On 12/12/16 20:07, Jerry Geis wrote:
> Hi all
>
> I downloaded the RPI3 image:
> CentOS-Userland-7-armv7hl-Minimal-1603-RaspberryPi3.img.xz
>
> how do I resize the root FS? My Sd card is 32G and I am only using 2G of
> that.
>
> also I thought the RPI3 as was 64 bit. When I downloaded the
> aar
Kk sir.
-Original Message-
From: CentOS [mailto:centos-boun...@centos.org] On Behalf Of John R Pierce
Sent: Tuesday, December 13, 2016 10:37 AM
To: centos@centos.org
Subject: Re: [CentOS] Install Centos not detect the hard drive
On 12/12/2016 8:55 PM, JEYARAJ wrote:
> I'm installing the
On 12/12/2016 07:50 PM, Phil Wyett wrote:
On Mon, 2016-12-12 at 18:46 -0800, Alice Wonder wrote:
Okay I found everything except the pdfs.tar in the 7.3 src.rpm - going
to try getting it built without that.
Hi,
Here is the current from 1611 updates folder on buildlogs server. It has
the file
On 12/12/2016 8:55 PM, JEYARAJ wrote:
I'm installing the Centos 7.0 from Intel 2u chassis server, Not detect the
hard disk.
Please help me sir.
Had drive --> Intel SSD -240 GB
insufficient information.
'intel 2u chassis server' could describe most anything. the size of
the chassis and the
Hi All,
I'm installing the Centos 7.0 from Intel 2u chassis server, Not detect the
hard disk.
Please help me sir.
Had drive --> Intel SSD -240 GB
Regards,
Jeyaraj. M
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo
On Mon, 2016-12-12 at 18:36 -0800, Alice Wonder wrote:
> Looking at http://vault.centos.org/ and not seeing them.
>
> I need to rebuild krb5
>
> At git.centos.org I can get the spec file, patches, etc. but the source
> are not there.
Hi,
You are seeing what is basically viewable in git, but to
On Mon, 2016-12-12 at 18:46 -0800, Alice Wonder wrote:
> Okay I found everything except the pdfs.tar in the 7.3 src.rpm - going
> to try getting it built without that.
>
Hi,
Here is the current from 1611 updates folder on buildlogs server. It has
the file you reference above.
http://buildlogs.
On 12/12/2016 06:49 PM, Frank Cox wrote:
On Mon, 12 Dec 2016 18:36:03 -0800
Alice Wonder wrote:
Looking at http://vault.centos.org/ and not seeing them.
7.3 is current, so check your friendly local mirror. The same place you
download your updated from.
Sources aren't in kernel.org mirror
On Mon, 12 Dec 2016 18:36:03 -0800
Alice Wonder wrote:
> Looking at http://vault.centos.org/ and not seeing them.
7.3 is current, so check your friendly local mirror. The same place you
download your updated from.
--
MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com
__
Okay I found everything except the pdfs.tar in the 7.3 src.rpm - going
to try getting it built without that.
On 12/12/2016 06:36 PM, Alice Wonder wrote:
Looking at http://vault.centos.org/ and not seeing them.
I need to rebuild krb5
At git.centos.org I can get the spec file, patches, etc. but
Looking at http://vault.centos.org/ and not seeing them.
I need to rebuild krb5
At git.centos.org I can get the spec file, patches, etc. but the source
are not there.
In particular it looks like I need krb5-1.14.1-pdfs.tar which isn't at
the MIT upstream that I can see and
nss_wrapper-0.0-2
I'm trying to setup OpenLDAP on CentOS7, in a provider/consumer
relationship. In general, provider/consumer is working quite well,
except when it comes to password policy.
Specifically, I want PwdFailureTime to be written to the provider from
one of the front end consumers when appropriate.
I'm l
Hi,
Sharing my experience upgrading my CentOS 7.2 to 7.3 this morning. I had
to use kernel-ml 4.8 for its support of Skylake on my Dell Precision
7510 laptop. This morning 4.9 came out but I don't felt like trying it,
because of the possibility of breaking my ZFS and nVIDIA stuff. So I
decided to
Hi Jerry,
> I downloaded the RPI3 image:
> CentOS-Userland-7-armv7hl-Minimal-1603-RaspberryPi3.img.xz
> how do I resize the root FS? My Sd card is 32G and I am only using 2G of
> that.
here is a copy of a mail I sent some weeks ago to the arm-dev list.
This mail assumes that you add a SSD to th
Hi all
I downloaded the RPI3 image:
CentOS-Userland-7-armv7hl-Minimal-1603-RaspberryPi3.img.xz
how do I resize the root FS? My Sd card is 32G and I am only using 2G of
that.
also I thought the RPI3 as was 64 bit. When I downloaded the
aarch64.img and tried that it did not boot.
