dump/restore to do occasional full and
regular incremental backups, and for these, NFS is quite useful.
Not quite as simple as a dump restore, but duplicity works beatifully for
point in time backups...
Peter.
--
Censorship: noun, circa 1591. a: Relief of the burden of independent thinking
their
own products with licensing.
Peter.
--
Censorship: noun, circa 1591. a: Relief of the burden of independent thinking.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
for. They just want a progress meter of some form... A simple countdown
of package numbers would probably be sufficient.
Peter.
--
Censorship: noun, circa 1591. a: Relief of the burden of independent thinking.
___
CentOS mailing list
CentOS@centos.org
,
but upstream Fedora at least) have presto, and, yeah, it works great.
This is very different than the delta rpms though... delta rpms and all that
still works with a simple http server. For a mvcc you'd need a backend to have
an actual DB, scripting backend and such...
Peter.
--
Censorship: noun, circa
of
their spare time to develop centos, last thing you should talk about is
starting competing projects...
Peter.
--
Censorship: noun, circa 1591. a: Relief of the burden of independent thinking.
___
CentOS mailing list
CentOS@centos.org
http
SLC drives
here that from their manufacturer have been rated at 3 or more years of
100% write 24x7...
Peter.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 02/02/12 17:01, William Warren wrote:
On 2/2/2012 2:15 PM, Peter A wrote:
If you're worried about io reliability, then buy a (way more expensive)
SLC drive, rather than the consumer level MLC... We have some SLC drives
here that from their manufacturer have been rated at 3 or more years
Used Avail Use% Mounted on
/dev/md0 194M 32M 63M 34% /boot
THere are of course other reasons but those two are a common problem.
Peter.
On Wednesday 30 September 2009 16:59:25 Ryan Pugatch wrote:
Hi all,
Curious issue.. looking in to how much disk space is being used
the rev
F...
If you want to know the socket, you can run dmidecode. Look for the processor
section and under there Socket Information. Most boards (at least all but one
of the ones I'm running right now) provide you a proper socket identifier.
Peter.
--
Censorship: noun, circa 1591. a: Relief
and maintain.
Peter.
--
Censorship: noun, circa 1591. a: Relief of the burden of independent thinking.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
of zfs caches.
Finally, depending on the graphics card, you may not be able to get a
graphical login. But since you said your son wants to do cli f and knows all
the commands already, that wouldn't be such a big issue.
Peter.
On Tuesday 29 December 2009 17:36:28 Slack-Moehrle wrote:
Hi Peter
.
That's a good suggestion, even old scsi drives are much faster than the ide
disks and controller used in the Ultra5. Unfortunately we had some issues
running two 7200rpm SCSI disks in a U5 - the poor little box would overheat.
Peter.
--
Censorship: noun, circa 1591. a: Relief of the burden
is that a rsync
run (through ssh) took almost 50 minutes before, now its down to about 6
minutes. So max power for 6 minutes vs 50 minutes makes up for the 30%
increase in idle power...
Peter.
--
First they came for the machine guns,
and you didn't speak out because you didn't like guns
On 10/05/2013 11:39 AM, Eliezer Croitoru wrote:
Hey,
I was wondering about enterprise class drives:
Do you really expect the drive to be shipped to you before even a basic
validation test?
I would expect 24 or maybe 48 hours for a burn-in, but not 87 days.
Peter
remote script, rather than
giving that user global NOPASSWD access.
See sudoers(5) for details.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
, and I got an
error for the updates channel.
The error was: Metadata file does not match checksum
Is there an issue on this?
I saw something similar recently. Are you using a proxy?
Peter
___
CentOS mailing list
CentOS@centos.org
http
packaging software for my own systems and
those of my clients, this is both good and bad as it means there is no
upper limit to the sources of packages for CentOS, but it also means
that there is no lower limit to the quality of the same. Caution is
always advised when using a 3rd party repo.
Peter
to
grow both the logical volume and the fs, and it can be done live
provided the fs supports it.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
a swap file and it works just fine).
