On Wed, Feb 19, 2014 at 10:32 AM, NEVEU Stephane
stephane.ne...@thalesgroup.com wrote:
Hi all,
I'm trying to install a ceph cluster with one SSD sda (running the system on
sda1) sda2 is for swap and my OSD (I have only one OSD per node...) will be
sdb which is not an SSD but a 7200rpm disk.
On Sat, Feb 8, 2014 at 11:37 AM, Manuel Lanazca manuel81...@hotmail.com wrote:
Hello Team,
I am building a new cluster with cep-deply (emperor). I successfully
added 24 osds from a host, but when I have tried to add others OSDs from
the next host they do not mount. The new osds are
On Wed, Jan 22, 2014 at 11:39 AM, alistair.whit...@barclays.com wrote:
All,
I have a situation on my RHEL 6.4 cluster that seems to be caused by
ceph-deploy changing the file permissions on /etc/ceph/ceph.conf after
running a command such as “ceph-deploy mon create node2 node3”. The idea
HI Mordur,
I'm definitely straining my memory on this one, but happy to help if I can?
I'm pretty sure I did not figure it out -- you can see I didn't get
any feedback from the list. What I did do, however, was uninstall
everything and try the same setup with mkcephfs, which worked fine at
the
On Thu, Jan 9, 2014 at 9:45 AM, Travis Rhoden trho...@gmail.com wrote:
HI Mordur,
I'm definitely straining my memory on this one, but happy to help if I can?
I'm pretty sure I did not figure it out -- you can see I didn't get
any feedback from the list. What I did do, however, was uninstall
On Thu, Jan 9, 2014 at 9:48 AM, Alfredo Deza alfredo.d...@inktank.com wrote:
On Thu, Jan 9, 2014 at 9:45 AM, Travis Rhoden trho...@gmail.com wrote:
HI Mordur,
I'm definitely straining my memory on this one, but happy to help if I can?
I'm pretty sure I did not figure it out -- you can see I
Hi guys, thank you very much for your feedback. I'm new to Ceph, so I
ask you to be patient with my newbie-ness.
I'm dealing with the same issue although I'm not using ceph-deploy. I
installed manually (for learning purposes) a small test cluster of three
nodes, one to host the single mon and
The ceph-deploy git master should be able to handle wheezy/sid jessie/sid
strings now (and anything else following a/b syntax and not raise unless we
have flagged the version for non-support)
On Sun, Dec 1, 2013 at 6:38 PM, James Harper
james.har...@bendigoit.com.auwrote:
On Sun, Dec 1,
: Thursday, December 19, 2013 10:19 PM
To: Don Talton (dotalton)
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy issues with initial mons that aren't up
mon initial members is a race prevention mechanism whose purpose is to
prevent your monitors from forming separate quorums
-
From: Gregory Farnum [mailto:g...@inktank.com]
Sent: Thursday, December 19, 2013 10:19 PM
To: Don Talton (dotalton)
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy issues with initial mons that aren't up
mon initial members is a race prevention mechanism whose purpose
...@lists.ceph.com] On Behalf Of Don Talton (dotalton)
Sent: Friday, December 20, 2013 9:17 AM
To: Gregory Farnum
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy issues with initial mons that aren't up
This makes sense. So if other mons come up that are *not* defined as initial
mons
2013/12/17 Gandalf Corvotempesta gandalf.corvotempe...@gmail.com:
There isnt' anything about how to define a cluster network for OSD.
I don't know how to set a cluster address to each OSD.
No help about this? I would like to set a cluster-address for each OSD
Is this possible with ceph-deploy ?
I just realized my email is not clear. If the first mon is up and the
additional initials are not, then the process fails.
-Original Message-
From: ceph-users-boun...@lists.ceph.com [mailto:ceph-users-
boun...@lists.ceph.com] On Behalf Of Don Talton (dotalton)
Sent: Thursday,
mon initial members is a race prevention mechanism whose purpose is
to prevent your monitors from forming separate quorums when they're
brought up by automated software provisioning systems (by not allowing
monitors to form a quorum unless everybody in the list is a member).
If you want to add
On Tue, Dec 17, 2013 at 10:07 AM, Gandalf Corvotempesta
gandalf.corvotempe...@gmail.com wrote:
Hi to all
I'm playing with ceph-deploy for the first time.
