You could try a 'rados get' and then a 'rados put' on the object to start with.
On Thu, Nov 15, 2018 at 4:07 AM K.C. Wong wrote:
>
> So, I’ve issued the deep-scrub command (and the repair command)
> and nothing seems to happen.
> Unrelated to this issue, I have to take down some OSD to prepare
>
So, I’ve issued the deep-scrub command (and the repair command)
and nothing seems to happen.
Unrelated to this issue, I have to take down some OSD to prepare
a host for RMA. One of them happens to be in the replication
group for this PG. So, a scrub happened indirectly. I now have
this from “ceph
Thanks, Ashley.
Should I expect the deep-scrubbing to start immediately?
[root@mgmt01 ~]# ceph pg deep-scrub 1.65
instructing pg 1.65 on osd.62 to deep-scrub
[root@mgmt01 ~]# ceph pg ls deep_scrub
pg_stat objects mip degrmispunf bytes log disklog state
state_stamp v
On Mon, Nov 12, 2018 at 4:21 PM Ashley Merrick wrote:
>
> Your need to run "ceph pg deep-scrub 1.65" first
Right, thanks Ashley. That's what the "Note that you may have to do a
deep scrub to populate the output." part of my answer meant but
perhaps I needed to go further?
The system has a
Your need to run "ceph pg deep-scrub 1.65" first
On Mon, Nov 12, 2018 at 2:20 PM K.C. Wong wrote:
> Hi Brad,
>
> I got the following:
>
> [root@mgmt01 ~]# ceph health detail
> HEALTH_ERR 1 pgs inconsistent; 1 scrub errors
> pg 1.65 is active+clean+inconsistent, acting [62,67,47]
> 1 scrub
Hi Brad,
I got the following:
[root@mgmt01 ~]# ceph health detail
HEALTH_ERR 1 pgs inconsistent; 1 scrub errors
pg 1.65 is active+clean+inconsistent, acting [62,67,47]
1 scrub errors
[root@mgmt01 ~]# rados list-inconsistent-obj 1.65
No scrub information available for pg 1.65
error 2: (2) No such
What does "rados list-inconsistent-obj " say?
Note that you may have to do a deep scrub to populate the output.
On Mon, Nov 12, 2018 at 5:10 AM K.C. Wong wrote:
>
> Hi folks,
>
> I would appreciate any pointer as to how I can resolve a
> PG stuck in “active+clean+inconsistent” state. This has
>
Hi folks,
I would appreciate any pointer as to how I can resolve a
PG stuck in “active+clean+inconsistent” state. This has
resulted in HEALTH_ERR status for the last 5 days with no
end in sight. The state got triggered when one of the drives
in the PG returned I/O error. I’ve since replaced the