi,
how to write a scripts which launches 10 pings to different
destinations at execution of single shell scripts
please help me any ideas
regards,
Gopinath
Do you mean something like:
ping -c10 host1
ping -c10 host2
which will ping host1 10 times,
Hi,
If you you want a quicker execution - you could also run the pings to
separate hosts in parallel starting the jobs in background () and waiting
for them with wait after that. You'll have to be more careful about the
outputs in that case - e.g. redirect them to separate files.
Regards,
Javor
Craig White wrote:
On Fri, 2008-07-25 at 10:36 -0400, Toby Bluhm wrote:
Ian Blackwell wrote:
Craig White wrote:
Suggest that you make sure you are fully updated, then
'touch /.autorelabel' then reboot (reboot at a time you choose because
it may take a long time to relabel every file on your
Rudi Ahlers wrote:
Ross S. W. Walker wrote:
Rudi Ahlers wrote:
Ross S. W. Walker wrote:
Rudi Ahlers wrote:
Hi all
I'm looking at setting up software RAID 10, using CentOS 5.1 x64 - what
is the best way todo this?
I'm reading some sources on the internet, and get a lot
Rudi Ahlers wrote:
Ross S. W. Walker wrote:
Kai Schaetzl wrote:
Rudi Ahlers wrote on Thu, 17 Jul 2008 23:10:48 +0200:
/boot shouldn't be mirrored, as the BIOS won't know how to boot it.
leave /dev/sdb1 the same size as /dev/sda1 and call it /boot2 and try
to remember to copy
On Sun, Jul 27, 2008 at 4:57 PM, MHR [EMAIL PROTECTED] wrote:
On Sat, Jul 26, 2008 at 12:59 PM, Lanny Marcus [EMAIL PROTECTED] wrote:
Good luck with that! Have you tried it on a VMWare Server?
No, why would I do that?
I uninstalled nspluginwrapper and mplayerplug-in reinstalled the
64-bit
On Mon, 2008-07-28 at 09:24 -0400, Toby Bluhm wrote:
Sometimes labeling problems can cause SELinux denials. You could try to
restore
the default system file context for ./kernel,
restorecon -v './kernel'
did you try this?
If this does not work, there is currently no automatic
On Mon, 2008-07-28 at 09:24 -0400, Toby Bluhm wrote:
Summary:
SELinux is preventing clamd (clamd_t) read to ./daily.cld (var_t).
Detailed Description:
[SELinux is in permissive mode, the operation would have been denied
but was
permitted due to permissive mode.]
SELinux denied
On Mon, Jul 28, 2008, Gopinath Achari wrote:
hi,
how to write a scripts which launches 10 pings to different
destinations at execution of single shell scripts
please help me any ideas
If your goal is to test connectivity, you might look at the perl
Net::Ping module. ``perldoc
On Mon, 2008-07-28 at 09:24 -0400, Toby Bluhm wrote:
SO - is it normal to have to update policies on basic services? Am I
missing an rpm?
those aren't basic services but are packages that are supplied by
postfix is centos, the rest are from rpmforge
repositories other than
I have never been able to get cups to work properly since CentOS 4.x
(and am now on 5.2).
When I try to service start cups, cupsd immediately starts taking 100%
of the cpu. Attaching strace to it shows no system calls happening. I
have tried uninstalling and reinstalling cups to get fresh
I really like 'fping' for use in shell scripts. See:
http://www.fping.com/ and http://fping.sourceforge.net/man/
It can be 'yum installed' from the CentOS RPMforge repo.
So in your script you can just do
fping -c 10 dest1 dest2 ... destN
I don't understand exactly what 'scripts which launches
Hello,
have you installed fresh centos 5.2 or upgraded it from previous one ?
it creates a problem in some services if any one upgrading the OS from old
version to new version.
well according to my opinion you should uninstall cupsd with their
dependencies and reinstall it.
well i am also
snip
Does swap need to be part of the RAID set? Is there actually a
performance boost?
Not a performance boost, but if the drive that swap is on fails while the OS
has data there the system can choke horribly or even die. Swap on raid can
sometimes be slightly slower. If you think your
On Mon, Jul 28, 2008 at 11:05 AM, Dan Halbert [EMAIL PROTECTED] wrote:
I have never been able to get cups to work properly since CentOS 4.x (and am
now on 5.2).