Some questions:
1. how can I set a cluster network to be used by OSDs? Should I set it
manually?
The docs have a quick section to do
2013/12/17 Alfredo Deza alfredo.d...@inktank.com:
The docs have a quick section to do this with ceph-deploy
(http://ceph.com/docs/master/start/quick-ceph-deploy/)
Have you seen that before? Or do you need something that covers a
cluster in more detail?
There isnt' anything about how to define
This is a similar issue that we ran into, the root cause was that
ceph-deploy doesn't set the partition type guid (that is used to auto
activate the volume) on an existing partition. Setting this beforehand
while pre-creating the partition is a must or you have you put entries in
fstab.
On Mon,
On 9 December 2013 16:26, Andrew Woodward xar...@gmail.com wrote:
This is a similar issue that we ran into, the root cause was that
ceph-deploy doesn't set the partition type guid (that is used to auto
activate the volume) on an existing partition. Setting this beforehand
while pre-creating
https://github.com/ceph/ceph/blob/master/udev/95-ceph-osd.rules Lists the 4
variants, in your case it sounds like a normal ceph volume so the guid you
want is probably 4fbd7e29-9d25-41b8-afd0-062c0ceff05d.
You will need sgdisk to set the guid correctly (part of gdisk)
from man
-t,
On 9 December 2013 17:35, Andrew Woodward xar...@gmail.com wrote:
https://github.com/ceph/ceph/blob/master/udev/95-ceph-osd.rules Lists the
4 variants, in your case it sounds like a normal ceph volume so the guid
you want is probably 4fbd7e29-9d25-41b8-afd0-062c0ceff05d.
You will need sgdisk
@Alfredo - Is this something that ceph-deploy should do // or warn about?
or should we fix ceph-disk so that it set's the part guid on existing
partations?
On Mon, Dec 9, 2013 at 9:44 AM, Matthew Walster matt...@walster.org wrote:
On 9 December 2013 17:35, Andrew Woodward xar...@gmail.com
Matthew,
I'll flag this for future doc changes. I noticed that you didn't run
ceph-deploy gatherkeys after creating your monitor(s). Any reason for that
omission?
On Mon, Dec 9, 2013 at 3:49 AM, Matthew Walster matt...@walster.org wrote:
I'm having a play with ceph-deploy after some time away
John,
Good catch. I did run it, but missed it when reviewing my actions for this
post.
Matthew
On 9 Dec 2013 18:24, John Wilkins john.wilk...@inktank.com wrote:
Matthew,
I'll flag this for future doc changes. I noticed that you didn't run
ceph-deploy gatherkeys after creating your
On Mon, Dec 9, 2013 at 12:54 PM, Andrew Woodward xar...@gmail.com wrote:
@Alfredo - Is this something that ceph-deploy should do // or warn about? or
should we fix ceph-disk so that it set's the part guid on existing
partations?
This looks like an omission on our end. I've created
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Sunday, December 01, 2013 6:30 PM
To: Jonas Andersson
Cc: ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy 1.2.2 vs fedora 19
On Thu, Nov 28, 2013 at 8:25 AM, Jonas Andersson jonas.anders...@imc.nl wrote
[mailto:alfredo.d...@inktank.com]
Sent: Sunday, December 01, 2013 6:30 PM
To: Jonas Andersson
Cc: ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy 1.2.2 vs fedora 19
On Thu, Nov 28, 2013 at 8:25 AM, Jonas Andersson jonas.anders...@imc.nl
wrote:
Hi all,
I am seeing some
and compared the data?
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Thursday, December 05, 2013 3:34 PM
To: Jonas Andersson
Cc: ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy 1.2.2 vs fedora 19
On Thu, Dec 5, 2013 at 9:18 AM, Jonas Andersson
On Thu, Nov 28, 2013 at 8:25 AM, Jonas Andersson jonas.anders...@imc.nl wrote:
Hi all,
I am seeing some weirdness when trying to deploy Ceph Emperor on fedora 19
using ceph-deploy. Problem occurs when trying to install ceph-deploy, and
seems to point to the version of pushy in your
On Fri, Nov 29, 2013 at 1:35 AM, Alexis GÜNST HORN
alexis.gunsth...@outscale.com wrote:
Hello to all,
I use heavily ceph-deploy and it works really well.
