[CentOS] mount CIFS issue with CentOS 6.4

I have a NAS that I can connect to just fine with a CentOS 6.3 box. But when I try the same exact command on my CentOS 6.4 box I get this error. mount -t cifs //xxx.xxx.xxx.xxx/mailserver/ /mnt/test -o username=xxx,password=xxx mount error(13): Permission denied Refer to the mount.cifs(8) manual p

Re: [CentOS] server fails to boot GRUB and flashing cursor

On 8/13/2012 4:07 PM, Les Mikesell wrote: > On Mon, Aug 13, 2012 at 2:41 PM, Dan Carl wrote: >>>> Device Boot Start End Blocks Id System >>>> /dev/sda1 * 1 13 104391 83 Linux >>>> /dev/sda2

Re: [CentOS] server fails to boot GRUB and flashing cursor

On 8/13/2012 2:24 PM, m.r...@5-cent.us wrote: > Dan Carl wrote: >> I have a power edge with raid5 that contains Centos 5.4. >> I had a drive failure, anyway the array is optimal now but the server >> won't boot. >> I can boot from a Centos 5.3 liveCD and all the dat

[CentOS] server fails to boot GRUB and flashing cursor

evice Boot Start End Blocks Id System /dev/sda1 * 1 13 104391 83 Linux /dev/sda2 14 658 5180962+ 82 Linux swap / Solaris /dev/sda3 659884265737980 83 Linux -- Dan Carl 651-766-2800 x218 65

Re: [CentOS] OT: high static in server room

On 6/14/2011 7:04 PM, Fajar Priyanto wrote: > Thanks all for the reply. > What is the worst thing can happen from excessive static? > We have two corrupted UEFI when we reboot servers which now I suspect > because of static. > Yesterday I actually saw a spark when I put a memory module on > motherb

Re: [CentOS] OT: Video Surveillance SW on CentOS

On 5/17/2011 8:33 AM, Lanny Marcus wrote: > I suggested to our Homeowners Association that we begin a Private > Forum (phpBB) and web site. That suggestion has been well received and > we will proceed with that. > > Now, I have become involved in a much more complex and important > project, which i

Re: [CentOS] Sendmail Replay problem

On 12/16/2010 2:56 AM, sync wrote: > Hi , guys : > > > I have a problem about the sendmail replay . The following is my > condition: > > I have installed the sendmail server on my laptop which installed > CentOS 5.5 x86 64, > and I want to set up the sendmail replay. > > > That is to say . If my

Re: [CentOS] Web statistics - w3perl

On 11/4/2010 8:03 AM, Mathew S. McCarrell wrote: > On Thu, Nov 4, 2010 at 7:45 AM, Lanny Marcus > wrote: > > On Wed, Oct 13, 2010 at 2:15 PM, Camron W. Fox > mailto:cw...@us.fujitsu.com>> wrote: > > On 10/10/13 08:12, Jussi Hirvi wrote: > >> I am co

Re: [CentOS] How to access one machine behind iptables, on different subnet?

On 10/29/2010 3:22 AM, Rudi Ahlers wrote: > Hi all, > > I wonder if someone can help me with this: The setup is as follows: > > 192.168.1.254 - wireless ADSL modem, with DHCP pool on 192.168.100 - > 192.168.200 > 192.168.1.250 - Linux firewall RED interface > 192.168.2.250 - Linux firewall GREEN i

Re: [CentOS] Backing up pass words

On 8/26/2010 12:40 PM, Todd Cary wrote: >I am currently running CentOS 4 and want to install CentOS 5. > To do that, I plan to install a new HD in my server box onto > which CentOS will be installed. I will then copy the "home" > directory from the old drive or from a backup on a USB drive, >

Re: [CentOS] Ethernet Quad

On 8/12/2010 7:56 AM, Daniel Bruno wrote: > Hello, > > Someone can indicate some Ethernet device Quad 10/100 to use with CentOS 5.x? > > > Thanks, > I use an Intel Pro 10/100 board on a CentOS 5.5 based router works quite well. I've been using it since RH 7.2 so its well supported under CentO

Re: [CentOS] cameras and CentOS

On 6/17/2010 1:22 AM, Jobst Schmalenbach wrote: > Hi > > I want to put up a few cameras connected to a CentOS box. > I currently have a box with one camera and that works (USB), > I can take a pic (the script does that) and see that on a webpage. > > However, I want to have a couple of cameras a li

Re: [CentOS] LSI software raid with centos 5.4

On 5/24/2010 4:10 AM, CList wrote: >>> I have been trying to install CentOS 5.4 on a Intel SR1530SHS, Intel >>> > S3200SH > >>> mainboard.. It has a 3 x 1TB sata hotswap drives with LSI software raid >>> onboard. >>> >>> I had configured the LSI to have Sata0 and Sata1 with raid 1 and t

Re: [CentOS] OT: What are the 2 openssl commands I need to use?