When I try to service start cups, cupsd immediately starts taking 100% of
the cpu. Attaching strace to it shows no system calls
Scott Silva wrote:
snip
Does swap need to be part of the RAID set? Is there actually a
performance boost?
Not a performance boost, but if the drive that swap is on fails while the OS
has data there the system can choke horribly or even die. Swap on raid can
sometimes be slightly
Bill Campbell escribió:
On Mon, Jul 28, 2008, Gopinath Achari wrote:
hi,
how to write a scripts which launches 10 pings to different
destinations at execution of single shell scripts
please help me any ideas
If your goal is to test connectivity, you might look at the
on 7-26-2008 1:05 PM Lanny Marcus spake the following:
On Fri, Jul 25, 2008 at 10:51 AM, Scott Silva ssilva-m4n3GYAQT2lWk0Htik3J/[EMAIL
PROTECTED] wrote:
on 7-24-2008 5:36 PM Lanny Marcus spake the following:
snip
At work, you
do the reboot at 3 A.M. or you have users who are furious, or
Hello,
This is a running shell script for ping multiple host it provides result
directly:
if host is successfully ping then it returns Host is alive. otherwise Host
is not alive
Try this i am working with that in my local n/w.
#/bin/bash
for n in {1..5};
do
host=192.168.1.$n
ping -c2 $host
on 7-26-2008 9:54 AM Mag Gam spake the following:
Thankyou everyone. I updated the 5.2 kernel onto 5.1 and everything
seems to work fine.
Thanks for all of your help and wisdom.
You still are at risk by not updating. The kernels are a small part of the
security updates that came in 5.2.
I choose CentOS because I believe it is the most stable OS in
commodity machines.
But I don't know how to do when facing the trouble.
The difference lies in that I patched a PF_RING patch in original
kernel and recompiled
the kernel to run my machines. I wonder whether the patched kernel
Hello,
My hardware (?) RAID system seems to work but says duplicate PV while
booting, I don't think I was reading them before. Any clues will be
appreciated.
From what I recall:
1) RAID 1 was setup (using firmware setup program) on a machine with Intel
S3200 SHV Server Board.
2) Installed Centos
Eduardo Grosclaude wrote:
Hello,
My hardware (?) RAID system seems to work but says
duplicate PV while booting, I don't think I was reading
them before. Any clues will be appreciated.
From what I recall:
1) RAID 1 was setup (using firmware setup program) on a
machine with Intel S3200
Eduardo Grosclaude wrote:
4) Rebooted the installed system. Now Duplicate PV shows at boot. Honestly
To me it sounds likely that the raid controller is shitty and
is presenting two sets of devices to the OS, one likely being
the RAID device and the other a more generic device(s).
What does
Craig White wrote:
On Mon, 2008-07-28 at 09:24 -0400, Toby Bluhm wrote:
I just want to point out that the issue isn't with postfix but rather
amavisd and how/where amavisd connects/communicates with the various
parts and pieces.
I'm afraid that I can't be too much help here because I
On Mon, Jul 28, 2008 at 10:00 AM, Lanny Marcus [EMAIL PROTECTED] wrote:
Is that a problem with the 64 bit version of CUPS? There is no problem
with the 32 bit version of CUPS. I have it
running on my desktop, without any problems. And, it runs on GNOME
without any problems. Will the 32 bit
Hey,
lsof -p 2232 and show the output.
---
Eduardo Silvestre
nfsi telecom, lda.
[EMAIL PROTECTED]
Tel. (+351) 21 949 2300 - Fax (+351) 21 949 2301
http://www.nfsi.pt/
- Original Message -
From: MHR [EMAIL PROTECTED]
To: CentOS mailing list centos@centos.org
Sent: Monday, July 28,
Ross S. W. Walker wrote:
Eduardo Grosclaude wrote:
Hello,
My hardware (?) RAID system seems to work but says
duplicate PV while booting, I don't think I was reading
Could just be that lvm is finding your pv through another path -
lvm.conf can be setup to only scan specific devices.
Tony,
1) Please edit your replies to remove unnecessary information.
2) If you need to present this large of an amount of data, please
include it in an attachment.
Thanks.
mhr
___
CentOS mailing list
CentOS@centos.org
Toby Bluhm wrote:
Ross S. W. Walker wrote:
Eduardo Grosclaude wrote:
Hello, My hardware (?) RAID system seems to work but says
Never mind, mdadm don't apply with HW raid.
mdadm --examine pv device(s) will tell if there's raid metadata there,
--zero-superblock will erase it.
