and for debugging purposes)
Thanks,
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76710
Yes, I was thinking along those lines, but I thought I'd ask. THANKS!
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76710
-number
/sbin/iptables -I FORWARD -i external_interface -o internal_interface \
-p tcp -d telnetserverip --dport portnumberontelnetserver -j ACCEPT
after a reboot or firewall service restart it's gone again.
-vahur
Frank M. Ramaekers wrote:
What is the best way to temporarily setup a port relay
MTU:16436 Metric:1
RX packets:4910413 errors:0 dropped:0 overruns:0 frame:0
TX packets:4910413 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:908267443 (866.1 MiB) TX bytes:908267443 (866.1 MiB)
Frank M. Ramaekers Jr.
Systems
As was implied before, both interfaces are connected internally (IntrA-net) and
before I try the relay with VPN, I'm testing it on another internal computer
(just to eliminate any VPN potential problems).
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
Is this some sort of perl install/update requirement?
Frank M. Ramaekers Jr. | Systems Programmer | Information Technology
Thanks! That did the trick.
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of Luigi Rosa
Sent: Wednesday, December 21, 2011 2:58 PM
To: CentOS mailing list
Subject: Re: [CentOS] Yum update woes (perl
(no files). But if I mount this on a 5.7 VM, it
shows the files.
Ideas?
Frank M. Ramaekers Jr. | Systems Programmer | Information Technology |
American Income Life Insurance Company | 254-761-6649
_
This message contains information which
For some reason the install didn't ask:
1) What type of installation (Workstation, Sever, ...)
2) Network configuration parameters
It just starts installing.
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org
Had to increase the memory size, so it would go into a graphics install.
This caused it to prompt me for the type of Linux installation and
provide network (interface) information.
Wouldn't do this in text mode.
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun
: closed db environment /var/lib/rpm
What is going on here?
Frank M. Ramaekers Jr. | Systems Programmer | Information Technology |
American Income Life Insurance Company | 254-761-6649
_
This message contains information which is privileged
I need to write a script that will contact a remote system using TELNET
with VT52/1xx/2xx/320 and perform some operations. I am familiar with
TELNET but it appears that it won't work for my purposes.
TIA,
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
telnet
I've tried coding the expect with 0x0d:
expect
send m2
send \x0d
But, this doesn't seem to work.
I'm starting to run out of ideas.
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded
!= . ]
then
cd $MYSCRIPTDIR
fi
#--- FTP to MAINT on mkmfvm
$FTP -vn $$EOD
open $VMID
user $VMUser $VMPass
cd $VMDir
ascii
put $DataFile $VMFile
bye
$$EOD
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200
Good catchnot sure how I missed that! (Too many things going on.
THANKS!
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76710
Anyone have any idea as to why setroubleshootd would be dominating the
system:
PID USER PR NI VIRT RES SHR S %CPU %MEMTIME+ COMMAND
2371 root 25 0 1884m 1.8g 4100 R 100.2 44.7 680:06.40
setroubleshootd
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I
to remove the old version, but I also need to remove them from the
grub.conf. Any other considerations and/or methods?
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr
-92.1.18.el5
-rwxr-xr-x 1 root root 714752 Nov 12 2008
/boot/xen-syms-2.6.18-92.1.18.el5
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas
Nevermindfigured it out.
Thanks,
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76710
-Original Message-
From
MB 00:11
dag: [###
] 891/10953Segmentation fault
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of Lars Hecking
Sent: Tuesday, July 26, 2011 9:01 AM
To: centos@centos.org
Subject: [CentOS] yum segfault
: [##
] 891/10953Segmentation fault
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On Behalf Of
Matt
Sent: Tuesday, July 26, 2011 12:34 PM
To: CentOS mailing list
Subject: Re: [CentOS] Yum Issues ; Segmentation fault
I should
Disabled.
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76710
-Original Message-
From: centos-boun
Oh, I should mention:
# uname -a
Linux vmlnx000..com 2.6.9-78.0.8.EL #1 SMP Tue Nov 25 19:59:09
EET 2008 s390x s390x s390x GNU/Linux
CentOS 4.7
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
' that is not on my system?
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76701
,
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76701
Nope, found my problem after I pressed the send button. I found the
package and all is (almost) well.
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741
the problem?
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76701
, all httpd daemons running, no myphpadmin
remnants running. Can't find any problems in the httpd log files.
I've searched the web, but no applicable hits.
Anyone been there?
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co
Is there a way to get mail from a MS Exchange server that is addressed
as [EMAIL PROTECTED] rather than the [EMAIL PROTECTED] so that users on
host.domain.com can read their mail on that host (CentOS). (I'm
assuming that Exchange needs to know about host.domain.com, somehow.)
Frank M. Ramaekers
Either way...just as long as the mail gets to CentOs...although, I have
control over the CentOS box and NOT over the Exchange server.
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of Les Mikesell
Sent: Friday, April 11, 2008 10:50 AM
To: CentOS mailing list
Subject: Re: [CentOS] MS Exchange to CentOs (multiuser)
Frank M. Ramaekers wrote:
Is there a way to get mail from a MS Exchange
Ahgood catch. That worked great!
Frank M. Ramaekers Jr.
Systems Programmer MCP, MCP+I, MCSE RHCE
American Income Life Insurance Co. Phone: (254)761-6649
1200 Wooded Acres Dr.Fax: (254)741-5777
Waco, Texas 76710
-Original Message-
From
How can I remove this file?
-rw-r--r-- 1 rootroot 28707 Mar 31 12:31 --backup=numbered
I've tried a few different methods, but most attempts interprets the
file name as a switch (which it doesn't understand).