On 12/29/2009 11:36 AM, Lanny Marcus wrote: > I looked on the openssl man page but am too dense with commands to > understand what I need to do. Ran into problems generating a key > and CSR for SSL, because the web site is on a server with an old > Ensim Control Panel. Please someone knowle

Re: [CentOS] [OT] Urgent request

On 12/17/2009 1:20 PM, tdu...@sc.rr.com wrote: > "William L. Maltby" wrote: > >> On Thu, 2009-12-17 at 13:29 -0500, tdu...@sc.rr.com wrote: >> >>> m.r...@5-cent.us wrote: >>> >>> >> >>> We have been searching the internet since Tuesday. >>> >>> We have already tr

Re: [CentOS] info about hdds in raid

Eugeneapolinary Ju wrote: > How can I tell wich HDD to swap, when the "cat /proc/mdstat" says one > HDD of the RAID1 array has died? > > Does the HDD's has some serial numbers, that I can see in "reality", > and I can get that number from e.g.: a commands output? > > How could I know wich HDD to

Re: [CentOS] Newsletter feedback

Frank Thommen wrote: > Hi, > > >> We have now published the sixth version of the Newsletter [...] >> > > What newsletter are you referring to? I cannot find any newsletter > offer on centos.org. > > frank > Its in the wiki http://wiki.centos.org/ __

Re: [CentOS] sendmail question

Dan Carl wrote: > Jerry Geis wrote: > >>> My guess would be a resolving problem also. >>> Its usually what causes sendmail to slow down. >>> Check your /etc/hosts file >>> Dan >>> >>> >>> >> My /etc/hosts

Re: [CentOS] sendmail question

Jerry Geis wrote: >> My guess would be a resolving problem also. >> Its usually what causes sendmail to slow down. >> Check your /etc/hosts file >> Dan >> >> > My /etc/hosts file is only has the "nameserver x.x.x.x" entry. > > the /var/log/maillog shows the entry right away when "mail" on t

Re: [CentOS] sendmail question

Les Mikesell wrote: > Jerry Geis wrote: > >> Hi all, >> >> I have a local user account call "panel" on a machine. >> When I use the mail command to manually send email to the panel account >> it over 1 minute until that mail actually deposited in the mail account. >> >> What setting is that redu

Re: [CentOS] bind question, please help

adrian kok wrote: > in my understanding: > > > 1/ this allow internal network can query zone and outside > allow-query { localhost; internal-network; }; > recursion yes; > > > 2/ this allow internal network can query zone but not outside > >allow-query { localhost; i

Re: [CentOS] More about firewalling

ML wrote: > I have a Comcast business circuit with 13 IP's. The gateway device > they provide is a 'pass through' device. They sent traffic for all 13 > IP's my way. It just allows traffic through. So if I put in a device > to firewall (like Ipcop or Vyatta or something) in front, say it has

Re: [CentOS] dhcpd logging to dhcpd.log only

Jim Perrin wrote: > On Tue, Sep 22, 2009 at 11:33 AM, Dan Carl wrote: > >> I've added this to my dhcpd.conf >> log-facility local6; >> and >> added this to my syslog.conf >> local6.* /var/log/dhcpd.log >> >> It's still writ

[CentOS] dhcpd logging to dhcpd.log only

I've added this to my dhcpd.conf log-facility local6; and added this to my syslog.conf local6.* /var/log/dhcpd.log It's still writing to dhcpd info to both log files. How do I stop this. I've googled but all suggested modifications I've made to the dhcpd.conf causes dhcpd to not start. Tha

Re: [CentOS] Secure mail login problem

On 6/25/2009 5:35 PM, S.Tindall wrote: On Thu, 2009-06-25 at 23:00 +0100, Ned Slider wrote: Bob Hoffman wrote: Hi all, Finally got around to making sendmail and dovecot use a secure log in procedure on my server. Now when I open up outlook it goes through a secure log in. Unfortunatel

Re: [CentOS] Upgrade mail server to new machine

Thom Paine wrote: >> if local users copy /home/* /etc/passwd /etc/shadow after first making sure >> there are no dupes on new system >> >> as for mail - what format is tha mail box in? >> >> maybe as simple as copying /var/spool/something >> >> personally i like to use rsync for this as it keeps pe

