@min chen
Thanks for your reply.
I am using 0.72.2 and avoiding cephfs as it is not termed as a
production ready in this version.
I plan to use only Rados gateway for object storage.I checked the
documentation of Ceph and observerd that the concept of OID (as an
Integer, or to establishes
Hi, I removed one of the monitor in the cluster (having 4 monitors previously),
after 20 mins, the result of # ceph -s still contains ...a mons down Is
it a common behavior? Does Ceph need so long to remove the monitor thoroughly?
# ceph -s
cluster 564a10da-5a0e-4a5f-ae64-a769995217c9
Hi,
I'm trying to run the ceph_rest_api module as a WSGI application behind
Apache with mod_wsgi but I'm struggling a bit.
Not having used WSGI that much I'm stuck on the .wsgi file. Has anybody
done this before?
I've been reading the Flask [0] and Ceph [1] docs, but it's not clear to
me
Unfortunately, we didn't start building packages for RHEL6 until
recently, and we would (historically) point CentOS and RHEL (and
Scientific Linux too)
to the `el6` repo.
There is nothing regardless of what the admin host has in its repo files.
The way around this problem is to specify directly
HI all,
Recently I was playing with crushmaps. I would like to know the difference
between step choose and step chooseleaf.
when I used :
ruleset rule1{
...
step take default
step choose firstn 0 host
step emit
}
And I tested above using crushtool, it returned ids of bucket host.
But when
There are two different modes of accessing the buckets.The upload domain and
the download domain are the same.
GET /mybucket HTTP/1.1
Host: cname.domain.com
GET / HTTP/1.1
Host: mybucket.cname.domain.com
Now I want to distinguish them. The reason that I want to do this is:
I have two ceph
There is no simultaneous support in ceph-deploy as this is something
that is not needed for users setting up a cluster to try out
ceph (the main objective of ceph-deploy)
However, there have been users that used scripts that can call
ceph-deploy in parallel so it might be possible to do so.
For
Thanks for reply!
At 2014-05-27 22:13:19,Wido den Hollander w...@42on.com wrote:
On 05/27/2014 04:10 PM, wsnote wrote:
There are two different modes of accessing the buckets.The upload domain
and the download domain are the same.
GET /mybucket HTTP/1.1
Host: cname.domain.com
GET / HTTP/1.1
On 5/23/14 16:20 , Cédric Lemarchand wrote:
Out of curiosity, what's the current beef with zfs? I know what
problems are cited for btrfs, but I haven't heard much about zfs lately.
The Linux implementation (ZoL) is actually stable for production, but is quiet
memory hungry because of a
On Mon, May 26, 2014 at 5:22 AM, JinHwan Hwang calanc...@gmail.com wrote:
I'm trying to install ceph 0.80.1 on ubuntu 14.04. All other things goes
well except 'activate osd' phase. It tells me they can't find proper fsid
when i do 'activate osd'. This is not my first time of installing ceph,
I'd love to know how people are deploying their production clouds now. I've
heard mixed answers about whether or not the right way is with ceph-deploy,
or manual deployment. Are people using automation tools like puppet or ansible?
Donald Talton
Cloud Systems Development
Cisco Systems
Are people using automation tools like puppet or ansible?
http://www.sebastien-han.fr/blog/2014/05/01/vagrant-up-install-ceph-in-one-command/
enjoy ;)
- Mail original -
De: Don Talton (dotalton) dotal...@cisco.com
À: ceph-users@lists.ceph.com
Envoyé: Mardi 27 Mai 2014 18:19:00
Hi all,
I read a lot of emails messages and I am confused because in some public
network in /etc/ceph/ceph.com is reported like :
public_network = a.b.c.d/netmask
in others like :
public network = a.b.c.d/netmask
Does it depend by ceph version ?
Ragards
Ignazio
Hi,
I am setting up a ceph cluster for some experimentation. The cluster is
setup successfully. But, When I try running rbd map on the host, the kernel
crashes(system hangs) and I need to do a hard reset for it to recover.
Below is my setup.
All my nodes have Linux kernel 3.5 with
Hi,
I have faced a similar issue. This happens if the ceph disks aren't
purged/cleaned completely. Clear of the contents in the /dev/sdb1 device.
There is a file named ceph_fsid in the disk which would have the old
cluster's fsid. This needs to be deleted for it to work.
Hope it helps.
Sharmila
On 5/27/14 09:19 , Don Talton (dotalton) wrote:
I'd love to know how people are deploying their production clouds now. I've heard mixed
answers about whether or not the right way is with ceph-deploy, or manual
deployment. Are people using automation tools like puppet or ansible?
Donald
I am seeing the same error message with ceph health command. I am using Ubuntu
14.04 with ceph 0.79. I am using the ceph distribution that comes with the
Ubuntu release. My configuration is
1 x mon
1x OSD
Both the OSD and mon are on the same host.
rsudarsa@rsudarsa-ce1:~/mycluster$ ceph -s
On 05/27/2014 10:30 AM, Craig Lewis wrote:
A ZFS snapshot is atomic, but it doesn't tell the daemons to flush their
logs to disk. Reverting to a snapshot looks the same as if you turned
off the machine by yanking the power cord at the instant the snapshot
was taken.