I've just one question : is there an option (i have not found) or a way to let
ceph-deploy osd create ...
create an OSD with a weight of 0
On Fri, Nov 29, 2013 at 3:19 AM, James Harper
james.har...@bendigoit.com.au wrote:
When I do gatherkeys, ceph-deploy tells me:
UnsupportedPlatform: Platform is not supported: debian
Given that I downloaded ceph-deploy from the ceph.com debian
repository, I'm hoping that Debian is
On Sun, Dec 1, 2013 at 2:33 PM, James Harper
james.har...@bendigoit.com.au wrote:
On Fri, Nov 29, 2013 at 3:19 AM, James Harper
james.har...@bendigoit.com.au wrote:
When I do gatherkeys, ceph-deploy tells me:
UnsupportedPlatform: Platform is not supported: debian
Given that I
ceph-deploy uses Python to detect information for a given platform,
can you share what this command gives
as output?
python -c import platform; print platform.linux_distribution()
Servers that 'gatherkeys' does work on:
('debian', '7.1', '')
('debian', '7.2', '')
Servers that
On Sun, Dec 1, 2013 at 6:47 PM, James Harper
james.har...@bendigoit.com.au wrote:
ceph-deploy uses Python to detect information for a given platform,
can you share what this command gives
as output?
python -c import platform; print platform.linux_distribution()
Servers that 'gatherkeys'
On Sun, Dec 1, 2013 at 6:47 PM, James Harper
james.har...@bendigoit.com.au wrote:
ceph-deploy uses Python to detect information for a given platform,
can you share what this command gives
as output?
python -c import platform; print platform.linux_distribution()
Servers that
When I do gatherkeys, ceph-deploy tells me:
UnsupportedPlatform: Platform is not supported: debian
Given that I downloaded ceph-deploy from the ceph.com debian repository,
I'm hoping that Debian is supported and that I have something screwy
somewhere.
Any suggestions?
I just tried
I'm also getting similar problems, although in my installation, even though
there are errors, it seems to finish. (I'm using centos 6.4 and emperor
release and I added the defaults http and https to the sudoers file for
the ia1 node, though I didn't do so for the the ia2 and ia3 nodes.) So is
:48 AM
To: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy problems on CentOS-6.4
I'm also getting similar problems, although in my installation, even though
there are errors, it seems to finish. (I'm using centos 6.4 and emperor release
and I added the defaults http and https
Subject: Re: [ceph-users] ceph-deploy problems on CentOS-6.4
I'm also getting similar problems, although in my installation, even though
there are errors, it seems to finish. (I'm using centos 6.4 and emperor
release and I added the defaults http and https to the sudoers file for
the ia1 node
On Mon, Nov 18, 2013 at 1:12 PM, Gruher, Joseph R
joseph.r.gru...@intel.com wrote:
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Monday, November 18, 2013 6:34 AM
To: Gruher, Joseph R
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy disk
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Wednesday, November 20, 2013 7:17 AM
To: Gruher, Joseph R
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy disk zap fails but succeeds on retry
On Mon, Nov 18, 2013 at 1:12 PM, Gruher
On 19.11.2013 06:56, Robert van Leeuwen wrote:
Hi,
...
It looks like it is just using /dev/sdX for this instead of the
/dev/disk/by-id /by-path given by ceph-deploy.
...
Hi Robert,
I'm using the disk-label:
fstab:
LABEL=osd.0 /var/lib/ceph/osd/ceph-0 xfs noatime,nodiratime
0
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Monday, November 18, 2013 6:34 AM
To: Gruher, Joseph R
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy disk zap fails but succeeds on retry
I went ahead and created a ticket to track
I went ahead and created a ticket to track this, if you have any new
input, please make sure you add to
the actual ticket: http://tracker.ceph.com/issues/6793
Thanks for reporting the problem!
On Fri, Nov 15, 2013 at 4:22 PM, Alfredo Deza alfredo.d...@inktank.com wrote:
On Fri, Nov 15, 2013 at
On 19/11/13 18:56, Robert van Leeuwen wrote:
Hi,
Since the /dev/sdX device location could shuffle things up (and that would mess
things up) I'd like to use a more-persistent device path.
Since I'd like to be able to replace a disk without adjusting anything (e.g.
just formatting the disk)
Sorry, just spotted you're mounting on sdc. Can you chuck out a partx -v
/dev/sda to see if there's anything odd about the data currently on there?
