My SMS Server if failing to start after I updated the default configuration file with parameters submitted by my SMSC. Here if the file with the modifications:
# # SMSGateway configuration file # Test server config # # This is the IP address of SMSC ip-address=195.4.64.43 # Port to bind to port=9990 # Your system id system-id=test # Your password password=SMSt321 # The source address for this client source-ton=1 source-npi=1 # This is a made-up address source-address=00447887481736 # The address range this smpp client will serve # Generally the same as your source address addr-ton=1 addr-npi=1 address-range=00447887481736 # Message sending rate; how many messages per second is the # gateway allowed to send to your service provider. # This can be a decimal (i.e. 0.1). 0 is unlimited. # The default is 100 messages per second. message-rate=100.0 # The mode of the gateway; Either synchronous or asynchronous # In synchronous mode the gateway will wait for the response # from the server when sending a message and the SendGatewayMessage() # CFML function will return the SMS messageID of the message # or an empty string if their is an error. In asynchronous mode, # the gateway will not wait for a response and the SMS messageID # will NOT be returned from SendGatewayMessage(). # The default is synchronous. mode=synchronous # Should the gateway retry delivery on Network Errors? # If a network error occurs while trying to deliver a message, # should the message be queued for delivery when the gateway # is able to re-bind to the SMSC. This is useful if the gateway # is in asynchronous mode, where no error status is returned from # the CFML SendGatewayMessage() function. # The default is no. network-retry=no # Should the gateway retry delievery on Transient Errors? # If an error is returned from the SMSC that indicates # the message may be able to be delivered in the future, # should the gateway attemp to resend send the message? # This is useful if the gateway is in asynchronous mode, # where no error status is returned from the CFML # SendGatewayMessage() function. # The default is no. transient-retry=no ################################################## # Everything below here is usually OK. ################################################## # The function in the Gateway CFC which the is called # when an incoming message arrives. # cfc-method=onIncomingMessage # The default destination address info destination-ton=1 destination-npi=1 # You can't have a default destination # destination-address= # The service type can be empty or one of # the following values: # CMT, CPT, VMN, VMA, WAP or USSD # service-type= # From the spec: # Identifies the type of system requesting the bind. # This may enable SMSC responses which are # particular to a given type of ESME. system-type=SMPP # The receive timeout is a timeout for trying to receive a message # from the SMSC. If you want go to infinite wait until a PDU # is received, set the receive-timeout to -1. # The value is in seconds. The default is 30 seconds. receive-timeout=10 # The ping interval is how often the SMS Gateway will send an # EnquireLink PDU to the server to verify the health of the connection. # The value is in seconds. The default is 60 seconds. ping-interval=60 # The number of connection attempts the gateway will make until it gives up. # Use -1 to retry until connected. The default is -1 (try forever). retries=-1 # Connection retry interval; how long to wait between connection attemps. # The value is in seconds. The default is 10 seconds. retry-interval=10 What am I doing wrong? TIA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| Adobe® ColdFusion® 8 software 8 is the most important and dramatic release to date Get the Free Trial http://ad.doubleclick.net/clk;207172674;29440083;f Archive: http://www.houseoffusion.com/groups/cf-talk/message.cfm/messageid:315325 Subscription: http://www.houseoffusion.com/groups/cf-talk/subscribe.cfm Unsubscribe: http://www.houseoffusion.com/cf_lists/unsubscribe.cfm?user=11502.10531.4