Re: [CentOS] Port Forwarding woes

Bo Lynch wrote: > On Mon, April 27, 2009 12:01 pm, Dan Carl wrote: > >> Bo Lynch wrote: >> >>> I'm having some port forwarding issues issues with iptables. >>> We are using iptables as a firewall with 2 nics and on ip alias. >>> I'm t

Re: [CentOS] Port Forwarding woes

Bo Lynch wrote: > I'm having some port forwarding issues issues with iptables. > We are using iptables as a firewall with 2 nics and on ip alias. > I'm trying to port forward on the alias ip > eth0 = 65.x.x.1 > eth0:1 = 65.x.x.2 > eth1 = 192.168.x.x > > I'm wanting to forward certain ports(80,5071.

Re: [CentOS] WAY OT: domain name registration .co.za

Glenn wrote: > Hello All, > > Very sorry about WAY off-topic query, but you folks really are one of > my most International subscribed groups. > > I am looking for a recommendation for a domain name registrar I can > register my .co.za domain name with that won't 'yank my chains'. I > tried a co

Re: [CentOS] centos 5.2 - latest rpms for mailcanner , clamav and spamassassin

Linux Advocate wrote: > Guys, acording to the quickinstall.txt guide on the mailscanner site, there > is an install.sh file which installs the mailscanner rpm, all the other perl > rpms. Additionally, the site has also clam av and spamassassin installers too? > > any experience on these things?

Re: [CentOS] Software Raid Recovery

John R Pierce wrote: > Dan Carl wrote: > >> I don't raid swap. >> As stated in the Software Raid How-To >> ||"There's no reason to use RAID for swap performance reasons. >> > > BP! > > you want to MIRROR swap for RELIABILITY r

Re: [CentOS] Software Raid Recovery

Stephen Leonard Character wrote: >> As posted early having swap on a raid zero is a bad idea . >> Dan >> > > > Yes I wasn't thinking too clearly when I made the swap raid0, well I did > think about performance, but not drive failure :( > > Thanks everyone for your help, > Stephen > > I did

Re: [CentOS] Software Raid Recovery

Stephen Leonard Character wrote: > On Fri, Feb 20, 2009 at 3:15 PM, Stephen Leonard Character > wrote: > >> I have a server set up with 4hdd using software raid. I have /boot on >> > a > >> raid1 on md0 , / on raid5 on md1, and swap on raid0 on md2. If one of >> > my > >> drives

Re: [CentOS] iptables question

ward.p.fonte...@wellsfargo.com wrote: > Hi, > > I have two servers in the same subnet, one has this arrangement: > > BOX A [3 ips, one real two vips] > > BOX B [1 ip] > > I need to redirect input from one of the vips (192.168.0.1:8080) on BOX > A to BOX B (192.168.0.2:8080) and I'm about to pull my

Re: [CentOS] Yum update conflicts perl-Math-BigInt

Kai Schaetzl wrote: > Dan Carl wrote on Thu, 05 Feb 2009 11:27:30 -0600: > > >> If I remove the conflicting perl packages won't this break MailScanner? >> > > No. It might break your Perl, though, if it overwrote anything from Perl. > In that case you w

Re: [CentOS] Yum update conflicts perl-Math-BigInt

Kai Schaetzl wrote: > Dan Carl wrote on Wed, 04 Feb 2009 14:48:23 -0600: > > >> add check_obsoletes = 1 does nothing >> > > Not in this situation, as you didn't tell everything last time ;-) > Sorry, I usually post too much info > > Correct.

Re: [CentOS] Yum update conflicts perl-Math-BigInt

Kai Schaetzl wrote: > Dan Carl wrote on Fri, 30 Jan 2009 15:13:50 -0600: > > >> I followed the Wiki instructions for setting up *yum-priorities*. >> I added the rpmforge repo >> I installed clamd without a problem. >> Now when I go to update I ge

[CentOS] Yum update conflicts perl-Math-BigInt

I followed the Wiki instructions for setting up *yum-priorities*. I added the rpmforge repo I installed clamd without a problem. Now when I go to update I get conflicts with perl-Math-BigInt. Is the only solution to uninstall the base version and then install the rpmforge version? According the

[CentOS] Centos Website

I can't connect, appears to be down. Thought I'd post in case whoevers in charge is listening here. Dan ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

RE: [CentOS] Mirroring Hard Drive

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Les Mikesell > Sent: Friday, August 01, 2008 3:16 PM > To: CentOS mailing list > Subject: Re: [CentOS] Mirroring Hard Drive > > > Joseph L. Casale wrote: > >> brute force approach... > >> > >>dd if=/d