-Michael
On 12/11/2013 18:22, Michael wrote:
As long as there's room on the SSD for the partitioner it'll just use
the conf value for osd journal
That did it! I didn't have to do -no-adjust-repos FYI.
Thanks a lot everyone esp. JG and AW. You guys are just phenomenal! Now I am
onto the next step of adding MONs and OSDs.
Thanks!
Narendra
From: Gruher, Joseph R [mailto:joseph.r.gru...@intel.com]
Sent: Tuesday, October 29, 2013 2:53 PM
To:
I can't remember how the ceph-deploy behaves in this case but it might
be worth trying manually installing the epel repo on one of the nodes
and then just doing a simple. ceph-deploy install #node# on a single
node to see if it behaves.
Otherwise you can try installing ceph manually using
On Tue, Oct 29, 2013 at 12:28 PM, Michael mich...@onlinefusion.co.uk wrote:
I can't remember how the ceph-deploy behaves in this case but it might be
worth trying manually installing the epel repo on one of the nodes and then
just doing a simple. ceph-deploy install #node# on a single node to
If you are behind a proxy try configuring the wget proxy through /etc/wgetrc.
I had a similar problem where I could complete wget commands manually but they
would fail in ceph-deploy until I configured the wget proxy in that manner.
From: ceph-users-boun...@lists.ceph.com
https_proxy
From: ceph-users-boun...@lists.ceph.com
[mailto:ceph-users-boun...@lists.ceph.com] On Behalf Of Gruher, Joseph R
Sent: Tuesday, October 29, 2013 4:55 PM
To: Trivedi, Narendra; ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy problems on CentOS-6.4
If you are behind
@lists.ceph.commailto:ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy problems on CentOS-6.4
If you are behind a proxy try configuring the wget proxy through /etc/wgetrc.
I had a similar problem where I could complete wget commands manually but they
would fail in ceph-deploy until I configured
[mailto:ceph-users-boun...@lists.ceph.com] On Behalf Of Gruher, Joseph R
Sent: Tuesday, October 29, 2013 4:55 PM
To: Trivedi, Narendra;
ceph-users@lists.ceph.commailto:ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy problems on CentOS-6.4
If you are behind a proxy try configuring
env_keep += http_proxy https_proxy
From: ceph-users-boun...@lists.ceph.com
[mailto:ceph-users-boun...@lists.ceph.com] On Behalf Of Gruher, Joseph R
Sent: Tuesday, October 29, 2013 4:55 PM
To: Trivedi, Narendra; ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy problems on CentOS-6.4
25, 2013 6:53 PM
To: Whittle, Alistair: Investment Bank (LDN)
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Fri, Oct 25, 2013 at 1:25 PM, alistair.whit...@barclays.com wrote:
I have an interesting problem I was hoping someone could help with.
My Red
@lists.ceph.com
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Fri, Oct 25, 2013 at 1:25 PM, alistair.whit...@barclays.com wrote:
I have an interesting problem I was hoping someone could help with.
My Red Hat servers are configured to use proxies to access the internet. I
have
:58 PM
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Mon, Oct 28, 2013 at 7:33 AM, alistair.whit...@barclays.com wrote:
Thanks, I already had the correct ceph-deply version, but had the flag in the
wrong place.
Solving that got me to the next problem... I get the following
: Investment Bank (LDN)
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Fri, Oct 25, 2013 at 1:25 PM, alistair.whit...@barclays.com wrote:
I have an interesting problem I was hoping someone could help with.
My Red Hat servers are configured to use proxies
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Mon, Oct 28, 2013 at 7:33 AM, alistair.whit...@barclays.com wrote:
Thanks, I already had the correct ceph-deply version, but had the flag in
the wrong place.
Solving that got me to the next problem... I get the following error
(LDN)
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Mon, Oct 28, 2013 at 7:33 AM, alistair.whit...@barclays.com wrote:
Thanks, I already had the correct ceph-deply version, but had the flag in
the wrong place.
