On Fri, 17 Dec 2010 08:44:46 +0100
"Helmut Drodofsky" wrote:
> Hallo,
Hi,
>
> actual Intel Ethernet cards PCI-E
> - Are normal recognized by Centos 5.5 Live CD
> - Not recognized by 5.2
> Because of vmware, I will use 5.2
Can't you use Xen or KVM ? That way, you,ll have an up
Hallo,
actual Intel Ethernet cards PCI-E
- Are normal recognized by Centos 5.5 Live CD
- Not recognized by 5.2
Because of vmware, I will use 5.2
Update kernel?
Update Modules? What Module?
Thanks for help
Helmut
___
CentOS mail
The centos has support for this controller by default, I just had to do
some tweaking in the actual controller in order to see the virtual
console. I think it was my mistake all along to get this thing going, my
box is flying using Vmware ESX 4.1, the nxt step is to configure centos,
redhat, window
I'm sorry (I know don't feed the trolls), but recently
there have been quite a few remarks resembling this.
Also, I'm beginning to believe the remark made earlier
by ???, which roughly stated "Each time a new release
is due, the flame wars erupt".
Just what part of "CentOS is a Mirror or Redhat
On Fri, 17 Dec 2010, Sean wrote:
> To: centos@centos.org
> From: Sean
> Subject: [CentOS] two cents or not two cents
>
> Hello Producers
>
> "Longevity of Support" is an attractive drawcard for CentOS if it means
> the exact opposite of Fedora's "short support cycle" that does not
> provide upda
Hello Producers
"Longevity of Support" is an attractive drawcard for CentOS if it means
the exact opposite of Fedora's "short support cycle" that does not
provide updating of infrastructural libraries for very long, libraries
which newer versions of applications (like Firefox, Thunderbird, Oper
On Thu, 16 Dec 2010, Ruslan Sivak wrote:
To: centos@centos.org
From: Ruslan Sivak
Subject: [CentOS] MySQL repositores
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Are there any repositories for CentOS 5.5 that keep the latest MySQL
versions?
After enabling everything I can think off (CentOS
On Thu, 16 Dec 2010, Ruslan Sivak wrote:
> To: centos@centos.org
> From: Ruslan Sivak
> Subject: [CentOS] MySQL repositores
>
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Are there any repositories for CentOS 5.5 that keep the latest MySQL
> versions?
>
> After enabling everything I can
At Thu, 16 Dec 2010 21:26:19 + (GMT) CentOS mailing list
wrote:
>
> On Thu, 16 Dec 2010, m.r...@5-cent.us wrote:
>
> > To: CentOS mailing list
> > From: m.r...@5-cent.us
> > Subject: Re: [CentOS] Building packages using RPMBUILD
> >
> > Leonard den Ottolander wrote:
> >> Hello Nico,
> >>
Hello Mark,
On Thu, 2010-12-16 at 16:21 -0500, m.r...@5-cent.us wrote:
> One possibility: suppose someone cracks in as the user that owns those
> directories. They could then install whatever they want in there... and
> the next time you built and installed something, it could carry their
> payloa
On Thu, 16 Dec 2010, Akemi Yagi wrote:
> To: CentOS mailing list
> From: Akemi Yagi
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> On Thu, Dec 16, 2010 at 9:40 AM, Keith Roberts wrote:
>
>> Is there a tutorial on how to create your own third party
>> repository for Centos please?
On Thu, 16 Dec 2010, Bowie Bailey wrote:
To: centos@centos.org
From: Bowie Bailey
Subject: Re: [CentOS] Building packages using RPMBUILD
On 12/16/2010 3:20 PM, Nico Kadel-Garcia wrote:
On Thu, Dec 16, 2010 at 11:00 AM, Leonard den Ottolander
wrote:
Hello Keith,
On Thu, 2010-12-16 at 15:08
2010/12/16 Ruslan Sivak :
> -BEGIN PGP SIGNED MESSAGE-
> Hash: SHA1
>
> Are there any repositories for CentOS 5.5 that keep the latest MySQL
> versions?