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
or LSB 3.2. I'm hoping that one of
those applies to CentOS 6.4.
yum install redhat-lsb
...then it will be compliant to LSB 4.0
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
agree the CLI program isn't very user friendly, but scripting it is
actually pretty easy, and I would hardly consider the minor effort of
writing a simple monitoring script to be reason for provisioning an
entire server.
Peter
___
CentOS mailing list
be sufficient but is probably a bad idea for other (obvious) reasons.
Find something else to attach the strap (or whatever) to and make sure
it's grounded.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 12/06/2013 01:24 PM, Fred Smith wrote:
Guys/Gals:
On 64bit 6.5, I've had to yum remove the Xiphos package because it was
causing errors in yum update, complaints about it requiring
libgtkhtml-editor.
It's in the gtkhtml3 package.
Peter
forgot), but to find
out:
rpm -qf /usr/lib64/libgtkhtml-editor.so{,.0,.0.0.0}
...so obviously they won't show up when you search yum for them.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
the final release has structural changes.
Yes, but this seems to indicate otherwise:
Within CentOS, we are going to do a CentOS7Beta1 build to match the
release upsteam
That said, there is, of course, no way to even speculate when CentOS 7
final will be released until upstream releases 7.
Peter
considering the rather unusual install method I used.
Problems with the mirrorlist, I had to comment it out and uncomment the
baseurl from the repo file to get yum to work. I think this is known
and will likely be resolved soon anyways.
Peter
On 12/13/2013 12:17 AM, Karanbir Singh wrote:
On 12/12/2013 11:03 AM, Peter wrote:
I've installed RHEL7 onto a Xen VM running off a CentOS 6 host.
this is a great test to have done. Would really like to hear comments
about process and result. I presume this is with the Xen4CentOS stack
On 12/13/2013 12:30 AM, Peter wrote:
Oh I forgot to mention the other issue, I'm running it under pvgrub (and
it works fine with a normal grub.conf file, btw, no need to install
grub2 that way), and I had to regenerate the initramfs, the one supplied
with the kernel did not come
On 12/13/2013 01:04 AM, Scott Robbins wrote:
On Fri, Dec 13, 2013 at 12:03:55AM +1300, Peter wrote:
On 12/12/2013 11:05 PM, Karanbir Singh wrote:
The core group includes NetworkManager and postfix, neither should be
core packages and should be excluded from a core or minimal install
};
#= sshd_net_t ==
allow sshd_net_t kernel_t:process sigchld;
Peter
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.15 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBAgAGBQJSqgUdAAoJEAUijw0EjkDvUv4H/0mpXttdzTV7ZfWtFiV+3nJF
Kd0wJ6hUxOJqiR
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 12/13/2013 08:20 AM, Daniel J Walsh wrote:
On 12/12/2013 01:49 PM, Peter wrote:
On 12/13/2013 02:45 AM, Daniel J Walsh wrote:
What SELInux issue did you have? What policy did you need to
add?
Unfortunately I've misplaced the audit logs
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 12/13/2013 09:26 AM, Peter wrote:
I actually do not think you need these, these were all caused by
the originally mislabeled system. If you remove your custom
policy, I bet it will work fine.
That makes sense. I will try removing them
On 12/14/2013 12:38 PM, Warren Young wrote:
On 12/13/2013 16:20, Michael Hennebry wrote:
Any ideas on how to proceed?
There may be a final screw under one of the stickers.
Yes, it looks to me like there should be a screw under the QC Pass
sticker, right under the round circle.
Peter
interfere with upstream compatibility, and CentOS likely already has the
infra in place to do a 32 bit build from prior versions. Since Fedora
still fully supports 32 bit, right up to rawhide it's reasonable to
assume that the RedHat sources should build to 32 bit without too much fuss.
Peter
On 12/16/2013 12:21 PM, Michael Hennebry wrote:
On Sat, 14 Dec 2013, Peter wrote:
On 12/14/2013 12:38 PM, Warren Young wrote:
On 12/13/2013 16:20, Michael Hennebry wrote:
Any ideas on how to proceed?
There may be a final screw under one of the stickers.