--
on 7-27-2008 7:14 PM D Steward spake the following:
Well I missed something and I overwrote the encrypted bootloader on the
hard drive.
If the purpose of the encrypted bootloader was to load an encrypted
filesystem/s, then there must be a spare MBR on your drive somewhere.
Its not standard to
Over the weekend, I had to make a technical support call on one of my
DVD burners, and at one point the recorded message mentioned I should
have my serial number handy. I thought there was a way to read that
from at least one piece of software on the system, but I couldn't
remember one and man -k
MHR wrote:
Tony,
1) Please edit your replies to remove unnecessary information.
2) If you need to present this large of an amount of data, please
include it in an attachment.
Thanks.
I was waiting for you :)
BTW - my name is Toby.
--
Toby Bluhm
Alltech Medical Systems America, Inc.
Toby Bluhm wrote:
Toby Bluhm wrote:
Ross S. W. Walker wrote:
Eduardo Grosclaude wrote:
Hello, My hardware (?) RAID system seems to work but says
Never mind, mdadm don't apply with HW raid.
Ah, but it would if a hardware RAID1 mirror were broken, a new
disk stuck in, then later the
Ross, Nate, Tony, thanks for your promptly response
On Mon, Jul 28, 2008 at 2:51 PM, nate [EMAIL PROTECTED] wrote:
Eduardo Grosclaude wrote:
4) Rebooted the installed system. Now Duplicate PV shows at boot.
Honestly
To me it sounds likely that the raid controller is shitty and
is
Rainer Duffner wrote on Mon, 28 Jul 2008 00:22:03 +0200:
For HP, you should get the data if you install the Insight Manager
agents.
I didn't install any software from HP on the HP machine. After half-an-
hour searching on the site I finally found an hpasm package that seems
to be it. They
on 7-27-2008 10:19 PM Ian jonhson spake the following:
Hi all,
The PF_RING seems not to work smoothly in CentOS 5.
Several day before, I patched the kernel 2.6.25.3 and
installed the PF_RING-patched kernel in my CentOS5.
Based on the PF_RING, I developed my program to capture
the network
On Mon, Jul 28, 2008 at 11:26:30AM -0700, MHR wrote:
Over the weekend, I had to make a technical support call on one of my
DVD burners, and at one point the recorded message mentioned I should
have my serial number handy. I thought there was a way to read that
from at least one piece of
On Mon, Jul 28, 2008 at 11:26 AM, Toby Bluhm [EMAIL PROTECTED] wrote:
I was waiting for you :)
I knew it! Furses! Coiled again!
BTW - my name is Toby.
Then I wasn't talking to you! Either that, or it was a typo - the n
and the b are right next to each other on my keyboard, and I do that
Eduardo Grosclaude wrote:
Ross, Nate, Tony, thanks for your promptly response
Toby
On Mon, Jul 28, 2008 at 2:51 PM, nate [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Eduardo Grosclaude wrote:
snip
Oops... system-config-lvm shows under 'Uninitialized entities':
/dev/sda
On Mon, Jul 28, 2008 at 12:08 PM, Scott Silva [EMAIL PROTECTED] wrote:
snip
I usually have to do updates like that on the weekends, as I can't depend
on
a 3AM reboot to be up in the morning when Exec's are in. A reboot I
trust,
but not the first one after a kernel change. On a weekend I can
On Mon, Jul 28, 2008 at 11:31 AM, Kai Schaetzl [EMAIL PROTECTED] wrote:
I didn't install any software from HP on the HP machine. After half-an-
hour searching on the site I finally found an hpasm package that seems
to be it. They make it really hard to find it as it doesn't appear when
On Mon, Jul 28, 2008 at 3:36 PM, Toby Bluhm [EMAIL PROTECTED]wrote:
Eduardo Grosclaude wrote:
Ross, Nate, Tony, thanks for your promptly response
Toby
Ouch! Excuse me plz
If it were me I was just starting out on a new setup, I'd blow it all away
and start from scratch. I hate that
On Mon, Jul 28, 2008 at 11:34 AM, Stephen Harris [EMAIL PROTECTED] wrote:
On a Dell, dmidecode will give you the serial number of the system.
(I can see motherboard, chasis, memory sticks on my machine).
I did that. The only item of real interest (i.e., surprise) was that
the CPU was listed
Hi i have an old account on a pop3 server... i don't use for a long
time...but i want to receive the emails from there sometimes...
but i have a problem...this email has a lot of spam emails...
