John Hodrien wrote:
> On Tue, 18 Dec 2018, mark wrote:
>
>> Is there something missing?
>
> An updated nvidia-x11-drv-304xx package. Have you queried this with
> elrepo? Is 304 a dead-end now given it's not had an update since September
> 2017?
(Please ignore mark, loo
r what is different - non-monetary -
> incentive you have for doing so?
>
Who, Paramount? That's who owns Trek
mark "beam me up, Scotty, there's *no* intelligent life here"
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
John Hodrien wrote:
> On Tue, 18 Dec 2018, mark wrote:
>
>
>> I've got a user with a legacy NVidia card. I've got kmod-nvidia. Last
>> time I did an update, all I did was yum update --disableexcludes. This
>> time, it fails, with Error: Package:
>> nvidia-x11-drv-
ack to the proprietary
driver?
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
, put it
into a hot-swap or external bay, and dd the entire drive to an identical
one. THAT goes to forensics.
Alternatively, pull the h/d, put in a new one, reset the BIOS to factory
settings - that includes pulling the battery... *then* set what you need,
and then build it
the motherboard).
>
> Actually yes I used them many times back on C7.5 Both the motherboard
> and USB adapter.
>
I'm a tad confused: you said the USB drive was brand new - did you use
them with C 7.5, or not? Can you try to do a b/u
heavy lower line, one very thin line a few
pixels above it, sort of like
--
==
Clues for the poor?
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
e IP every
time, based on its MAC address (we do that latter here).
Hope that helps.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
. I like things wo work the way I want, and no, the way
they want to do it isn't how I want it... which, of course, is the *Nix
Way.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
t; I'd be very grateful for suggestions.
>
Condolences.
I think how I'd go about it would be to boot off a rescue disk, then
either try to mount the raid, or just edit the /etc/mdadm.conf, and tell
it only sda, and maybe sdb marked as failed. Then see if you can mount the
raid.
mark
__
rdon, a simpler answer than mine, with the same effect,
that /dev/sdb failed as far as mdadm was concerned.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
The install from a USB key fails. It's showing ata2:0.0 failed to
IDENTIFY. I've been searching online, and the only hint I have is that it
might not understand the controller.
New Dell Optiplex 7050.
Haanyone run into this?
mark
___
CentOS
Radu Radutiu wrote:
> On Tue, Nov 27, 2018 at 3:14 PM mark wrote:
>
>> What we do is to have the encryption key of the secondary filesystem in
>> /etc/crypttab, which is, of course, 600. As it boots, it decrypts from
>> that as it mounts the rest of the system.
>
ut it along with possible
sources (including signers that are no longer issuing them), see
<http://kb.mozillazine.org/Getting_an_SMIME_certificate>.
/mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ly need an account.
> Which I don’t have.
Do you mean Youtube account or some other sort? I've got a YT account
but the videos are still all private.
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
investigated yet:
>
> * the normal boot menu doesn't appear. The back up kernels and setup may
> have actually been removed. I need to look into this.
Time to USB boot rescue, and
>
> * My console font is now HUGE!
Sounds like default VESA driver.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
tried, Quanta, had the lovely habit of, once
you hit ?display", when you went back to editing, it has left justified
*every* *line*.
I hate to suggest it, but something like WordPress might be what you want,
if that's not overkill.
mark "my web pages proudly built in vi"
___
has two IPv6 addresses - my manager has fallen
for slack. Both valid.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
vironment. RHEL does not
use CDE.
RHEL uses "KDE". KDE = https://en.wikipedia.org/wiki/KDE
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
sure that there will be a way to continue on that path.
--
_
°v°
/(_)\
^ ^ Mark LaPierre
Registered Linux user No #267004
https://linuxcounter.net/
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo
he positions immutable didn't help.
> I'm going to have to look at Trinity.
>
Odd, I've never had that problem. On the other hand, I *really* dislike
gnome. I think their target is 16 yr olds.
mark
___
CentOS mailing list
CentOS@centos.org
https:
anger for saying this but I actually think they get
open source now, and Canonical (or SUSE) would be safe with them. They'd
destroy the value of the purchase if they mucked it up or tried to
integrate it.
Time will tell, I guess.
--
Mark Rousell
___
k compared to high end name-brand
x86-64 servers (i.e. higher prices but not unimaginably so for the extra
power -- pun intended).
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
around the licensing. I expect the same proprietary
extensions that upstream does, but not much more.