Yes, it looks to me like
it with a known good one.
At any rate, I would be very careful with the mm, a charged cap can
damage it.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 12/18/2013 11:49 PM, JEWEL AHMMED wrote:
If my file is very big, do i loss my server performance ?
My vps is 512 MB RAM.. So ?
You're newer to a lot more than just Linux if you think that log files
use up RAM.
RAM != Disk space.
Peter
On 12/19/2013 12:33 AM, JEWEL AHMMED wrote:
But, When my server handle a big file ..
Maybe, It's use more Ram memory.
so, what you thinking now ? :D
I'm thinking that you have no idea what you're talking about and you're
trying to solve a non-issue.
Peter
version and
see if it helps, and if it doesn't then you may be stuck with either
dual-booting or running a VM with windoze in order to access that
government website. You may also want to look into laws regarding equal
access to government resources in your area.
Peter
On 01/03/2014 10:16 AM, Eero Volotinen wrote:
Hi,
Is there nice way to put back EC encryption on Centos?
Yes, yum update should do it.
RHEL disabled it due patent issues
RedHat no longer disables the EC ciphers as of RHEL6.5
Peter
___
CentOS
On 01/05/2014 08:28 PM, James B. Byrne wrote:
RPM build errors:
error: Installed (but unpackaged) file(s) found:
...
/usr/bin/apu-1-config
...
%{_bindir}/apr-u-config
apu-l != apr-u
Peter
___
CentOS mailing list
CentOS@centos.org
http
almost certainly does
not want.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
just going separate ways. If this were to
happen then CentOS would be no worse off than it was before the move to
RedHat in the first place.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
: eth0: ...
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
easy to change, I can't recall off the top of
my head where it is, though.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 01/23/2014 07:15 AM, Michael Hennebry wrote:
That said, it has fewer connectors.
I had to leave off my CD and floppy drives.
I have yet to see a power supply that doesn't have connectors for these,
but you can get adapters and/or splitters for that if need be.
Peter
On 01/23/2014 10:59 PM, Peter wrote:
On 01/23/2014 07:15 AM, Michael Hennebry wrote:
That said, it has fewer connectors.
I had to leave off my CD and floppy drives.
I have yet to see a power supply that doesn't have connectors for these,
but you can get adapters and/or splitters
On 01/24/2014 03:47 AM, Michael Hennebry wrote:
On Thu, 23 Jan 2014, Peter wrote:
it has four molex four pin connectors any one of which should be
suitable for your CD drive, and one floppy connector which should work
for your floppy drive just fine.
I needed the floppy connector for my
space ont eh volume group, then use LVM snapshots,
mount the snapshots in the dom0 and take your backup off of those. A
good program which I have recently come across for taking the actual
backup is backuppc.
Peter
___
CentOS mailing list
CentOS
create a logical
volume (LV) that is as big as you think you will need, but it doesn't
need to be too big, it is easy to grow the LV later on if you need to.
As I said before, make sure you leave some free space on the VG for
snapshots.
Peter
___
CentOS
2% /openvpn
anticipating the creation of an openvpn - ldap - and mailserver.
You cannot have those mounted in the dom0 and domU at the same time, the
domU will refuse to start and if you manage it you will end up with
filesystem corruption.
Peter
On 02/20/2014 09:54 PM, Kristoffer Rath Hansen wrote:
What version of OpenSSL will CentOS 7 ship with?
From RHEL7 beta:
1:openssl-1.0.1e-23.el7.x86_64
CentOS 7 will be the same.
Peter
___
CentOS mailing list
CentOS@centos.org
http
are not in vault (as vault is for
older archived stuff).
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
a core install of RHEL7 beta without NM and it runs
just fine.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
nature of being
public doesn't really matter if it gets leaked. No vulnerability on the
server can expose a private client certificate, only a vulnerability on
the client can.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman
that
address this issue.
That should not be an issue for CentOS as CentOS does not support old
point releases. The simple answer is if you update to the latest 6.x
you are not vulnerable.
RedHat has to address this because they do have support for staying on a
particular point release.