RE: [CentOS] Bind Firewall Rules

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Scott Mazur > Sent: Wednesday, July 23, 2008 12:19 PM > To: CentOS mailing list > Subject: Re: [CentOS] Bind Firewall Rules > > > On Wed, 23 Jul 2008 12:40:42 -0400, John Hinton wrote > > I'm running cach

RE: [CentOS] Ideas for stopping ssh brute force attacks

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Bo Lynch > Sent: Monday, July 21, 2008 3:43 PM > To: centos@centos.org > Subject: [CentOS] Ideas for stopping ssh brute force attacks > > > just wanted to get some feedback from the community. Over the la

RE: [CentOS] copy

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Mad Unix Sent: Monday, July 21, 2008 11:14 AM To: CentOS mailing list Subject: Re: [CentOS] copy >How would you do the >tar zcvf - /usr/local/apache/htdocs | ssh [EMAIL PROTECTED] PROTECTED]

RE: [CentOS] Rejecting spam

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Glenn > Sent: Tuesday, March 04, 2008 2:00 PM > To: CentOS mailing list > Subject: Re: [CentOS] Rejecting spam > > > At 02:35 PM 3/4/2008, you wrote: > > >Sorry, not a direct CentOS question, but I know t

RE: [CentOS] disable SELinux

> > for testing, i need to disable selinux, but something still not working > right. > > i'm trying to figure out why i can't access http://10.0.0.160 from the > same network (10.0.0.x). > > on 10.0.0.160 box, i can access http://localhost, or http://10.0.0.160, > but from any other compute

RE: [CentOS] Send in your favorite CentOS slogan today

Heard someone mention free beer, had to participate. CentOS, we find RedHat's bugs CentOS, the OS that makes sense. Dan ___ CentOS mailing list CentOS@centos.org http://lists.centos.org/mailman/listinfo/centos

RE: [CentOS] smtp mailer or SMART_HOST in sendmail.mc

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Jerry Geis > Sent: Thursday, February 28, 2008 11:12 AM > To: CentOS ML > Subject: [CentOS] smtp mailer or SMART_HOST in sendmail.mc > > > Is there a EASY way to change the SMART_HOST in sendmail.mc. > So

RE: [CentOS] How to speed up Rsync transfers

> On Sun, 2008-02-24 at 17:53 -0600, Dan Carl wrote: > > - Original Message - > > From: "William L. Maltby" <[EMAIL PROTECTED]> > Don't be afraid to seek/request some kind of raid/NAS/SAN resource if > the data is mission-critical, growin

Re: [CentOS] How to speed up Rsync transfers

- Original Message - From: "William L. Maltby" <[EMAIL PROTECTED]> To: "CentOS General List" Sent: Saturday, February 23, 2008 12:32 PM Subject: Re: [CentOS] How to speed up Rsync transfers On Sat, 2008-02-23 at 10:38 -0600, Dan Carl wrote: - Original

Re: [CentOS] How to speed up Rsync transfers

- Original Message - From: "nate" <[EMAIL PROTECTED]> To: Sent: Friday, February 22, 2008 10:33 PM Subject: RE: [CentOS] How to speed up Rsync transfers Dan Carl wrote: I just ran a test from one local box the another on a 100Mbit link and the fastest tra

RE: [CentOS] How to speed up Rsync transfers

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of nate > Sent: Friday, February 22, 2008 11:06 AM > To: centos@centos.org > Subject: Re: [CentOS] How to speed up Rsync transfers > > > Dan Carl wrote: > > Is there a way t

[CentOS] How to speed up Rsync transfers

Is there a way to speed up rsync transfers? I tested the bandwidth with iperf (recommended to me in an earlier post & worked well)its as advertised by my ISP's around 740KB/sec. When I manually run my rsync script with the --progress switch the transfers are around 100KB/sec. I googled this and the

[CentOS] Command line tool to test bandwidth between 2 servers

What's the best way to do this? Daily, jpg images are added to an inhouse server. Everynight I want to backup these images to a server offsite, via rsync. What I want is to determine what to set the bwlimit to. I also want to estimate how many MB's of images I can move nightly. Thanks Dan __

RE: [CentOS] Switching To Raid1

> -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of Matt > Sent: Wednesday, January 09, 2008 10:55 AM > To: CentOS mailing list > Subject: [CentOS] Switching To Raid1 > > > I have this ASUS M2NBP-VM motherboard http://tinyurl.com/3xby3h > running CentOS 4.