I thought the RP
On 12/12/2016 07:48 AM, Jonathan Billings wrote:
> Old repodata? I suspect that since 7.3.1611 packages have been rolled out to
> mirrors, the CR repo is being depopulated with the same packages.
ilman/listinfo/centos
Very likely. CentOS 7.3 has just been released. There are a lot of
updates t
On 12/12/16 11:15 AM, pope...@chmail.ir wrote:
> i have 6 sata hdd 2 TB . i want install centos 7 on these hdd in raid 6
> mode.
>
> how can i do it ?
The RAID configuration of the new Anaconda is a little tricky. If you
can access the Red Hat documentation, it is covered in section 6.14;
ht
i have 6 sata hdd 2 TB . i want install centos 7 on these hdd in raid 6 mode.
how can i do it ?
___
CentOS mailing list
CentOS@centos.org
https://lists.centos.org/mailman/listinfo/centos
On Dec 12, 2016, at 10:32 AM, lejeczek wrote:
> I get:
>
> Failed to download prestodelta for repository cr: [Errno 256] No more mirrors
> to try.
> java-1.8.0-openjdk-1.8.0.111-2 FAILED
> http://mirror.centos.org/centos/7/cr/x86_64/Packages/java-1.8.0-openjdk-1.8.0.111-2.b15.el7_3.x86_64.rpm:
>
I get:
Failed to download prestodelta for repository cr: [Errno
256] No more mirrors to try.
java-1.8.0-openjdk-1.8.0.111-2 FAILED
http://mirror.centos.org/centos/7/cr/x86_64/Packages/java-1.8.0-openjdk-1.8.0.111-2.b15.el7_3.x86_64.rpm:
[Errno 14] HTTP Error 404 - Not Found
Trying other mirro
On Dec 11, 2016, at 10:01 PM, geo.inbox.ignored
wrote:
> - part 1: clock losing time
>
> first noticed time was off by 8 min, reset via F2 cl terminal.
>
> ~40 min later, off by ~2 min, reset via 'service manager' by stopping
> ntpd, count 20, started ntpd, within a few seconds, clock reset to
On 12/12/2016 07:29 AM, Gary Stainburn wrote:
On Monday 12 December 2016 12:15:10 David Both wrote:
The lm_sensors package is required for the sensors module of glances to
work. After installing lm_sensors, run sensors-detect. The sensors
command will show the sensors detected and their curren
On Monday 12 December 2016 12:15:10 David Both wrote:
> The lm_sensors package is required for the sensors module of glances to
> work. After installing lm_sensors, run sensors-detect. The sensors
> command will show the sensors detected and their current values. glances
> should then display the s
Le 12/12/2016 à 12:37, Gary Stainburn a écrit :
> Also, as this is a headless server, can anyone suggest a non-GUI monitor app?
Glances *is* a non-GUI app.
The banner of my blog is a screenshot of Glances in a terminal:
http://blog.microlinux.fr/
--
Microlinux - Solutions informatiques durable
The lm_sensors package is required for the sensors module of glances to
work. After installing lm_sensors, run sensors-detect. The sensors
command will show the sensors detected and their current values. glances
should then display the sensor readings.
On 12/12/2016 06:37 AM, Gary Stainburn w
On Monday 12 December 2016 11:01:52 Nicolas Kovacs wrote:
(first thing I'm going to do it buy a new keyboard, or employ a proof reader.
Sorry for all the errors folks)
>
> First thing I would do is check the temperature. In my experience,
> excessive heat is the main reason for unexpected shutdow
Am 10.12.2016 um 18:26 schrieb Nicolas Kovacs :
> Le 10/12/2016 à 17:54, Leon Fauster a écrit :
>> I need a comprehensive desktop search functionality. Not only
>> searching for file names but also for content and meta data. The
>> environment is EL6.8 / Gnome2. I have noticed that "beagle" is
>
Gary Stainburn wrote on 12/12/2016 11:50:
My priblem is that twice now it has turned itself off, the last time being at
7:40am today. There is nothing I can find in the logs prior to it going off,
just the normal start-up entries when it's turned back on.
If the PC turns off and stays off it
Le 12/12/2016 à 11:50, Gary Stainburn a écrit :
> A few weeks back I built a new Centos 7 server from a 4 year old workstation
> PC, and a brand new HDD.
>
> This PC had no prior problems other than it ran Windows 7. Thew new HDD is
> because I'm planning to also use it as a Bacula storage devic
A few weeks back I built a new Centos 7 server from a 4 year old workstation
PC, and a brand new HDD.
This PC had no prior problems other than it ran Windows 7. Thew new HDD is
because I'm planning to also use it as a Bacula storage device.
For the moment is purely an AirPrint server, using CUP
30 matches
Mail list logo