Peter
in the dom0. You can backup without shutting down the
domain from the dom0 if you want if you use LVM and just take a
snapshot, then just mount the snapshot and backup from there.
Peter
On 05/15/2014 05:39 AM, Simon Banton wrote:
Dear all,
I look after a number of CentOS 4.x servers running
/sysconfig/networking-scripts/eth0
as stated before, the file name should be ifcfg-eth0.
...and the directory network-scripts.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
that regardless of what you do that file has to be
downloaded in order to be displayed in any capacity.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 07/28/2014 09:03 PM, Shital Sakhare wrote:
Thanks Peter,
But I get it resolved. The setting is in Apache server itself. By adding
rewrite rule into apache or .htaccess. Below is the code and it worked.
RewriteCond %{HTTP_REFERER} !^%{HTTP_HOST}$ [NC]
On Mon, Jul 28, 2014 at 2:05 PM
On 09/27/2014 10:29 AM, Eero Volotinen wrote:
uh. is this system even patched for heartbleed?
EL5 was never vulnerable to heartbleed to begin with, that said, your
point is still valid as to other vulnerabilities.
Peter
___
CentOS mailing list
CentOS
-drv-intel
You never mentioned which version of CentOS you're trying to install.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
with this.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
.
Note that newer controllers use a type of flash memory instead of a BBU.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
tcp
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 10/30/2014 04:16 PM, Jason T. Slack-Moehrle wrote:
yes, so I just figured out. Thank you so much. Where does `semanage` come
from? I tried policycoreutils-python but it cannot be found.
It should be in policycoreutils-python. Try:
yum provides \*bin/semanage
Peter
by adding the following
line to the bottom of /etc/wgetrc:
retr-symlinks=on
Doing so will basically accomplish exactly the same thing that this
update does.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 10/31/2014 11:54 AM, Negative wrote:
One option now is to install XFCE, but I don't know how that works.
That's actually pretty easy:
yum install epel-release
yum install @xfce
Then you just change your desktop environment to xfce at the login screen.
Peter
of the 32-bit
hardware was of very high quality, and still runs perfectly. I'd hate
to spend a few hundred dollars each to replace all those systems.
I can understand this from RedHat's perspective, CentOS is workign on a
32 bit build, but it takes time.
Peter
of a 32 bit app vs 64 bit one can be significant. These would
still be running on 64 bit hardware but using a 32 bit OS *on purpose*.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
of extra
packages on your system, it should just remove libevent-last and replace
it with libevent, if it tries to do more then don't accept the changes,
report back here instead.
When that's done you should be able to issue a yum update.
Peter
those libraries to C6
in a 3rd-party repository. This should be doable without conflicting
with the existing older libs in C6.
At this point Chrome should be install-able from their own repo without
having to pull any further stunts.
Peter
___
CentOS
to create an selinux
policy to get it to work, so that may very well be your issue.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
and re-signing the message with it's own DKIM key in order
to be accepted more widely.
It also doesn't help that centos.org does *not* have an SPF record.
So let's stop ragging on James, he's done what he should be doing and
it's the CentOS server that has mucked things up here.
Peter
On 11/16/2014 11:11 AM, Karanbir Singh wrote:
2) what is the
lists.centos.org machine doing with DKIM and what is the larger fix for
each of those things.
Did you get the off-list email I sent a couple days ago irt this?
Peter
___
CentOS mailing
on the server with just a
few config changes.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
be possible to rewrite this with
header_checks as well. I would tack @centos.org onto the end of the
domain and call it a day.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 11/18/2014 02:50 PM, Fred Smith wrote:
But I don't think that's what I want. I want it to mount when the system
boots, but if for some reason it is not powered on, I don't want it to
hang up the whole boot process.
You want the nofail option.
Peter
On 11/19/2014 04:24 PM, Ted Miller wrote:
Didn't the nofail option disappear from Centos 7?
That would be news to me, and it would be a serious loss of
functionality if it did.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org
domu support.
uname -a
Linux bulkley.bvserver.ca 2.6.18-400.el5xen #1 SMP Thu Dec 4 13:29:23
EST 2014 x86_64 x86_64 x86_64 GNU/Linux
This is kernel-xen, note the el5xen in the name as opposed to el5 in
the one you installed above.