And, as I said, I can see them pushing their customers, hard, to migrate,
not to another IBM o/s, but to Linux. A huge part of IBM, now, is service
and support.
mark
Mark Rousell wrote:
> On 30/10/2018 17:14, Simon Matter wrote:
> Yup. When I looked at IBM Power machines before (maybe about a year ago,
> not sure), there was actually a pricing tool on the website. You could go
> through various options for machines (GPUs, CPUs, storage,
ercut them in a large enough scale. But it seems that a lot of people
in larger businesses still like the security of "IBM" (even if they
choose to run Linux on the boxes).
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 30/10/2018 16:40, mark wrote:
> Linux was IBM's silver
> bullet on a free platter. I mean, *how* many operatings systems do you
> want to support...?
Yup, it must cost them a pretty penny to maintain all those proprietary
operating systems (especially when you include their mainframe
Mark Rousell wrote:
> On 30/10/2018 14:49, mark wrote:
>
>
>> I wouldn't expect a system 1, if that's the current name
>>
>
> AS/400 -> eServer iSeries -> System i -> Power Systems
> RS/6000 -> eServer pSeries -> System p -> Power Systems
>
>
rol how users start their containers and I
> cannot force them not to forward ports. But I will see if I can prevent
> Docker from manipulating iptables as described in the very helpful link
> below.
>
There is a security level, but it would break some user's docker packages.
The more I learn about docker, the more I actively dislike it as a massive
security hole.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 30/10/2018 14:49, mark wrote:
> I wouldn't expect a system 1, if that's the current name
AS/400 -> eServer iSeries -> System i -> Power Systems
RS/6000 -> eServer pSeries -> System p -> Power Systems
So the current 'Power Systems' range combines what was AS/400
m x) but on POWER, that could be interesting.
Haven't the IBM x86 servers gone to Lenovo now?
As far as I can see, IBM Power Systems *are* in effect what you are
looking for, i.e. a Power-based server to run Linux (or AIX or IBM i if
you prefer) -- well, that's how IBM would see it I think. They a
> If they came back now with something like their deprecated X86 servers
> (Netfinity, System x) but on POWER, that could be interesting.
>
Um, yep. The AS/400/system 1/whatever is not a small system. It's what
used to be called a mid-frame, not a micro. It's money.
Back around '94, I
es but I wonder how they
compare in practice with Epyc or Xeon systems.
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
don't know how bad it is and the implications for CentOS...
That old war wound started aching again.
IBM:Redhat :: Oracle:Sun
Actually, it could have been *much8 worse: *Oracle* could have bought RH.
That *really* would have been an order of magnitude worse.
mark
that if a system
doesn't get its IPv6 address, NFSv4 goes preferentially for that, and if
it has that, and looses it, it will *NOT* fall back to IPv4, but hangs.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
Gordon Messmer wrote:
> On 10/26/18, Andrew Pearce wrote:
>
>> On 2018-10-26 16:25, mark wrote:
>> I believe this should remove any ipv6 rules (rules and chains)
>>
>> ip6tables -F ip6tables -X
>
> You might want to clear the other tables, too:
>
>
>
Working on a script, and to test, I need to shut down ip6tables
temporarily. firewalld is running; is there any way to shut down *just*
ip6tables?
I tried installinf iptables-services, and did a systemctl stop ip6tables,
and no joy.
mark
Has anyone else been having problems with the dhclient -6 dying?
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On 10/23/18 14:45, Phil Perry wrote:
On 23/10/18 19:05, mark wrote:
Been looking, and haven't found the answer: in c7, is there a firewall-cmd
command, or a systemctl cmd, to check whether ip6tables firewall is
running
Yes, the same as for any other service:
systemctl status
Been looking, and haven't found the answer: in c7, is there a firewall-cmd
command, or a systemctl cmd, to check whether ip6tables firewall is
running
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
init.d to find the damn name (nfs? nfsd? idmapd?
nfs-idmapd? rpc-idmapd?)
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
Elliott Balsley wrote:
>> From a end state perspective, it does not matter . . yum update after
>> the install (of either) ends at exactly the same place.
>
> I will not be running any updates, because I need to keep a specific old
> version for software compatibility. I don't know which ISO the
w of the response being "tough, it's
the Wave of the Future", and Poettering is like upper management: they
know, I mean, Everything, so why should they need to talk to end users (or
working sysadmins)?