>
> After enabling everything I can think off (CentOS, rpmforge, epel), I'm
> still only seeing 5.0.77-4.el5_5.4.
>
> 5.5 came out yesterd
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Are there any repositories for CentOS 5.5 that keep the latest MySQL
versions?
After enabling everything I can think off (CentOS, rpmforge, epel), I'm
still only seeing 5.0.77-4.el5_5.4.
5.5 came out yesterday and 5.1 has been around for a while.
I
On Thu, 16 Dec 2010, m.r...@5-cent.us wrote:
> To: CentOS mailing list
> From: m.r...@5-cent.us
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> Leonard den Ottolander wrote:
>> Hello Nico,
>>
>> On Thu, 2010-12-16 at 15:20 -0500, Nico Kadel-Garcia wrote:
>>> On Thu, Dec 16, 2010 at
Leonard den Ottolander wrote:
> Hello Nico,
>
> On Thu, 2010-12-16 at 15:20 -0500, Nico Kadel-Garcia wrote:
>> On Thu, Dec 16, 2010 at 11:00 AM, Leonard den Ottolander
>> > /usr/src/redhat and sub dirs are owned root.root. If you want to build
>> > as a normal user (and you should!) you should fix
On Thu, Dec 16, 2010 at 11:17:22AM -0800, Benjamin Franz wrote:
> The man page for lastb says if you just complete delete /var/log/btmp
> the system shouldn't recreate it on its own.
And if, for some reason, the system _does_ try to recreate then you
could use mknod to make it a device node that
At Thu, 16 Dec 2010 15:34:33 -0500 CentOS mailing list
wrote:
>
> On 12/16/2010 3:20 PM, Nico Kadel-Garcia wrote:
> > On Thu, Dec 16, 2010 at 11:00 AM, Leonard den Ottolander
> > wrote:
> >> Hello Keith,
> >>
> >> On Thu, 2010-12-16 at 15:08 +, Keith Roberts wrote:
> >>> [rpmbuil...@karsit
Hello Nico,
On Thu, 2010-12-16 at 15:20 -0500, Nico Kadel-Garcia wrote:
> On Thu, Dec 16, 2010 at 11:00 AM, Leonard den Ottolander
> > /usr/src/redhat and sub dirs are owned root.root. If you want to build
> > as a normal user (and you should!) you should fix the ownership of those
> > directories
On 12/16/2010 3:20 PM, Nico Kadel-Garcia wrote:
> On Thu, Dec 16, 2010 at 11:00 AM, Leonard den Ottolander
> wrote:
>> Hello Keith,
>>
>> On Thu, 2010-12-16 at 15:08 +, Keith Roberts wrote:
>>> [rpmbuil...@karsites sox]$ rpm -iv ./sox-12.18.1-1.src.rpm
>>> error: cannot write to %sourcedir /us
On Thu, Dec 16, 2010 at 11:00 AM, Leonard den Ottolander
wrote:
> Hello Keith,
>
> On Thu, 2010-12-16 at 15:08 +, Keith Roberts wrote:
>> [rpmbuil...@karsites sox]$ rpm -iv ./sox-12.18.1-1.src.rpm
>> error: cannot write to %sourcedir /usr/src/redhat/SOURCES
>
> /usr/src/redhat and sub dirs are
On Thursday, December 16, 2010 02:03:23 pm mcclnx mcc wrote:
> if disk large than 2TB, "fdisk" will not work correctly.
For GPT, use gdisk as a substitute for fdisk. gdisk 0.6.10 is available for
CentOS 4 and 5 in the RPMforge third-party repository. The version in Fedora
14 is 0.6.13, for com
On 12/16/2010 11:14 AM, Benjamin Franz wrote:
> On 12/16/2010 10:29 AM, Joe Pruett wrote:
>> a while back i reported an issue where /dev/null was getting set to 600
>> perms after a system update. i finally figured out what it is. i don't
>> care about failed logins and have limited space on some
On 12/16/2010 10:29 AM, Joe Pruett wrote:
> a while back i reported an issue where /dev/null was getting set to 600
> perms after a system update. i finally figured out what it is. i don't
> care about failed logins and have limited space on some servers, so i
> symlinked /var/log/btmp to /dev/nu
sylvan.dcu...@gmail.com wrote:
> here in the readme it does mention 64 bit
What does it say about 64 bit systems? As I said, it sounds like you've
got the driver in the wrong directory. You might check for the driver in
the 32-bit directory, and what does file say about it? You REALLY, REALLY
nee
if disk large than 2TB, "fdisk" will not work correctly.