Solving that got me to the next
[mailto:alfredo.d...@inktank.com]
Sent: Monday, October 28, 2013 12:29 PM
To: Whittle, Alistair: Investment Bank (LDN)
Cc: ceph-users@lists.ceph.com
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Mon, Oct 28, 2013 at 8:26 AM, alistair.whit...@barclays.com wrote:
I get Error: Nothing
Subject: Re: [ceph-users] Ceph-deploy, sudo and proxies
On Mon, Oct 28, 2013 at 8:37 AM, alistair.whit...@barclays.com wrote:
Yum tells me I have the following installed on the node:
ceph-deploy.noarch : Admin and deploy tool for Ceph
ceph-release.noarch : Ceph repository configuration
I
On Fri, Oct 25, 2013 at 1:25 PM, alistair.whit...@barclays.com wrote:
I have an interesting problem I was hoping someone could help with.
My Red Hat servers are configured to use proxies to access the internet. I
have managed to successfully add the Ceph repo install ceph-deploy on the
Try configuring the curl proxy in /root/.curlrc. I had a similar problem
earlier this week.
Overall I have to be sure to set all these proxies individually for ceph-deploy
to work on CentOS (Ubuntu is easier):
Curl: /root/.curlrc
rpm: /root/.rpmmacros
wget: /etc/wgetrc
yum: /etc/yum.conf
-Joe
On Wed, Oct 23, 2013 at 12:43 PM, Gruher, Joseph R
joseph.r.gru...@intel.com wrote:
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Did you tried working with the `--no-adjust-repos` flag in ceph-deploy ? It
will
allow you to tell ceph-deploy to just go and
On Tue, Oct 22, 2013 at 8:31 PM, Gruher, Joseph R
joseph.r.gru...@intel.com wrote:
This was resolved by setting the curl proxy (which conveniently was
identified as necessary in another email on this list just earlier today).
Overall I had to directly configure the proxies for wget, rpm and
Thanks all for the recommendation. I worked around by modifying the ceph-deploy
by giving and full path for sgdisk.
Thanks,
Guang
在 2013-10-16，下午10:47，Alfredo Deza alfredo.d...@inktank.com 写道：
On Tue, Oct 15, 2013 at 9:19 PM, Guang yguan...@yahoo.com wrote:
-bash-4.1$ which sgdisk
I'd guess that your sudo config has a very limited path list. On the
target hosts check the 'secure_path' entry in /etc/sudoers. E.g mine is
(Ubuntu 13.10):
$ sudo grep secure_path /etc/sudoers
Defaults
secure_path=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
On 19/10/13 03:19,
On Tue, Oct 15, 2013 at 9:19 PM, Guang yguan...@yahoo.com wrote:
-bash-4.1$ which sgdisk
/usr/sbin/sgdisk
Which path does ceph-deploy use?
That is unexpected... these are the paths that ceph-deploy uses:
'/usr/local/bin:/bin:/usr/bin:/usr/local/sbin:/usr/sbin:/sbin'
So `/usr/sbin/` is
On Tue, Oct 15, 2013 at 10:52 AM, Guang yguan...@yahoo.com wrote:
Hi ceph-users,
I am trying with the new ceph-deploy utility on RHEL6.4 and I came across a
new issue:
-bash-4.1$ ceph-deploy --version
1.2.7
-bash-4.1$ ceph-deploy disk zap server:/dev/sdb
[ceph_deploy.cli][INFO ] Invoked
-bash-4.1$ which sgdisk
/usr/sbin/sgdisk
Which path does ceph-deploy use?
Thanks,
Guang
On Oct 15, 2013, at 11:15 PM, Alfredo Deza wrote:
On Tue, Oct 15, 2013 at 10:52 AM, Guang yguan...@yahoo.com wrote:
Hi ceph-users,
I am trying with the new ceph-deploy utility on RHEL6.4 and I came
On Tue, 2013-10-08 at 11:55 +0200, Kees Bos wrote:
Hi,
It seems to me that ceph-deploy doesn't consider the [mon] and [osd]
sections of {cluster}.conf Is this intentional or will this be
implemented down the road.
Well, at least some of the [osd] section settings are effective (e.g.
Hi,
Try editing /etc/sudoers and changing following line:
Defaultsrequiretty
to
Defaults!requiretty
Thanks
PK
On Tue, Oct 8, 2013 at 1:49 PM, Alfredo Deza alfredo.d...@inktank.comwrote:
On Tue, Oct 8, 2013 at 1:09 PM, alistair.whit...@barclays.com wrote:
Hello,
I have
Dnia 2013-09-27, o godz. 15:30:21
Guang yguan...@yahoo.com napisał(a):
Hi ceph-users,
I recently deployed a ceph cluster with use of *ceph-deploy* utility,
on RHEL6.4, during the time, I came across a couple of issues /
questions which I would like to ask for your help.