Peter
___
CentOS
to a kernel on the dom0?
Also paste the output of this command from the affected domain:
rpm -q kernel kernel-xen
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
kernel-xen-2.6.18-400.el5
kernel-xen-2.6.18-400.1.1.el5
It is as I suspected, you've been installing both kernel and kernel-sen
the entire time.
paste the contents of /etc/grub.conf and then I can give you a proper
answer about what to do.
Peter
___
CentOS
domains as well as
HVM domains that run the pv drivers.
I converted a xen vm to kvm and got that error for the above reason.
Yes you would remove those when converting to a KVM vm but please do not
remove them if you are running a Xen vm.
Peter
___
CentOS
for that?
Linode does as well, and you have to jump through hoops to get it
enabled properly.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
. and provide a link to the original. If the document
is modified, all Red Hat trademarks must be removed.
I'd say that's good enough.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
that it
reflects the differences in CentOS.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 02/19/2015 11:58 PM, Niki Kovacs wrote:
What would be an orthodox way of handling this? Put
net.ipv4.ip_forward=1 in /etc/sysctl.conf?
Yes.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
them here or in
#ghettoforge on FreeNode IRC.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 01/08/2015 12:16 PM, Chuck Campbell wrote:
Peter,
thank you, I was guessing this is what might be needed, and I appreciate the
heads up on what to expect when I do the update.
The resolution I achieved is a bit more convoluted, but it consists of the
following, and remains consistent
... no
checking db_185.h presence... no
checking for db_185.h... no
*checking for Berkeley DB... not found*
You're missing a -devel package. You should be building this in mock,
then it will install the correct deps for you in a clean build environment.
Peter
.conf.all.disable_ipv6=1
net.ipv6.conf.default.disable_ipv6=1
net.ipv6.conf.eth0.disable_ipv6=1
and then run: service network restart
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 03/10/2015 08:59 AM, Robert Moskowitz wrote:
error: net.ipv6.conf.eth0.disable_ipv6 is an unknown key
s/eth0/your_interface_name/
...or just leave it out, it will probably work with one, or both of the
other two.
Peter
___
CentOS mailing list
this string to
see if they match.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
until today.
Peter
-BEGIN PGP SIGNATURE-
Version: GnuPG v1
iQEcBAEBAgAGBQJVG2HJAAoJEAUijw0EjkDvUrQH/0DUWjv47cdeqLzL7yCYoYnN
ZORI3pkQsXPxLmqNOtLZ2MSiNTUyNJiUrfyWXazzBtiCrc4w7llQ4XGnEcKFlgie
dz9EHvDpgtu/lSqEJpFVf7CROy93zeanWwkc7U8QASxznyVRxOvLbekYBizT49SP
lhSkvKcVG
to connect (mail.example.com) and so can have the same commonname.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On 02/26/2015 07:23 AM, Niki Kovacs wrote:
I wonder if there's an easy way to strip down an installation to the
bare minimum, e. g. the packages you get when you select minimum
installation.
I haven't tried this, but see if it works:
yum shell
remove *
install @minimal
run
Peter
://buildlogs.centos.org/c7.00.02/ or
point it to the puias repos.
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
with CentOS 5 and focus on
moving to CentOS 6 or 7 as a medium (not long) term goal. At the end of
the day I think it's better to just go this route than have to deal with
the hacky solutions for getting 1.1 and 1.2 out of CentOS 5.
Peter
___
CentOS
On 04/02/2015 03:29 AM, Lamar Owen wrote:
On 03/31/2015 11:11 PM, Peter wrote:
Can you please point me to the centos-devel thread that discussed
changing the iso naming convention from CentOS-7.1-1503-x86_64-DVD.iso
to CentOS-7-x86_64-DVD-1503.iso? I must have missed it because I saw
/bin/R: unless $i++'
path/to/R/scripts/*.R
Peter
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
1 - 100 of 1058 matches
Mail list logo