The only communication on the cluster network is between osds. All other
traffic for clients, mons, MDS, etc is on the public network. The cluster
network is what the osds use to backfill, recover, sent replica copies of
your data to the secondary osds, read parts of EC objects before the
primary s
I found a fix: It is *mandatory *to set the public network to the same
network the mons use.
Skipping this while the mon has another network interface, saves garbage to
the monmap.
- Kevin
2018-02-23 11:38 GMT+01:00 Kevin Olbrich :
> I always see this:
>
> [mon01][DEBUG ] "mons": [
> [mon01]
I always see this:
[mon01][DEBUG ] "mons": [
[mon01][DEBUG ] {
[mon01][DEBUG ] "addr": "[fd91:462b:4243:47e::1:1]:6789/0",
[mon01][DEBUG ] "name": "mon01",
[mon01][DEBUG ] "public_addr": "[fd91:462b:4243:47e::1:1]:6789/0",
[mon01][DEBUG ] "rank": 0
[mon01]
Hi!
On a new cluster, I get the following error. All 3x mons are connected to
the same switch and ping between them works (firewalls disabled).
Mon-nodes are Ubuntu 16.04 LTS on Cep Luminous.
[ceph_deploy.mon][ERROR ] Some monitors have still not reached quorum:
[ceph_deploy.mon][ERROR ] mon03
aemon /var/run/ceph/ceph-mon.shambhucephnode2.asok mon_status
[ceph_deploy.mon][WARNIN] mon.shambhucephnode2 monitor is not yet in quorum,
tries left: 3 [ceph_deploy.mon][WARNIN] waiting 10 seconds before retrying
[shambhucephnode2][INFO ] Running command: sudo ceph --cluster=ceph
--admin-dae
,
tries left: 4
[ceph_deploy.mon][WARNIN] waiting 10 seconds before retrying
[shambhucephnode2][INFO ] Running command: sudo ceph --cluster=ceph
--admin-daemon /var/run/ceph/ceph-mon.shambhucephnode2.asok mon_status
[ceph_deploy.mon][WARNIN] mon.shambhucephnode2 monitor is not yet in quorum,
trie
On Mon, May 22, 2017 at 7:07 AM, Shambhu Rajak wrote:
> Hi Cephers,
>
> I am trying to install ceph-Jewel for a 3 node cluster with monitors on each
> host.
>
>
>
> I have followed:
> http://docs.ceph.com/docs/master/start/quick-start-preflight/
>
>
> http://docs.ceph.com/docs/master/start/quick-c
Hi Cephers,
I am trying to install ceph-Jewel for a 3 node cluster with monitors on each
host.
I have followed: http://docs.ceph.com/docs/master/start/quick-start-preflight/
http://docs.ceph.com/docs/master/start/quick-ceph-deploy/
While creating mon using comma
some tips:
1.if you enabled auth_cluster_required, you may shoud have a check
the keyring
2.can you reach the monitors from your admin node by ssh without passwd
2016-04-16 18:16 GMT+08:00 AJ NOURI :
> Followed the preflight and quick start
> http://docs.ceph.com/docs/master/start/quick-ceph-depl
Followed the preflight and quick start
http://docs.ceph.com/docs/master/start/quick-ceph-deploy/
Stuck here
ajn@admin-node:~/my-cluster$* ceph-deploy mon create-initial *
[ceph_deploy.conf][DEBUG ] found configuration file at:
/home/ajn/.cephdeploy.conf
[ceph_deploy.cli][INFO ] Invoked
10 matches
Mail list logo