That sounds more
Hi Shashank,
I think you should use rados -p pool_name ls to list all objects in
pool_name,
if there is a image in pool_name , like this :
root@ceph0:~# rados -p testpool ls
rb.0.1017.6b8b4567.1806
rb.0.1017.6b8b4567.0f32
rb.0.1017.6b8b4567.1b5b
Hi !
I have failover clusters for some aplications. Generally with 2 members
configured with Ubuntu + Drbd + Ext4. For example, my IMAP cluster works
fine with ~ 50k email accounts and my HTTP cluster hosts ~2k sites.
See design here: http://adminlinux.com.br/cluster_design.txt
I would like
subscribe ceph-us...@ceph.com___
ceph-users mailing list
ceph-users@lists.ceph.com
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
On Tue, May 27, 2014 at 9:04 PM, Sharmila Govind
sharmilagov...@gmail.com wrote:
Hi,
I am setting up a ceph cluster for some experimentation. The cluster is
setup successfully. But, When I try running rbd map on the host, the kernel
crashes(system hangs) and I need to do a hard reset for it
On Tue, May 27, 2014 at 9:55 AM, Ignazio Cassano
ignaziocass...@gmail.com wrote:
Hi all,
I read a lot of emails messages and I am confused because in some public
network in /etc/ceph/ceph.com is reported like :
public_network = a.b.c.d/netmask
in others like :
public network =
On Sun, May 25, 2014 at 6:24 PM, Guang Yang yguan...@yahoo.com wrote:
On May 21, 2014, at 1:33 AM, Gregory Farnum g...@inktank.com wrote:
This failure means the messenger subsystem is trying to create a
thread and is getting an error code back — probably due to a process
or system thread
Hi
First apologies if this is the wrong place to ask this question.
We are running a small Ceph (0.79) cluster will about 12 osd's which are
on top of a zfs raid 1+0 (for another discussion)... which were created
on this version.
Below I have included the ceph health detail which has rather
Hi Peter,
Please use ceph pg repair XX.xx. It might take a few seconds to kick
in after being instructed.
-Michael
On 27/05/2014 21:40, phowell wrote:
Hi
First apologies if this is the wrong place to ask this question.
We are running a small Ceph (0.79) cluster will about 12 osd's which
Hi,
Under normal conditions one OSD on one host is not enough to get a
cluster healthy. You'd need a minimum of one OSD on three hosts to get
clean.
Your OSD dump shows *replicated size 3 min_size 2* so that's healthy
at 3 copies of data, not healthy at two copies but still usable, cluster
On 5/27/14 13:40 , phowell wrote:
Hi
First apologies if this is the wrong place to ask this question.
We are running a small Ceph (0.79) cluster will about 12 osd's which
are on top of a zfs raid 1+0 (for another discussion)... which were
created on this version.
Just a reminder to
Note that while the repair command *will* return your cluster to
consistency, it is not guaranteed to restore the data you want to see
there — in general, it will simply put the primary OSD's view of the
world on the replicas. If you have a massive inconsistency like that,
you probably want to
Would it be feasible to try for an odd one out policy by default when
repairing from a pool of 3 or more disks? Or is the most common cause of
inconsistency most likely to not effect the primary?
-Michael
On 27/05/2014 23:55, Gregory Farnum wrote:
Note that while the repair command *will*
In practice, it's not a big deal. Just deploy your disks sequentially,
and Ceph will sort it out.
Sure, you'll waste a bit of time watching data copy to a new disk, only
to see it get remapped it to a newer disk. It's a small period of time
relative to how long it's going to take to remap
Yeah, there are a lot of smarts like that which could be added in.
-Greg
Software Engineer #42 @ http://inktank.com | http://ceph.com
On Tue, May 27, 2014 at 4:17 PM, Michael mich...@onlinefusion.co.uk wrote:
Would it be feasible to try for an odd one out policy by default when
repairing from
Hi,
I've got 16 nodes cluster ssd only. Each node is 6x600GB, 10Gbit uplink.
We're using Intel 320 series. Cluster is running now half year as
production and no problems with ssds.
Replication x3 (main DC) and x2 in backup DC (10 nodes cluster there = less
space).
From what I've notice it's
On 5/22/14 00:26 , Craig Lewis wrote:
On 5/21/14 21:15 , Sage Weil wrote:
On Wed, 21 May 2014, Craig Lewis wrote:
If you do this over IRC, can you please post a summary to the mailling
list?
I believe I'm having this issue as well.
In the other case, we found that some of the OSDs were
For certain security issue, I need to make sure the data finally saved to
disk is encrypted.
So, I'm trying to write a rados class, which would be triggered to reading
and writing process.
That is, before data is written, encrypting method of the class will be
invoked; and then after data is
Thanks IIya. I upgraded the Kernel and it worked :-)
Thanks,
Sharmila
On Tue, May 27, 2014 at 11:26 PM, Ilya Dryomov ilya.dryo...@inktank.comwrote:
On Tue, May 27, 2014 at 9:04 PM, Sharmila Govind
sharmilagov...@gmail.com wrote:
Hi,
I am setting up a ceph cluster for some
Hi, everyone!
I am trying to use Admin Ops API.
In the document, there is a statement:
An admin API request will be done on a URI that starts with the configurable
‘admin’ resource entry point.
My question is: where is the configure of 'admin' and what is the default value?
37 matches
Mail list logo