and to see the right parameters.
Regards
Jens
-Original Message-
From: Tony Liu
Sent: 10. februar 2021 22:59
To: David Orman
Cc: Jens Hyllegaard (Soft Design A/S) ;
ceph-users@ceph.io
Subject: Re: [ceph-users] Re: db_devices doesn't show up in exported osd
service spec
quot;AND\", \"objectstore\":
\"bluestore\"}}}"}]: dispatch audit 2021-02-07T00:45:38.152756+
mon.ceph-control-1 (mon.0) 108 : audit [INF] from='mgr.24142551 '
entity='mgr.ceph-control-1.nxjnzz' cmd='[{"prefix":"config-key
set","key":"mgr/cephadm
Hi.
I have the same situation. Running 15.2.8
I created a specification that looked just like it. With rotational in the data
and non-rotational in the db.
First use applied fine. Afterwards it only uses the hdd, and not the ssd.
Also, is there a way to remove an unused osd service.
I manages
Hi.
We are trying to set up an NFS server using ceph which needs to be accessed by
an IBM System i.
As far as I can tell the IBM System i only supports nfs v. 4.
Looking at the nfs-ganesha deployments it seems that these only support 4.1 or
4.2. I have tried editing the configuration file to
-users@ceph.io
Subject: [ceph-users] Re: Unable to use ceph command
Hi,
Am 26.01.21 um 14:58 schrieb Jens Hyllegaard (Soft Design A/S):
>
> I am not sure why this is not working, but I am now unable to use the ceph
> command on any of my hosts.
>
> When I try to launch ceph, I ge
Hi Chris
Having also recently started exploring Ceph. I too happened upon this problem.
I found that terminating the command witch ctrl-c seemed to stop the looping.
Which btw. also happens on all other mgr instances in the cluster.
Regards
Jens
-Original Message-
From: Chris Read
: Eugen Block
Sent: 26. januar 2021 15:43
To: ceph-users@ceph.io
Subject: [ceph-users] Re: Unable to use ceph command
Do you have mon containers running so they can form a quorum? Do your hosts
still have a (at least) minimal ceph.conf?
Zitat von "Jens Hyllegaard (Soft Design A/S)" :
&
Hi.
I am not sure why this is not working, but I am now unable to use the ceph
command on any of my hosts.
When I try to launch ceph, I get the following response:
[errno 13] RADOS permission denied (error connecting to the cluster)
The web management interface is working fine.
I have a
Block
Sent: 21. december 2020 11:40
To: Jens Hyllegaard (Soft Design A/S)
Cc: ceph-users@ceph.io
Subject: Re: [ceph-users] Re: Setting up NFS with Octopus
Hi,
> I am still not sure if I need to create two different pools, one for
> NFS daemon and one for the export?
the pool (and/or nam
status? The permissions seem correct, maybe the OSDs have a
problem?
Zitat von "Jens Hyllegaard (Soft Design A/S)" :
> I have tried mounting the cephFS as two different users.
> I tried creating a user obuser with:
> fs authorize objstore client.objuser / rw
>
> A
. december 2020 13:25
To: Jens Hyllegaard (Soft Design A/S)
Cc: 'ceph-users@ceph.io'
Subject: Re: [ceph-users] Re: Setting up NFS with Octopus
Sorry, I was afk. Did you authorize a client against that new cephfs volume?
I'm not sure because I did it slightly different and it's an upgraded cluster
I found out how to get the information:
client.nfs.objstore.ceph-storage-3
key: AQBCRNtfsBY8IhAA4MFTghHMT4rq58AvAsPclw==
caps: [mon] allow r
caps: [osd] allow rw pool=objpool namespace=nfs-ns
Regards
Jens
-Original Message-
From: Jens Hyllegaard (Soft Design A/S
I am sorry, but I am not sure how to do that? We have just started working with
Ceph.
-Original Message-
From: Eugen Block
Sent: 18. december 2020 12:06
To: Jens Hyllegaard (Soft Design A/S)
Subject: Re: [ceph-users] Re: Setting up NFS with Octopus
Oh you're right, it worked for me
Hi.
We are completely new to Ceph, and are exploring using it as an NFS server at
first and expand from there.
However we have not been successful in getting a working solution.
I have set up a test environment with 3 physical servers, each with one OSD
using the guide at:
14 matches
Mail list logo