--- 10/12/16 (四)，Drew 寫道：
> 寄件者: Drew
> 主旨: Re: [CentOS] use parted to create "raw paration"
> 收件者: "CentOS mailing list"
> 日期: 2010年12月16日,四,下午12:10
> > fdisk /dev/sde
> >
> > Hit p to see the list of partitions. Press d to
> del
On 12/16/2010 09:10 AM, Drew wrote:
>> fdisk /dev/sde
>>
>> Hit p to see the list of partitions. Press d to delete a partition. Press
>> n for a new partition.
> Or you can just use t to change the filesystem type.
>
Your disk has a gpt partition on it. Was it previously installed on an
Apple
sylvan.dcu...@gmail.com wrote:
> I did run system-config-network and selected the card as ast-ASpeedTech
> chipsets since my lspci says i have a
> 20:05.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics
> Family (rev 10)
> (==) Using config file: "/etc/X11/xorg.conf"
> dlopen:
a while back i reported an issue where /dev/null was getting set to 600
perms after a system update. i finally figured out what it is. i don't
care about failed logins and have limited space on some servers, so i
symlinked /var/log/btmp to /dev/null. the initscripts package does a
chmod 600 /var
Dear All,
I have managed perfectly fine to install centos 5.5 x64 on a new sun blade
x6270 server module .i had to install in text mode since GUI install mode
was not working
Actually this machine is going to replace my current working very low
hardware server
the server is used as my pri
On 12/16/10 2:56 AM, sync wrote:
> Hi , guys :
>
>
> I have a problem about the sendmail replay . The following is my condition:
>
> I have installed the sendmail server on my laptop which installed CentOS 5.5
> x86 64,
> and I want to set up the sendmail replay.
>
>
> That is to say . If my linux
On Thu, Dec 16, 2010 at 9:40 AM, Keith Roberts wrote:
> Is there a tutorial on how to create your own third party
> repository for Centos please?
>
> That's something I've been meaning to do for a long time.
>
> Now I have cloud hosting, the download bandwidth and usage
> is no longer an issue.
On Thu, 16 Dec 2010, Akemi Yagi wrote:
> To: CentOS mailing list
> From: Akemi Yagi
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> On Thu, Dec 16, 2010 at 8:11 AM, Keith Roberts wrote:
>>
>> I had already installed the packages mentioned in the Centos
>> wiki.
>
> I assume you ar
On Thu, 16 Dec 2010, Robert Heller wrote:
> To: CentOS mailing list
> From: Robert Heller
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> At Thu, 16 Dec 2010 17:00:23 +0100 CentOS mailing list
> wrote:
>
>>
>> Hello Keith,
>>
>> On Thu, 2010-12-16 at 15:08 +, Keith Roberts w
Sorry . This way NOT work due to disk large than 2TB. That is reason I use
"parted" instead of "fdisk".
# fdisk /dev/sde
WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk
doesn't support GPT. Use GNU Parted.
The number of cylinders for this disk is set to 382536.
T
On 12/16/2010 2:56 AM, sync wrote:
> Hi , guys :
>
>
> I have a problem about the sendmail replay . The following is my
> condition:
>
> I have installed the sendmail server on my laptop which installed
> CentOS 5.5 x86 64,
> and I want to set up the sendmail replay.
>
>
> That is to say . If my
> fdisk /dev/sde
>
> Hit p to see the list of partitions. Press d to delete a partition. Press n
> for a new partition.
Or you can just use t to change the filesystem type.
--
Drew
"Nothing in life is to be feared. It is only to be understood."