1. ceph-deploy does
On Fri, Sep 27, 2013 at 3:30 AM, Guang yguan...@yahoo.com wrote:
Hi ceph-users,
I recently deployed a ceph cluster with use of *ceph-deploy* utility, on
RHEL6.4, during the time, I came across a couple of issues / questions which
I would like to ask for your help.
1. ceph-deploy does not
Am 23.09.2013 21:56:56, schrieb Alfredo Deza:
On Mon, Sep 23, 2013 at 11:23 AM, Bernhard Glomm
bernhard.gl...@ecologic.eu wrote:
Hi all,
something with ceph-deploy doesen't work at all anymore.
After an upgrade ceph-depoly failed to roll out a new monitor
with permission
On Tue, Sep 24, 2013 at 3:27 AM, Bernhard Glomm
bernhard.gl...@ecologic.euwrote:
Am 23.09.2013 21:56:56, schrieb Alfredo Deza:
On Mon, Sep 23, 2013 at 11:23 AM, Bernhard Glomm
bernhard.gl...@ecologic.eu wrote:
Hi all,
something with ceph-deploy doesen't work at all anymore.
After an
On Mon, Sep 23, 2013 at 11:23 AM, Bernhard Glomm bernhard.gl...@ecologic.eu
wrote:
Hi all,
something with ceph-deploy doesen't work at all anymore.
After an upgrade ceph-depoly failed to roll out a new monitor
with permission denied. are you root?
(obviously there shouldn't be a root login
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Can you try running ceph-deploy *without* sudo ?
Ah, OK, sure. Without sudo I end up hung here again:
ceph@cephtest01:~$ ceph-deploy install cephtest03 cephtest04 cephtest05
cephtest06
cut
[cephtest03][INFO ]
On Wed, Sep 18, 2013 at 11:54 PM, Gruher, Joseph R
joseph.r.gru...@intel.com wrote:
Using latest ceph-deploy:
ceph@cephtest01:/my-cluster$ sudo ceph-deploy --version
1.2.6
I get this failure:
ceph@cephtest01:/my-cluster$ sudo ceph-deploy install cephtest03 cephtest04
cephtest05
On Wed, Sep 18, 2013 at 2:56 PM, Warren Wang war...@wangspeed.com wrote:
Just got done deploying the largest ceph install I've had yet (9 boxes,
179TB), , and I used ceph-deploy, but not without much consternation. I
have a question before I file a bug report.
Is the expectation that the
On Mon, Sep 16, 2013 at 12:50 AM, Andy Schuette apsbi...@gmail.com wrote:
First-time list poster here, and I'm pretty stumped on this one. My
problem hasn't really been discussed on the list before, so I'm hoping
that I can get this figured out since it's stopping me from learning
more about
Hi,
I believe you need to tell apt about your proxy server:
cat /etc/apt/apt.conf
Acquire::http::Proxy http://my.proxy.server:3142;;
wogri
On 09/11/2013 08:28 AM, kumar rishabh wrote:
I am new to ceph.I am trying to follow the official document to install
ceph on the machine .All things
Title: signature
Alph
Salas
Ingeniero T.I
Kepler Data Recovery
Asturias
97, Las Condes
Santiago- Chile
(56 2) 2362 7504
asa...@kepler.cl
On Fri, Sep 6, 2013 at 11:17 AM, Gilles Mocellin
gilles.mocel...@nuagelibre.org wrote:
Perhaps it's worth a bug report, or some changes in ceph-deploy :
I've just deployed some test clusters with ceph-deploy on Debian Wheezy.
I had errors with ceph-deploy, when the destination node does not
Le 06/09/2013 17:37, Alfredo Deza a écrit :
On Fri, Sep 6, 2013 at 11:17 AM, Gilles Mocellin
gilles.mocel...@nuagelibre.org wrote:
Perhaps it's worth a bug report, or some changes in ceph-deploy :
I've just deployed some test clusters with ceph-deploy on Debian Wheezy.
I had errors with
On Wed, 4 Sep 2013, Alphe Salas Michels wrote:
Hi again,
as I was doomed to full wipe my cluster once again after. I uploaded to
ceph-deploy 1.2.3
all went smoothing along my ceph-deploy process.
until I create the mds and then
ceph-deploy mds create myhost provoked
first a
File
On Fri, Aug 30, 2013 at 6:17 AM, Bernhard Glomm
bernhard.gl...@ecologic.euwrote:
Is there an _actual_ howto, man page or other documentation
about ceph-deploy?