RE: [CentOS] Migrating software raid from SUSE 9.0 to Centos 5

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Les Mikesell Sent: Monday, January 07, 2008 12:39 PM To: CentOS mailing list Subject: Re: [CentOS] Migrating software raid from SUSE 9.0 to Centos 5 > > > > Dan Carl wrote: >> I forg

RE: [CentOS] Migrating software raid from SUSE 9.0 to Centos 5

-Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Les Mikesell Sent: Friday, January 04, 2008 6:29 PM To: CentOS mailing list Subject: Re: [CentOS] Migrating software raid from SUSE 9.0 to Centos 5 Dan Carl wrote: > I forgot to add the file system

RE: [CentOS] Migrating software raid from SUSE 9.0 to Centos 5

I forgot to add the file system is riserfs. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dan Carl Sent: Friday, January 04, 2008 5:43 PM To: centos@centos.org Subject: [CentOS] Migrating software raid from SUSE 9.0 to Centos 5 I have a SUSE 9.0 box with

[CentOS] Migrating software raid from SUSE 9.0 to Centos 5

I have a SUSE 9.0 box with a software raid. It consists of 6 IDE drives and three different controllers The OS is on a separate drive. What I want to do is put a new boot drive in load Centos on it. Then I want to be able to mount the raid without loosing any of the data on it. What information do

Re: [CentOS] Installing java on CentOS 5

- Original Message - From: "Craig White" <[EMAIL PROTECTED]> To: Sent: Wednesday, November 14, 2007 2:15 PM Subject: [CentOS] Installing java on CentOS 5 > strugging with things here... > > tried tracking the info on the Wiki (which apparently is now in need of > a maintainer)... > htt

Re: [CentOS] mount cd

- Original Message - From: "Hiep Nguyen" <[EMAIL PROTECTED]> To: Sent: Friday, October 26, 2007 12:52 PM Subject: [CentOS] mount cd > hi there, > > i can mount my cdrom with this command: mount -t iso9660 /dev/cdrom cdrom/ > > how do i mount the cdrom everytime the computer is boot? A

Re: [CentOS] Trying to recover data off SATA-to-SCSI external 2TBARRAY

- Original Message - From: "Antonio da Silva Martins Junior" <[EMAIL PROTECTED]> To: "CentOS mailing list" Sent: Monday, October 15, 2007 4:30 PM Subject: Re: [CentOS] Trying to recover data off SATA-to-SCSI external 2TBARRAY > > - "D

Re: [CentOS] Trying to recover data off SATA-to-SCSI external 2TBARRAY

- Original Message - From: "Michael Watters" <[EMAIL PROTECTED]> To: "CentOS mailing list" Sent: Monday, October 15, 2007 3:12 PM Subject: Re: [CentOS] Trying to recover data off SATA-to-SCSI external 2TBARRAY > > > So thats why I connected it to a SCSI non-raid controller which does.

Re: [CentOS] Trying to recover data off SATA-to-SCSI external 2TBARRAY

On Monday 15 October 2007, Dan Carl wrote: ... >> The SmartArray doesn't recognize the external array. >> So thats why I connected it to a SCSI non-raid controller which does. >> lvndiskscan on my Centos server even can tell the size of it. >> /dev/sda

Re: [CentOS] Trying to recover data off SATA-to-SCSI external 2TBARRAY

On Monday 15 October 2007, John R Pierce wrote: > Peter Kjellstrom wrote: > > On Monday 15 October 2007, Dan Carl wrote: > > ... > >> But with errors > >> In dmesg have this: > >> sda: Mode Sense: bf 00 00 08 > >> SCSI device sda: drive cache: w

[CentOS] Trying to recover data off SATA-to-SCSI external 2TB ARRAY

Original the array was attach to an HP server via a Smart Array Controller.(which I didn't setup, I just inherited the problem) This controller no longer recognizes the array even though the front panel of the array indicates its intact. I then took the array and plugged it into my Centos server an

Re: [CentOS] Can't get XFS enabled on Centos 5.0

On Thursday 11 October 2007, Dan Carl wrote: > >I anm trying to enable XFS with no success. > >I followed the instructions provided in > >http://wiki.centos.org/Repositories/CentOSPlus >> I installed the new kernel. > >Example: 2.6.18-8.1.14.el5.centos.plus >> &

[CentOS] Can't get XFS enabled on Centos 5.0

I anm trying to enable XFS with no success. I followed the instructions provided in http://wiki.centos.org/Repositories/CentOSPlus I installed the new kernel. Example: 2.6.18-8.1.14.el5.centos.plus I also installed these packages as described in a post I found yum install --enablerepo=centosplus x