--Marie Curie
_
On Thu, 16 Dec 2010, Nicolas Thierry-Mieg wrote:
> To: CentOS mailing list
> From: Nicolas Thierry-Mieg
> Subject: Re: [CentOS] centos 5.5 x86_64 - mplayer install problems
>
> Johan Scheepers wrote:
>> good day,
>>
>> I have tried to install mplayer according to instructions from the
>> follow
At Thu, 16 Dec 2010 17:00:23 +0100 CentOS mailing list
wrote:
>
> Hello Keith,
>
> On Thu, 2010-12-16 at 15:08 +, Keith Roberts wrote:
> > [rpmbuil...@karsites sox]$ rpm -iv ./sox-12.18.1-1.src.rpm
> > error: cannot write to %sourcedir /usr/src/redhat/SOURCES
>
> /usr/src/redhat and sub d
On Thu, Dec 16, 2010 at 8:33 AM, Keith Roberts wrote:
> On Thu, 16 Dec 2010, Akemi Yagi wrote:
>> http://wiki.centos.org/HowTos/SetupRpmBuildEnvironment
> I was refering to this Centos wiki article:
>
> http://wiki.centos.org/HowTos/I_need_the_Kernel_Source
>
> The second part.
>
> I'll read up
Johan Scheepers wrote:
> good day,
>
> I have tried to install mplayer according to instructions from the
> following sites..:
>
> http://wiki.centos.org/AdditionalResources/Repositories/RPMForge
>
> http://wiki.centos.org/TipsAndTricks/MultimediaOnCentOS
>
> Then last..:
>
> [r...@johan ~]# yum in
On Thu, 16 Dec 2010, Akemi Yagi wrote:
> To: CentOS mailing list
> From: Akemi Yagi
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> On Thu, Dec 16, 2010 at 8:11 AM, Keith Roberts wrote:
>>
>> I had already installed the packages mentioned in the Centos
>> wiki.
>
> I assume you ar
On Thu, 16 Dec 2010, Leonard den Ottolander wrote:
> To: CentOS mailing list
> From: Leonard den Ottolander
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> Hello Keith,
>
> (Oops, send out the previous mail before it was finished.)
OK!
> On Thu, 2010-12-16 at 15:08 +, Keith R
On Thu, Dec 16, 2010 at 8:11 AM, Keith Roberts wrote:
>
> I had already installed the packages mentioned in the Centos
> wiki.
I assume you are referring to this wiki:
http://wiki.centos.org/HowTos/SetupRpmBuildEnvironment
If not, I strongly recommend reading it through. Up front it warns you
t
Hello,
I use fdisk.
fdisk /dev/sde
Hit p to see the list of partitions. Press d to delete a partition. Press n
for a new partition.
Hope that helps.
Tommy
On Dec 16, 2010, at 11:12 AM, mcclnx mcc wrote:
> we have CENTOS 5.5 on X86. I tried to create a "raw partition" (NOT FS) on
On Thursday, December 16, 2010 11:11:17 am Keith Roberts wrote:
> I had already installed the packages mentioned in the Centos
> wiki.
>
> These won't cause conflicts at all with each other?
Don't know for sure, but in the case of RPMs I've built on CentOS 4 and 5 in
the past they coexisted ok.
we have CENTOS 5.5 on X86. I tried to create a "raw partition" (NOT FS) on a
disk and it continue to show "ext3". How can I get ride of it?
=== procedures=
# parted /dev/sde
GNU Parted 1.8.1
Using /dev/sde
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p
On Thu, 16 Dec 2010, Lamar Owen wrote:
> To: CentOS mailing list
> From: Lamar Owen
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> On Thursday, December 16, 2010 10:08:12 am Keith Roberts wrote:
>> Is there a package I need to install and run to set
>> things up corectly?
> [snip]
On Thursday, December 16, 2010 10:08:12 am Keith Roberts wrote:
> Is there a package I need to install and run to set
> things up corectly?
[snip]
> So what build dir shall I go for?