Lack of screaming and yelling filling this venue is more because "w
On 17/10/2018 20:03, Warren Young wrote:
> On Oct 17, 2018, at 10:03 AM, Mark Rousell wrote:
>> launchd is not being forced on them as systemd is in practice
> Try doing without launchd on macOS.
>
> If you think that’s irrelevant, count the number of MacBooks at the next
&g
to an otherwise empty /etc/sysconfig/network.
What am I missing?
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
actly what a lot of systemd's critics say, too.
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ems to me that what you say in your first paragraph above applies
not just to RH-ecosystem Linuxes but probably to all corporate-focussed
ones in both the RH and SUSE ecosystems.
It's mainly the Debian world where it seems to me that there is still
room for smaller entrants (including a
Gordon Messmer wrote:
> On 10/16/18 1:24 PM, mark wrote:
>
>> Gordon Messmer wrote:
>>
>>> As best I recall, there's no support in the UI for LVM volumes with
>>> RAID level. (And I don't see any such option in the kickstart
>>> documentation,
Gordon Messmer wrote:
> On 10/15/18, mark wrote:
>
>> In the disk partitioner, I can't
>> 1) choose to make the LVM with root and swap be on a RAID 1. Is there
>> some way to do that, rather than two separate partitions RAIDed?
>
> As best I recall, there's no sup
o VT 2 (Alt+Ctrl+F2) just before going into the
partitioner and do whatever you like with fdisk (etc) then switch back
to the graphical installer and upon entry the first time rescan the
drive(s).
/mark
___
CentOS mailing list
CentOS@centos.org
https:/
created those two, manually,
and nope, it wiped them out, so I can't clone those two.
Any solutions for either of these? I don't have hardware RAID card on this
box.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman
Leroy Tennison wrote:
> From: CentOS on behalf of mark
>
> Sent: Friday, October 12, 2018 10:11 AM
> Valeri Galtsev wrote:
>
>> On 10/12/18 8:40 AM, Leroy Tennison wrote:
>>
>>> And I thought it was a Kubuntu (Ubuntu with KDE desktop for those who
>>&
out some bugs... like t-bird "oh, you *can't* not want your
email when you hit in the list, saving to your sent folder
isn't enough copies
>
>
> [no beginning of rant tag, as I'm not certain where to put it]
>
> Valeri
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
And it's annoying - I miss something, and suddenly I'm at the bottom of
the page, instead of one window down.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ver, several things: what I've had to do on our new
rebranded Supermicro boxen is to go into the BIOS, and tell it *not* to
dual boot (that is, legacy BIOS or UEFI), and *not* legacy, but *only*
UEFI.
I will note that we've been using GPT on secondary drives since we started
buying drives > 2TB
nf may have
the encryption that you're currently using disabled, as it's too weak.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ajor semi-proprietary
system we knew about anyway). However, your employer (and your
employer's industry) was very different: It clearly ran numerous
disparate code bases, many developed in house, many of which were
non-compliant and whose compliance was unknown until you found and fixed
them.
I was de
there it will not
be fixed in CentOS, no matter what the release number might be in 2038.
--
_
°v°
/(_)\
^ ^ Mark LaPierre
Registered Linux user No #267004
https://linuxcounter.net/
___
CentOS mailing list
CentOS@centos.org
https
On 03/10/2018 02:46, Mark Rousell wrote:
> I don't think I've ever said this but [...]
Oops, sorry. This was off-topic here. I actually thought this was a
different mail list where it would have been on-topic.
--
Mark Rousell
___
CentOS mail
ess.
Perhaps I should be pleased the actual 99/00 changeover went so smoothly
afterall.
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
e who have
deliberately chosen to run CentOS. We all have to start somewhere and
this is as good a place as anywhere. But be aware that running a mail
server is a big commitment to time and maintenance.
--
Mark Rousell
___
CentOS mailin
On Thu, 20 Sep 2018, Mark Milhollan wrote:
>On Thu, 20 Sep 2018, Kenneth Porter wrote:
>> I'm about to publish a fixed IPv6 address and I understand I can use the ip
>> token command to lock the host part of the RA-assigned address to a fixed
>> value. But I can't
lly downloaded and
> attempted to use the new firmware, because most of the time, I decide
> that it will give me no relevant benefit.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ise support"? Dell
supports Linux (hell, their OMSA disk *is* CentOS), but only their
enterprise support knows something other than WonDoze.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
Here's a question that I have3n't found the answer to yet: does anyone
know the effect of enabling FIPS mode for apache? Will it break existing
websites? Does code need changing? Configuration, other than enabling it?
mark
___
CentOS mailing list
the other hand, a) why do you
need to update the firmware, and b) these seem to be getting old; other
than for a special RAID box or two, we haven't bought anything smaller
than 4TB in years, and the last couple of years, 8TB drives.