I wish to know if there's a way to check all the emails and those
emails that match at spamhaus or
On Mon, Jul 28, 2008 at 1:31 PM, Kai Schaetzl [EMAIL PROTECTED] wrote:
Rainer Duffner wrote on Mon, 28 Jul 2008 00:22:03 +0200:
For HP, you should get the data if you install the Insight Manager
agents.
I didn't install any software from HP on the HP machine. After half-an-
hour searching
MHR wrote:
Tony,
1) Please edit your replies to remove unnecessary information.
2) If you need to present this large of an amount of data, please
include it in an attachment.
Maybe that would have broken the list limit ...
53k * several thousand mails ...
Cheers,
Ralph
On Mon, 28 Jul 2008 11:26:30 -0700
MHR [EMAIL PROTECTED] took out a #2 pencil and scribbled:
Over the weekend, I had to make a technical support call on one
of my DVD burners, and at one point the recorded message
mentioned I should have my serial number handy. I thought there
was a way to
On Mon, Jul 28, 2008 at 1:26 PM, MHR [EMAIL PROTECTED] wrote:
Over the weekend, I had to make a technical support call on one of my
DVD burners, and at one point the recorded message mentioned I should
have my serial number handy. I thought there was a way to read that
from at least one piece
On Mon, Jul 28, 2008 at 1:26 PM, MHR [EMAIL PROTECTED] wrote:
Over the weekend, I had to make a technical support call on one of my
DVD burners, and at one point the recorded message mentioned I should
have my serial number handy. I thought there was a way to read that
from at least one piece
MHR wrote:
Over the weekend, I had to make a technical support call on one of my
DVD burners, and at one point the recorded message mentioned I should
have my serial number handy. I thought there was a way to read that
from at least one piece of software on the system, but I couldn't
Lanny Marcus wrote:
Follow on: When I had a problem with the Teac CD-RW drive in my daughters box,
I sent an email to Teac Tech Support, asking if they had Diagnostics
for it. ...
DVD burners, at $39 or so new, are pretty much disposable. i find most
burners are good for a few 100 disks
On Mon, Jul 28, 2008 at 1:56 PM, Alex [EMAIL PROTECTED] wrote:
On Mon, 28 Jul 2008 11:26:30 -0700
MHR [EMAIL PROTECTED] took out a #2 pencil and scribbled:
Over the weekend, I had to make a technical support call on one
of my DVD burners, and at one point the recorded message
mentioned I
On Mon, Jul 28, 2008 at 11:51 AM, Ralph Angenendt
[EMAIL PROTECTED] wrote:
MHR wrote:
Tony,
1) Please edit your replies to remove unnecessary information.
2) If you need to present this large of an amount of data, please
include it in an attachment.
Maybe that would have broken the list
On Mon, Jul 28, 2008 at 11:59 AM, Lanny Marcus [EMAIL PROTECTED] wrote:
PITA. You will probably need to open the box and look at the label on
the drive.
I'll have to do that anyway - they said it was probably defective and
I should send it back for an exchange.
Foo.
mhr
On Mon, Jul 28, 2008 at 2:09 PM, John R Pierce [EMAIL PROTECTED] wrote:
Lanny Marcus wrote:
Follow on: When I had a problem with the Teac CD-RW drive in my daughters
box,
I sent an email to Teac Tech Support, asking if they had Diagnostics
for it. ...
DVD burners, at $39 or so new, are
On Mon, Jul 28, 2008 at 12:09 PM, John R Pierce [EMAIL PROTECTED] wrote:
DVD burners, at $39 or so new, are pretty much disposable. i find most
burners are good for a few 100 disks then become less reliable.
True, but it's still a PITA to install and remove them, and external
drives cost
Eduardo Grosclaude wrote:
On Mon, Jul 28, 2008 at 3:36 PM, Toby Bluhm
[EMAIL PROTECTED] wrote:
Eduardo Grosclaude wrote:
Ross, Nate, Tony, thanks for your promptly response
Toby
Ouch! Excuse me plz
If it were me I
Ralph Angenendt wrote:
MHR wrote:
Tony,
1) Please edit your replies to remove unnecessary information.
2) If you need to present this large of an amount of data, please
include it in an attachment.
Maybe that would have broken the list limit ...