See the Fedora packaging guidelines, and install 'fedora-packager' from EPEL to
get the tools that help you set u
Hello Keith,
(Oops, send out the previous mail before it was finished.)
On Thu, 2010-12-16 at 15:08 +, Keith Roberts wrote:
> [rpmbuil...@karsites sox]$ rpm -iv ./sox-12.18.1-1.src.rpm
> error: cannot write to %sourcedir /usr/src/redhat/SOURCES
/usr/src/redhat and sub dirs are owned root.roo
Hello Keith,
On Thu, 2010-12-16 at 15:08 +, Keith Roberts wrote:
> [rpmbuil...@karsites sox]$ rpm -iv ./sox-12.18.1-1.src.rpm
> error: cannot write to %sourcedir /usr/src/redhat/SOURCES
/usr/src/redhat and sub dirs are owned root.root. If you want to build
as a normal user (and you should!) y
Philix T A [philixli...@gmail.com] wrote
2) Dont create RAID for swap and / root partition (Not
Advisable)
I would avoid putting / or /swap on RAID0 partitions, but RAID1 should
not only not be a problem, it should be encouraged as a method of
recuperating from a spindle failure.
> [r...@johan ~]# yum install libdvdcss libdvdread libdvdplay libdvdnav
> lsdvd mplayerplug-in mplayer mplayer-gui compat-libstdc++-33
> flash-plugin gstreamer-plugins-bad gstreamer-plugins-ugly
> gstreamer-ffmpeg libquicktime
IIRC the gstreamer-plugins-* are not dependencies of mplayer. Lea
On Thu, 16 Dec 2010, Leonard den Ottolander wrote:
> To: CentOS mailing list
> From: Leonard den Ottolander
> Subject: Re: [CentOS] Building packages using RPMBUILD
>
> Hello Keith,
>
> On Thu, 2010-12-16 at 15:25 +, Keith Roberts wrote:
>> What's that all about - user mockbuild?
>>
>> Is t
good day,
I have tried to install mplayer according to instructions from the
following sites..:
http://wiki.centos.org/AdditionalResources/Repositories/RPMForge
http://wiki.centos.org/TipsAndTricks/MultimediaOnCentOS
Then last..:
[r...@johan ~]# yum install libdvdcss libdvdread libdvdplay lib
Hello Keith,
On Thu, 2010-12-16 at 15:25 +, Keith Roberts wrote:
> What's that all about - user mockbuild?
>
> Is that a user created by one of the rpm builder scripts?
No, it's the user that mock uses for its builds. Most if not all
upstream rpms are built using mock and so are the CentOS r
On Tue, Dec 14, 2010 at 03:44:19PM +0100, Timo Schoeler wrote:
> thus Lisandro Grullon spake:
> > Thank u timo,
> > I will test this further when I get home. I have been having nightmares
> > getting this card working from an OS iso, it appears that the card is very
> > new and the drivers have n
sox-12.18.1-1.src.rpm
[r...@karsites sox]#
[r...@karsites sox]# rpm -iv sox-12.18.1-1.src.rpm
sox-12.18.1-1
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
What's that all about - user mockbuild?
Is that a user created by one of the rpm bui
Moved from a previous thread :)
On Thu, 16 Dec 2010, John Hodrien wrote:
> To: CentOS mailing list
> From: John Hodrien
> Subject: Re: [CentOS] Stripping silent periods from MP3s
>
> On Thu, 16 Dec 2010, Keith Roberts wrote:
>
>> Thanks for all the responses!
>>
>> I've read MaximumRPM from:
>>
I have been following the MaximumRPM guide from here:
http://www.rpm.org/max-rpm-snapshot/index.html
and it seems a bit dated, but still very good (if fact the
best all round documentation I have found so far) on using
RPM package manager, and how to build rpm packages.
The guide tells me to u
On Thu, 16 Dec 2010, Keith Roberts wrote:
> Thanks for all the responses!
>
> I've read MaximumRPM from:
>
> http://www.rpm.org/max-rpm-snapshot/index.html
>
> Which helped me a great deal.