So, back to a), why do you need to do this?
mark
_
On Tue, 25 Sep 2018, Zube wrote:
>Is there some way to get kernel-debuginfo-2.6.32-754.3.5.el6.x86_64?
Worst case use the full name:
yum install kernel-debuginfo-2.6.32-754.3.5.el6.x86_64
/mark
___
CentOS mailing list
CentOS@centos.org
ht
On Fri, 21 Sep 2018, Patrick Begou wrote:
> firewall --enabled --ssh --service=nfs --port=111:tcp,111:upd,875:tcp,875:upd
udp not upd.
/mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
your own systemd.network(5)
unit for all the interfaces -- perhaps one of the two latter things
while waiting for the former.
/mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ly the check is there to avoid an abort when the commands are issued
but w/o the feature present. So customize the script -- it sounds like
you found the one that's at fault.
/mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mail
Stephen John Smoogen wrote:
> On Wed, 5 Sep 2018 at 16:13, mark wrote:
>
>> Anyone familiar with this? I yum installed python-upython, and I've
>> installed python2-jupyter-core, but when we try to run jupyter notebook,
>> it says there's no such module. So I try to
0, 3.1, or 3.2.
When using Python 2.7, please install IPython 5.x LTS Long Term
Support version.
Given that the version I get from the RPM of python-ipython is 3.2.1-1,
I'm confused.
Clues for the poor?
mark
___
CentOS mailing list
CentOS@cent
hat an "old Pentium" can
address that.
Don't they also call 686's Pentiums?
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
s://en.wikipedia.org/wiki/Pentium_FDIV_bug
>
Which a lot of us referred to as the rePentium chip.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
rt with minimal (but make sure it
includes networking).
Please note that I installed CentOS 6, just a few months ago, on an HP
Netbook from '09, and it runs perfectly well.
mark "see? I didn't say anything about systemd"
___
CentOS maili
that
had actual SCSI drives
The only problems we've had on the latest C 7 kernels *seem* to be related
to a specific Intel chip or two. Otherwise, the older servers work just
fine.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
he tools it uses so you might consider
submitting an upstream bug report.
/mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
Steffan A. Cline wrote:
> I’ve looked and looked and can’t seem to find anything which would
> explain why grub.cfg would have been rewritten with a whole new volume
> group name.
>
> Suggestions?
>
C6 or C7? In either case, have you looked in /etc/defau
-screensaver:kscreensaver quiet
use_uid
Now, we'd like to add sudo to that list. Does anyone know *where*
authconfig gets that list in the first place? I haven't been able to find
anything yet, and I've been looking.
mark
___
CentOS mailing list
CentOS@centos.org
v old/lost+found .
#mv old/root . -- WHY?
mv old/scratch .
mv old/new/* .
sync
sync
Make selinux reset all the security file labels
touch /.autorelabel
Reboot, and when it comes back up, rerun grub2-install
mark
___
CentOS mailing list
CentOS@cent
On Tue, 2018-08-28 at 15:48 -0400, Stephen John Smoogen wrote:
> On Tue, 28 Aug 2018 at 14:56, mark wrote:
> >
> > Patrick Laimbock wrote:
> > > On 28-08-18 17:51, Alicia Smith wrote:
> > > > If I need to check on something, I'll run ldapsearch, wh
Stephen John Smoogen wrote:
> On Tue, 28 Aug 2018 at 14:56, mark wrote:
>
>>
>> Patrick Laimbock wrote:
>>
>>> On 28-08-18 17:51, Alicia Smith wrote:
>>>
>>>>
>>>> I just joined this mailing list, so I apologize in advance if th
g a ton of fixes compared to upstream's latest
> release.
>
> tl;dr use the latest RPMs from the LTB Project or Hymas.
>
Ok, problem for me: all our servers and workstation are connected to the
AD. If I need to check on something, I'll run ldapsearch, which is from
openldap-clients. Is ther
a resolution, or is this a bug?
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
t;>
>>> Note, if the hostname for your roundcube instance is one of the
>>> ipv6 entries in your /etc/hosts file, I'd remove that - and either put
>>> in an ipv4 entry or put an entry for it in your dns.