Not sure of your meaning - by being 53k or
snip
Is there a recommended limit on email size posted somewhere?
1 byte less than what triggers a spanking! ;-P
--
MailScanner is like deodorant...
You hope everybody uses it, and
you notice quickly if they don't
signature.asc
Description: OpenPGP digital signature
/dev/sda is the virtual disk as it appears to CentOS as I can access it
with hdparm.
Do I need to use another device for the RAID array (which?) or is it
impossible to smart monitor thru a RAID controller?
You probably will want to install the HP Proliant Support Pack as it will
include the
Mad Unix wrote:
I suggest make it a little bit lighter:
inline corrections:
#!/bin/sh
# Shell script to monitor or watch the disk space
# It will send an email to $ADMIN, if the (free avilable) percentage
# of space is = 90%
#
snip
- unpartitioned space
These shouldn't be appearing as two discs in the first place-- but
anaconda said I only had one unit...
Anyway, why the asymmetry? Did I screw the RAID volume somehow? Or did I
install plain on sda and this RAID never worked as such? :P
The machine BIOS
on 7-28-2008 12:10 PM Lanny Marcus spake the following:
On Mon, Jul 28, 2008 at 1:56 PM, Alex [EMAIL PROTECTED] wrote:
On Mon, 28 Jul 2008 11:26:30 -0700
MHR [EMAIL PROTECTED] took out a #2 pencil and scribbled:
Over the weekend, I had to make a technical support call on one
of my DVD
Does sys-unconfig work as advertised in 4.x? Meaning that if I have a
fully configured box on my internal net and run sys-unconfig, will
I be able to power up the node on a totally different network
and have things work providing I answer the questions properly.
Most typically this will mean
Re-install with software RAID1.
RAID1 is cheap as far as CPU/IO time is concerned so it works
well software wise, and you get email alerts if it gets
degraded!
I agree with you re. CPU load, but what about hot-swap and auto
rebuilding of arrays?
Does software RAID give you this?
Thanks to all for the suggestions. I did do lsof on the process and saw
nothing interesting (just libraries). Attaching gdb to the process
showed that it appeared to be looping inside getservbyname().
However, after a little more thought, I rm -rfd /var/spool/cups/
(which had some stuff from
D Steward wrote:
Re-install with software RAID1.
RAID1 is cheap as far as CPU/IO time is concerned so it works
well software wise, and you get email alerts if it gets
degraded!
I agree with you re. CPU load, but what about hot-swap and auto
rebuilding of arrays? Does software RAID
Following up, info below.
On Tue, Jul 22, 2008, Bill Campbell wrote:
On Tue, Jul 22, 2008, Rudi Ahlers wrote:
Bill Campbell wrote:
On Mon, Jul 21, 2008, Jim Perrin wrote:
On Mon, Jul 21, 2008 at 9:20 PM, Bill Campbell [EMAIL PROTECTED] wrote:
Is there any reason why /etc/hosts would
on 7-28-2008 2:30 PM D Steward spake the following:
Re-install with software RAID1.
RAID1 is cheap as far as CPU/IO time is concerned so it works
well software wise, and you get email alerts if it gets
degraded!
I agree with you re. CPU load, but what about hot-swap and auto
rebuilding of
Scott Silva wrote:
on 7-28-2008 2:30 PM D Steward spake the following:
Re-install with software RAID1.
RAID1 is cheap as far as CPU/IO time is concerned so it works
well software wise, and you get email alerts if it gets
degraded!
I agree with you re. CPU load, but what about
Mhr wrote on Mon, 28 Jul 2008 11:41:17 -0700:
Or maybe it makes the machine feel good
Funny that you say that. Believe it or not, but after I found that hpasm
didn't provide any useful for me (at least at the moment) and I shut down
the daemon (with all of its agents) the core
Am 29.07.2008 um 00:31 schrieb Kai Schaetzl:
Mhr wrote on Mon, 28 Jul 2008 11:41:17 -0700:
Or maybe it makes the machine feel good
Funny that you say that. Believe it or not, but after I found that
hpasm
didn't provide any useful for me (at least at the moment) and I shut
down
the
Hey everyone,
This is the first time I've ever used a mailing-list so bear with me :-)
I've just got a new dedicated server from Hostik and they've installed
CentOS 5.2 on the system (awesome!) and came pre-installed with PHP, MySQL,
and Apache (among other things). I noticed that PHP version is
On Mon, Jul 28, 2008 at 4:16 PM, Justin [EMAIL PROTECTED] wrote:
Hey everyone,
This is the first time I've ever used a mailing-list so bear with me :-)
I've just got a new dedicated server from Hostik and they've installed
CentOS 5.2 on the system (awesome!) and came pre-installed with PHP,
on 7-28-2008 4:16 PM Justin spake the following:
Hey everyone,
This is the first time I've ever used a mailing-list so bear with me :-)
I've just got a new dedicated server from Hostik and they've installed
CentOS 5.2 on the system (awesome!) and came pre-installed with PHP,
MySQL, and
Is this the standard behavior? Is there a way to only update the
packages I installed without deselecting the ones I don't want?