>
> I'll start a new thread regarding using RPM to build
> packages.
You'll find MaximumRPM will have taugh
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
> Is there such a thing yet?
No. @kbsingh and @centos on Twitter don't mention a finished centos6, let alone
a livecd.
Gruß/Regards,
Daniel Heitmann
XMPP: maledic...@jabber.ccc.de (OTR-preferred) | GnuPG-ID: B251006E
Blog: https://blog.horrendum.d
On Mon, 13 Dec 2010, John Hodrien wrote:
> To: CentOS mailing list
> From: John Hodrien
> Subject: Re: [CentOS] Stripping silent periods from MP3s
>
> On Mon, 13 Dec 2010, Keith Roberts wrote:
>
>> I know about audacity, but I want a command line tool that
>> will work overnight, on a batch of
On Wed, 15 Dec 2010, John Hodrien wrote:
> To: CentOS mailing list
> From: John Hodrien
> Subject: Re: [CentOS] Stripping silent periods from MP3s
>
> On Tue, 14 Dec 2010, Keith Roberts wrote:
>
>> If a package is installed, eg sox, the repo it came from is
>> no longer showing. It just says 'i
On Thu, 16 Dec 2010, ken wrote:
> To: CentOS Mailing List
> From: ken
> Subject: [CentOS] centos6 686 livecd iso
>
> Just did a few searches, trying to find a redhat or centos 6.x livecd
> iso, preferably an i686... but no joy. Maybe google's web crawlers
> haven't found the page yet. Anybody
On 12/16/2010 2:15 AM, Philix T A wrote:
> 1) RAID 1 is good for reading while writing is a overhead for the disk
> and may hit the performance
Unless you are doing something (such as video editing) that relies on
ultra-fast hard drive access, you will probably never notice the
difference. With h
On Thu, 16 Dec 2010, Marko Vojinovic wrote:
> I am open to any suggestions. :-)
I suggest you simply modified the user's prefs.js in their profile in
~/.mozilla.
// 0 = blank, 1 = home (browser.startup.homepage), 2 = last visited page, 3 =
resume previous browser session
// The behavior of opti
Just did a few searches, trying to find a redhat or centos 6.x livecd
iso, preferably an i686... but no joy. Maybe google's web crawlers
haven't found the page yet. Anybody here know where to find it?
tia,
ken
___
CentOS mailing list
CentOS@centos.o
yes, thanks, I will need to do a little reading. I just wanted to assure
that I'm on the right track and it's feasible. Chance has it that I found
two more unused disks of the same manufacture yesterday, so I will be
replacing with the same size today, anyway. But I know for next time ...
Kai
I assume you want to *forward* mail. As you seem to have no knowledge
about sendmail at all I suggest you install Webmin and administer your
mail addresses from there.
Kai
--
Get your web at Conactive Internet Services: http://www.conactive.com
__
On Thu, Dec 16, 2010 at 2:15 AM, Philix T A wrote:
> 2) Dont create RAID for swap and / root partition (Not Advisable)
Any rationale for this bad advice?
> 3) Swap Size size should be 2X the size of the Physical memory
For a desktop, maybe.
> 6) My experience had always shown if your apps
On Thu, 16 Dec 2010, Philix T A wrote:
> 1) RAID 1 is good for reading while writing is a overhead for the disk and
> may hit the performance
Write overhead is minimal, since you're just writing out the same data twice
to two equal performance drives (typically). I'd really not worry about the
p
On Wed, Dec 15, 2010 at 3:47 PM, Lanny Marcus wrote:
> I had installed Picasa,apparently properly, but am unable to launch
> the application. In the GNOME Desktop menu, Applications > Graphics >
> Picasa > Picasa it does not launch. Reinstalled it and the same issue.
>
> Reinstalling:
> picasa
Hi , guys :
I have a problem about the sendmail replay . The following is my condition:
I have installed the sendmail server on my laptop which installed CentOS
5.5 x86 64,
and I want to set up the sendmail replay.
That is to say . If my linux account called test and his mail address is
t...@
74 matches
Mail list logo