>>>
>>
>> Thanks again! I still think it's a mai
Valeri Galtsev wrote:
> On 08/09/18 14:57, mark wrote:
>
>> Can I go to an existing xfs file system, and apply a soft quota to each
>> user on it? If I do, can I then run a report, and see who's using how
>> much, or does it only apply to files created after the quotas a
Can I go to an existing xfs file system, and apply a soft quota to each
user on it? If I do, can I then run a report, and see who's using how
much, or does it only apply to files created after the quotas are applied?
mark
___
CentOS mailing list
Does anyone know what Magical configuration file determines whether okular
give measurements, in the properties of a .pdf, in millimeters, rather
than, say, inches or cm or furlongs?
mark
--
Measurements will always be given in the least convenient units, such as
the speed of light
gt; their MAC address with those. 3COM did find the plant making these clones
> and shut them down. But the damage was done to a lot of us.
Oh, wow, I don't remember hearing about that. What a freakin' pain!
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
Valeri Galtsev wrote:
> On 08/01/18 10:10, mark wrote:
>
>> This is among the things we need to do when a user leaves, and it's a
>> larger question than it sounds. Our Office has many servers, with a good
>> number of fileservers for projects, with large filesystems (
long find / -user on all our systems, which is really intensive,
to find all the files own by a given user?
Locate would be great, but from the man pages and what I can find online,
it only stores filenames and paths.
mark
___
CentOS mailing list
resolved, after much difficulty, and go to post the solution,
add [SOLVED] to the subject line. Gets people's attention.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ering about the grub2 defaults, and the
kernel command line.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
ne, before resizing the PV/LV. I
> suspect that something went wrong during that step, but what? As I can
> successfully boot the system manually via dracut, normally everything
> should be ok? no?
>
> What can prevent dracut from activating the 2 LVs (centos/root and
> c
e correct thread, if I click a
link, and some web pages *eat* the system - firefox is frozen for minutes.
Back to 52.x, no problems. And I run noscript, so no ad links.
mark
>
> On 07/27/2018 03:37 PM, wwp wrote:
>
>
> Hello,
>
>
>
> On Thu, 12 Jul 2018 10:36:55 -04
n an undefined
state, because you don't know what some threads that were killed are.
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
]: 55271840D734: removed
>>> Jul 24 11:04:20 ts130 dovecot: lda(tdukes): msgid=<
>>> <mailto:20180724150419.55271840d...@ts130.palmettodomains.com>
>>> 20180724150419.55271840d...@ts130.palmettodomains.com>: saved mail
>>>
>> to INBOX
>>> Jul 24 11:04:20 ts130 postfix/local[21847]: 49161841ED92: to=<
>>> <mailto:tdu...@palmettodomains.com>
>>>
>> tdu...@palmettodomains.com>,
>>> relay=local, delay=0.09, delays=0.02/0.01/0/0.06, dsn=2.0.0,
>>> status=sent (delivered to command: /usr/libexec/dovecot/dovecot-lda -f
>>> "$SENDER" -a
>>> "$RECIPIENT")
>>> Jul 24 11:04:20 ts130 postfix/qmgr[8283]: 49161841ED92: removed
>>>
>>
>> Mail got delivered locally after passing amavis at the mailbox
>> tdu...@palmettodomains.com.
>>
>> Alexander
>>
>
> I am unable to read my system's mail. Cannot read it from roundcube or
> usermin. Roundcube times out on login attemps. In usermin there is no mail
> in the mailbox. There is no mail in /Maildir.
>
> This just started this past Saturday morning. Everything was fine up to
> then.
>
1. Have you checked /var/log/yum.log?
2. Is everything correct in /cron.*?
3. Have you considered running yum reinstall crony?
mark
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
the same
mailserver", just "is a lot of spam coming from that mailhost".
I first ran into that in the early oghts, when one of them blocked ALL
EMAIL from Chicago roadrunner.. which was most of the folks online in the
entire city of Chicago.
mark
>
>
> On 07/24/2018
t they
do not have something scanning for info to sell, or market to - we all
*know* they do that to all free email accounts.
"First, do no harm"? Long gone, eaten by their marketing dept, which is
why the signal-to-noise ratio has gone *way* down in the laft
feel
certain, will come to regret it (some already have come to regret it).
--
Mark Rousell
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
301 - 400 of 1581 matches
Mail list logo
