Hello,
On Thu, 12 Jan 2017 10:03:33 -0500 Sivaram Kannan wrote:
> Hi,
>
> Thanks for the reply. The public network I am talking about is an
> isolated network with no access to internet, but lot of compute
> traffic though. If it is more about security, I would try setting up
> both in the
Hi,
Thanks for the reply. The public network I am talking about is an
isolated network with no access to internet, but lot of compute
traffic though. If it is more about security, I would try setting up
both in the same network. My worry is more towards any performance
issues (due to re-balancing
Hi,
CEPH first time user here. I am trying to setup a ceph cluster. The
documentation (http://ceph.com/planet/bootstrap-your-ceph-cluster-in-docker/)
recommends a seperate network for control and data plane
1. Can i configure both control plane in the same network?
2. Is it so bad to configure
hi,all
i know ceph differentiates network, mostly it uses public and cluster
,heartbeat network.
do mon and mds have those network? i only know osd has.
is there a place to introduce ceph's network?
thanks.
___
ceph-users mailing list
Only the OSDs use the cluster network. OSD heartbeat use both networks, to
verify connectivity.
Check out the Network Configuration Reference:
http://ceph.com/docs/master/rados/configuration/network-config-ref/
On Mon, Aug 11, 2014 at 6:30 PM, yuelongguang fasts...@163.com wrote:
hi,all
i
The area I'm currently investigating is how to configure the
networking. To avoid a SPOF I'd like to have redundant switches for
both the public network and the internal network, most likely running
at 10Gb. I'm considering splitting the nodes in to two separate racks
and connecting each half
Hi Wido,
Thanks for the reply.
On Fri, Dec 20, 2013 at 08:14:13AM +0100, Wido den Hollander wrote:
On 12/18/2013 09:39 PM, Tim Bishop wrote:
I'm investigating and planning a new Ceph cluster starting with 6
nodes with currently planned growth to 12 nodes over a few years. Each
node will
On 12/18/2013 09:39 PM, Tim Bishop wrote:
Hi all,
I'm investigating and planning a new Ceph cluster starting with 6
nodes with currently planned growth to 12 nodes over a few years. Each
node will probably contain 4 OSDs, maybe 6.
The area I'm currently investigating is how to configure the
Hi all,
I'm investigating and planning a new Ceph cluster starting with 6
nodes with currently planned growth to 12 nodes over a few years. Each
node will probably contain 4 OSDs, maybe 6.
The area I'm currently investigating is how to configure the
networking. To avoid a SPOF I'd like to have