There are a couple of places for ceph-deploy documentation.
The first one is the Github project page:
...@inktank.com
Date: Tuesday, August 27, 2013 9:42 AM
To: Kevin Weiler
kevin.wei...@imc-chicago.commailto:kevin.wei...@imc-chicago.com
Cc: ceph-users@lists.ceph.commailto:ceph-users@lists.ceph.com
ceph-users@lists.ceph.commailto:ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy pushy
To: Kevin Weiler
kevin.wei...@imc-chicago.commailto:kevin.wei...@imc-chicago.com
Cc: ceph-users@lists.ceph.commailto:ceph-users@lists.ceph.com
ceph-users@lists.ceph.commailto:ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy pushy dependency problem
Hi Kevin -
The latest version
: +1 312-244-3301 | E-Mail:
kevin.wei...@imc-chicago.com
From: Gary Lowell gary.low...@inktank.com
Date: Tuesday, August 27, 2013 9:42 AM
To: Kevin Weiler kevin.wei...@imc-chicago.com
Cc: ceph-users@lists.ceph.com ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy pushy
...@inktank.com
Date: Tuesday, August 27, 2013 9:42 AM
To: Kevin Weiler kevin.wei...@imc-chicago.com
Cc: ceph-users@lists.ceph.com ceph-users@lists.ceph.com
Subject: Re: [ceph-users] ceph-deploy pushy dependency problem
Hi Kevin -
The latest version, ceph-deploy 1.2.2 in the ceph rpm-dumpling
I'm having the same issue on debian 7.1. When reinstalling ceph-deploy after
purge I get the following:
root@vl0181:~# aptitude install ceph-deploy
The following NEW packages will be installed:
ceph-deploy{b}
0 packages upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get
Hi Kevin -
The latest version, ceph-deploy 1.2.2 in the ceph rpm-dumpling repo should
have the correct dependency (see below).If doesn't work for you, or if you
are using a different repo please let me know.
Thanks,
Gary
ubuntu@jenkins:~/repos/rpm-dumpling/fc19/noarch$ rpm -q --requires
Hi Mike -
We released a 1.2.2 version recently that should have the correct dependency.
You may have to do an aptitude update to refresh the cache. I did a test
install on our debian wheezy system and that correctly updated the python pushy
package. let me know if you continue to have
Oeps, when creating the cluster I did:
Ceph-deploy -cluster mycluster new mynode
Van: Johannes Klarenbeek
Verzonden: zondag 25 augustus 2013 16:00
Aan: ceph-users@lists.ceph.com
Onderwerp: ceph-deploy mon create error: cannot load config 'ceph.conf'
Hey,
After some test deployments, I removed
Hi.
With this patch - is all ok.
Thanks for help!
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Wednesday, August 21, 2013 7:16 PM
To: Pavel Timoschenkov
Cc: ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy and journal on separate disk
On Wed
.
-Original Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Wednesday, August 21, 2013 7:16 PM
To: Pavel Timoschenkov
Cc: ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy and journal on separate disk
On Wed, Aug 21, 2013 at 9:33 AM, Pavel Timoschenkov
pa
Message-
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Monday, August 19, 2013 3:38 PM
To: Pavel Timoschenkov
Cc: ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy and journal on separate disk
On Fri, Aug 16, 2013 at 8:32 AM, Pavel Timoschenkov
pa
: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Monday, August 19, 2013 3:38 PM
To: Pavel Timoschenkov
Cc: ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy and journal on separate disk
On Fri, Aug 16, 2013 at 8:32 AM, Pavel Timoschenkov
pa...@bayonetteas.onmicrosoft.com wrote:
I
non-zero exit
status 32
From: Alfredo Deza [mailto:alfredo.d...@inktank.com]
Sent: Wednesday, August 14, 2013 7:44 PM
To: Pavel Timoschenkov
Cc: Samuel Just; ceph-us...@ceph.com
Subject: Re: [ceph-users] ceph-deploy and journal on separate disk
On Wed, Aug 14, 2013 at 10:47 AM, Pavel
201 - 300 of 379 matches
Mail list logo