Thanks.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
dmidecode should work in any Linux:
man dmidecode
DMIDECODE(8) DMIDECODE(8)
NAME
dmidecode - DMI table decoder
SYNOPSIS
dmidecode [OPTIONS]
DESCRIPTION
dmidecode is a tool for dumping a computer's DMI (some say
SMBIOS)
On Mon, Jul 28, 2008 at 5:08 PM, Mark Walker [EMAIL PROTECTED] wrote:
Is this the standard behavior? Is there a way to only update the packages I
installed without deselecting the ones I don't want?
That depends on what you are updating and what you want. Could you be
a little (no, a lot)
2008/7/28 thad [EMAIL PROTECTED]:
dmidecode should work in any Linux:
As was discussed earlier in this thread, dmidecode mainly reports on
motherboard components and does not address peripheral devices.
Also, please do not top post.
Thanks.
mhr
On Mon, Jul 28, 2008 at 6:39 AM, Brent L. Bates [EMAIL PROTECTED] wrote:
You might want to check out Scientific Linux:
https://www.scientificlinux.org/
They include a number of things that CentOS doesn't, like `R'. I don't know
if or how many of the other items you are
howdy,
did you tried lshw?
Regards,
---
Eduardo Silvestre
nfsi telecom, lda.
[EMAIL PROTECTED]
Tel. (+351) 21 949 2300 - Fax (+351) 21 949 2301
http://www.nfsi.pt/
- Original Message -
From: MHR [EMAIL PROTECTED]
To: CentOS mailing list centos@centos.org
Sent: Terça-feira, 29 de
On Mon, Jul 28, 2008 at 5:34 PM, Paul Johnson [EMAIL PROTECTED] wrote:
I tried Scientific Linux and found I had to re-build the same things
that I rebuild for CentOS, including R, because their versions lagged
behind the cutting edge. I switched to Centos hoping that the larger
user
Eduardo Silvestre wrote:
howdy,
did you tried lshw?
have you?
this package, available in rpmforge, shows considerably less than
hal-device did, albeit in a somewhat cleaner output format... ..
neither hal-device or lshw showed the serial of the optical devices on
the 3 different
On Mon, Jul 28, 2008 at 7:39 PM, MHR [EMAIL PROTECTED] wrote:
On Mon, Jul 28, 2008 at 5:34 PM, Paul Johnson [EMAIL PROTECTED] wrote:
I tried Scientific Linux and found I had to re-build the same things
that I rebuild for CentOS, including R, because their versions lagged
behind the cutting
Here's what I'm doing. In the gui environment, gnome, there's a box in
the upper right corner that reports about updates available every once
in a while. I click on it and I get something called Package Updater
that lists the packages that can be updated according to the server, I
believe
On Mon, Jul 28, 2008 at 6:16 PM, Justin [EMAIL PROTECTED] wrote:
I've just got a new dedicated server from Hostik and they've installed
CentOS 5.2 on the system (awesome!) and came pre-installed with PHP, MySQL,
and Apache (among other things). I noticed that PHP version is 5.1.6, the
MYSQL is
On Mon, Jul 28, 2008 at 4:20 PM, Scott Silva [EMAIL PROTECTED] wrote:
snip
MHR [EMAIL PROTECTED] took out a #2 pencil and scribbled:
Over the weekend, I had to make a technical support call on one
of my DVD burners, and at one point the recorded message
mentioned I should have my serial number
On Mon, Jul 28, 2008 at 7:58 PM, Mark Walker [EMAIL PROTECTED] wrote:
Here's what I'm doing. In the gui environment, gnome, there's a box in the
upper right corner that reports about updates available every once in a
while. I click on it and I get something called Package Updater that
lists
1 - 100 of 108 matches
Mail list logo