TIA,
Frank M. Ramaekers Jr. | Systems Programmer | Information
Ahhh...that's the ticket!
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of John R. Dennison
Sent: Wednesday, April 02, 2014 9:48 AM
To: centos@centos.org
Subject: Re: [CentOS] Removing a file that starts
rm: unrecognized option `--backup=numbered'
Try `rm ./'--backup=numbered'' to remove the file `--backup=numbered'.
Try `rm --help' for more information.
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of Laurent
Eero,
It has already been installed.
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of Eero Volotinen
Sent: Tuesday, October 27, 2015 5:16 PM
To: CentOS mailing list
Subject: Re: [CentOS] phpMyAdmin mbstring
Extension=mbstring.so
/etc/php.ini has:
:
extension_dir = "/etc/php.d"
:
Not sure where to go now.
Frank M. Ramaekers Jr. | Systems Programmer | Information Technology |
American Income Life Insurance | 254-761-6649
John,
Yeah, tried that, no improvement (same error message).
Thanks,
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of John R Pierce
Sent: Tuesday, October 27, 2015 5:40 PM
To: centos@centos.org
Subject: Re
/lib64/php/modules/"
This did the trick!
Thanks to all of those who contributed!
Frank M. Ramaekers Jr.
Systems Programmer; MCP, MCP+I, MCSE & RHCE
American Income Life Insurance Company
Phone: (254) 761-6649 Fax: (254) 741-5777
-Original Message-
From: centos-boun...
Yes, it does in /usr/lib64/php/modules/
Frank M. Ramaekers Jr.
-Original Message-
From: centos-boun...@centos.org [mailto:centos-boun...@centos.org] On
Behalf Of Frank Cox
Sent: Tuesday, October 27, 2015 5:30 PM
To: centos@centos.org
Subject: Re: [CentOS] phpMyAdmin mbstring extension
Followup:
I gave up on the Implicit and configured vsftpd for Explicit, that revealed
some configuration errors (displayed on the client, Filezilla in my case). I
then corrected these errors and switched back to Implicit and all is well.
Frank M. Ramaekers Jr.
-Original Message
Well, it was a couple of parameters.
chroot_username had an undefined user, and there was something else that I
can't seem to remember.
Best practice is to setup the Explicit FTPS first, get it working then add:
implicit_ssl=yes
listen_port=990
Frank M. Ramaekers Jr.
-Original Message
GNUTLS: REC[0x2aa440f42d0]: End of epoch cleanup
GNUTLS: REC[0x2aa440f42d0]: Epoch #0 freed
GNUTLS: REC[0x2aa440f42d0]: Epoch #1 freed
Closing control socket
TIA!
Frank M. Ramaekers Jr. | Systems Programmer | Information Technology | American
Income Life Insurance Company | 254-761-6649 (732
I can't seem to get phpMyAdmin working. I got the ip address problem
(permission) resolved, but now I'm getting a "Parallels H-Sphere" error "Error
404: File Not found". I've looked in all the logs and cannot determine what
file is not found.
Frank M. Ramaekers Jr.
I'm having some difficulty finding a method to shrink my /home to expand
my /. They both correspond to LVMs. It is my understanding that one
cannot shrink a xfs filesystem. One must back it up (xfsdump), remove
(lvremove) redefine it and then restore it back (xfsrestore).
Okay, I'm running
Yeah, I tried that but ran into a problem. It came up fine in
single-user/maintenance mode. The mount command shows all of the
mounted file systems, but after I 'chroot /sysroot', the mount failed
(with some problem with mtab, sorry don't have the exact error
message). So I couldn't mount
I'll try that...I was using instructions I found on the internet for
single-user/maintenance mode. From the grub screen you enter 'e' and
modify the linux16 line...etc.
Okay, I'll try that next.
Thanks Simon!
On 5/13/2020 7:28 AM, Simon Matter via CentOS wrote:
Hi,
Yeah, I tried that
Four problems below:
# dnf -y groupupdate "Core" "Minimal Install"
bintray-tvheadend-stable 0.0 B/s | 0 B 00:00
Failed to synchronize cache for repo 'bintray-tvheadend-stable',
ignoring this repo.
Last metadata expiration check: 0:03:11 ago on Sat 16 May 2020 12:30:47
PM CDT.
Error:
"telinit" was what I needed, thanks again!
-Frank
On 5/13/2020 12:05 PM, Frank M. Ramaekers Jr. wrote:
I'll try that...I was using instructions I found on the internet for
single-user/maintenance mode. From the grub screen you enter 'e' and
modify the linux16 line...etc.
Okay
when I try:
# dnf update grub2-common
Last metadata expiration check: 0:50:01 ago on Thu 27 Aug 2020 02:27:52
PM CDT.
Error:
Problem: The operation would result in removing the following
protected packages: kernel
(try to add '--allowerasing' to command line to replace conflicting
packages
Since I upgraded to CentOS8, I cannot get HandBrakeCLI to work:
# HandBrakeCLI
HandBrakeCLI: error while loading shared libraries: libass.so.5: cannot
open shared object file: No such file or directory
Googling this, it appears the error message is related to ffmpeg, but I
don't get any
I need to schedule a process/program every hour on the hour between 9am
and 4pm on the 2nd through the 9th of each month except on Saturday and
Sunday. So, I tried this entry:
0 9-16 2-9 * 1-5 ./myprog.sh
Unfortunately it runs outside of the 2nd through the 9th and still runs
on Sat.
52 matches
Mail list logo